Re: HP 9000 K200 (819) ... Headway made!!!
Rob Sciuk <[email protected]> Thu, 20 Dec 2007 16:19:40 -0500 (EST)
| Newsgroups | gmane.os.openbsd.hppa |
|---|---|
| Message-ID | <[email protected]> |
On Thu, 20 Dec 2007, Mark Kettenis wrote:
> Ok, I've put up another kernel, that should print some debug info.
>
> Can you give that one a go?
>
Mark,
Should I be setting up an NFS partition for booting? The initial boot
allowed me to perform an install, but could not find the hard drives.
I just figured that once we have a kernel which sees my drives, and boots
properly, I'll simply await the next snapshot, and install that using an
FTP install from the bootp machine ... Anyways, here's the verbose output
from the last kernel ...
Rob
Firmware Version 2.9
Duplex Console IO Dependent Code (IODC) revision 4
------------------------------------------------------------------------------
(c) Copyright 1990-1998, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor State Cache Size
--------- -------- --------------------- ----------------- ----------
0 100 MHz Active Functional 256 KB
1 100 MHz Idle Functional 256 KB
Central Bus Speed (in MHz) : 100
Available Memory (bytes) : 536870912
Good Memory Required (bytes): 19648512
Primary boot path: 10/0.6 (dec)
Alternate boot path: 10/12/5.2 (dec)
Console path: 10/4/0.0 (dec)
Keyboard path: 10/12/7.0 (dec)
Processor is starting autoboot process.
To discontinue, press any key within 10 seconds.
Boot terminated.
------- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command or menu > boot 10/12/6
Interact with IPL (Y or N)?> y
Booting...
Network Station Address 080009-f03aa2
Boot IO Dependent Code (IODC) revision 2
HARD Booted.
>> OpenBSD/hppa BOOT 0.8
|/-\|/-\|boot> boot bsd -c
booting lf0a:bsd: /-\|/-\|/-\|/-\|/-\|3600384/-\|+696320/-\|+69632/-\|+434176/- [52\|+175024/-\|+157338/-\|]=0x4f63f4
SPID bits: 0x0, error = -2
pdc_coproc: 0xc0, 0xc0; model b rev 1
[ using 332788 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.2-current (GENERIC) #41: Thu Dec 20 21:06:35 CET 2007
[email protected]:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/819/K200 (KittyHawk DC2 100) PA-RISC 1.1a
real mem = 536870912 (524288 reserved for PROM, 6266880 used by OpenBSD)
avail mem = 519585792
User Kernel Config
UKC> verbose
autoconf verbose enabled
UKC> quit
Continuing...
>>> probing for mainbus0
>>> mainbus probe returned 1
mainbus0 at root [flex fff80000]
>>> probing for pdc0
>>> pdc probe returned 1
>>> probing for power0
>>> power probe returned 1
>>> probing for lcd0
>>> lcd probe returned 0
>>> probing for mem*
>>> mem probe returned 0
>>> probing for cpu*
>>> cpu probe returned 0
>>> probing for phantomas0
>>> phantomas probe returned 0
>>> probing for uturn0
>>> uturn probe returned 0
>>> probing for uturn1
>>> uturn probe returned 0
>>> probing for astro*
>>> astro probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi1
>>> lasi probe returned 0
>>> probing for asp*
>>> asp probe returned 0
>>> probing for wax*
>>> wax probe returned 0
>>> probing for mongoose*
>>> mongoose probe returned 0
>>> probing for sti0
>>> sti probe returned 0
>>> probing for sti1
>>> sti probe returned 0
>>> probing for siop*
>>> siop probe returned 0
>>> pdc probe won
pdc0 at mainbus0
>>> probing for power0
>>> power probe returned 1
>>> probing for lcd0
>>> lcd probe returned 0
>>> probing for mem*
>>> mem probe returned 0
>>> probing for cpu*
>>> cpu probe returned 0
>>> probing for phantomas0
>>> phantomas probe returned 0
>>> probing for uturn0
>>> uturn probe returned 0
>>> probing for uturn1
>>> uturn probe returned 0
>>> probing for astro*
>>> astro probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi1
>>> lasi probe returned 0
>>> probing for asp*
>>> asp probe returned 0
>>> probing for wax*
>>> wax probe returned 0
>>> probing for mongoose*
>>> mongoose probe returned 0
>>> probing for sti0
>>> sti probe returned 0
>>> probing for sti1
>>> sti probe returned 0
>>> probing for siop*
>>> siop probe returned 0
>>> power probe won
power0 at mainbus0: not available
mod_index 63 error -5
mod_index 62 error -5
mod_index 61 error -5
mod_index 60 error -5
mod_index 59 error -5
mod_index 58 error -5
mod_index 57 error -5
mod_index 56 error -5
mod_index 55 error -5
mod_index 54 error -5
mod_index 53 error -5
mod_index 52 error -5
mod_index 51 error -5
mod_index 50 error -5
mod_index 49 error -5
mod_index 48 error -5
mod_index 47 error -5
mod_index 46 error -5
mod_index 45 error -5
mod_index 44 error -5
mod_index 43 error -5
mod_index 42 error -5
mod_index 41 error -5
mod_index 40 error -5
mod_index 39 error -5
mod_index 38 error -5
mod_index 37 error -5
mod_index 36 error -5
mod_index 35 error -5
mod_index 34 error -5
mod_index 33 error -5
mod_index 32 error -5
mod_index 31 error -5
mod_index 30 error -5
mod_index 29 error -5
mod_index 28 error -5
mod_index 27 error -5
mod_index 26 error -5
mod_index 25 error -5
mod_index 24 error -5
mod_index 23 error -5
mod_index 22 error -5
mod_index 21 error -5
mod_index 20 error -5
mod_index 19 error -5
mod_index 18 error -5
mod_index 17 error -5
mod_index 16 error -5
mod_index 15 error -5
mod_index 14 error -5
mod_index 13 error -5
mod_index 12 error -5
mod_index 11 error -5
mod_index 10 error -5
mod_index 9 error -5
mod_index 8 error -5
mod_index 7 error -5
mod_index 6 error -5
mod_index 5 bc -1/-1/-1/-1/10/12 mod 8
mod_index 4 bc -1/-1/-1/-1/10/12 mod 7
mod_index 3 bc -1/-1/-1/-1/10/12 mod 0
mod_index 2 bc -1/-1/-1/-1/10/12 mod 6
mod_index 1 bc -1/-1/-1/-1/10/12 mod 5
mod_index 0 bc -1/-1/-1/-1/-1/10 mod 12
>> HPA 0xfffbf000[0x0]
>> iodc_data error -4
>> HPA 0xfffbe000[0x0]
>> iodc_data error -4
>> HPA 0xfffbd000[0x0]
>> iodc_data error -4
>> HPA 0xfffbc000[0x0]
>> iodc_data error -4
>> HPA 0xfffbb000[0x0]
>> iodc_data error -4
>> HPA 0xfffba000[0x0]
>> iodc_data error -4
>> HPA 0xfffb9000[0x0]
>> iodc_data error -4
>> HPA 0xfffb8000[0x0]
>> iodc_data error -4
>> HPA 0xfffb7000[0x0]
>> iodc_data error -4
>> HPA 0xfffb6000[0x0]
>> iodc_data error -4
>> HPA 0xfffb5000[0x0]
>> iodc_data error -4
>> HPA 0xfffb4000[0x0]
>> iodc_data error -4
>> HPA 0xfffb3000[0x0]
>> iodc_data error -4
>> HPA 0xfffb2000[0x0]
>> iodc_data error -4
>> HPA 0xfffb1000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/-1 mod 31 hpa fffb1000 type 1 sv 9
>>> probing for lcd0
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> lcd probe returned 0
>>> probing for mem*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> mem probe returned 1
>>> probing for cpu*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> cpu probe returned 0
>>> probing for phantomas0
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> phantomas probe returned 0
>>> probing for uturn0
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for uturn1
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for astro*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> astro probe returned 0
>>> probing for lasi0
>> hpa fffb1000 off ffb1000 cf_off 100000
>>> lasi probe returned 0
>>> probing for lasi0
>> hpa fffb1000 off ffb1000 cf_off fd00000
>>> lasi probe returned 0
>>> probing for lasi1
>> hpa fffb1000 off ffb1000 cf_off 500000
>>> lasi probe returned 0
>>> probing for asp*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> asp probe returned 0
>>> probing for wax*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for mongoose*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> mongoose probe returned 0
>>> probing for sti0
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> siop probe returned 0
>>> mem probe won
mem0 at mainbus0 offset ffb1000: size 512MB
>> HPA 0xfffb0000[0x0]
>> iodc_data error -4
>> HPA 0xfffaf000[0x0]
>> iodc_data error -4
>> HPA 0xfffae000[0x0]
>> iodc_data error -4
>> HPA 0xfffad000[0x0]
>> iodc_data error -4
>> HPA 0xfffac000[0x0]
>> iodc_data error -4
>> HPA 0xfffab000[0x0]
>> iodc_data error -4
>> HPA 0xfffaa000[0x0]
>> iodc_data error -4
>> HPA 0xfffa9000[0x0]
>> iodc_data error -4
>> HPA 0xfffa8000[0x0]
>> iodc_data error -4
>> HPA 0xfffa7000[0x0]
>> iodc_data error -4
>> HPA 0xfffa6000[0x0]
>> iodc_data error -4
>> HPA 0xfffa5000[0x0]
>> iodc_data error -4
>> HPA 0xfffa4000[0x0]
>> iodc_data error -4
>> HPA 0xfffa3000[0x0]
>> iodc_data error -4
>> HPA 0xfffa2000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/-1 mod 22 hpa fffa2000 type 0 sv 4
>>> probing for lcd0
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> lcd probe returned 0
>>> probing for mem*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> mem probe returned 0
>>> probing for cpu*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> cpu probe returned 1
>>> probing for phantomas0
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> phantomas probe returned 0
>>> probing for uturn0
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for uturn1
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for astro*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> astro probe returned 0
>>> probing for lasi0
>> hpa fffa2000 off ffa2000 cf_off 100000
>>> lasi probe returned 0
>>> probing for lasi0
>> hpa fffa2000 off ffa2000 cf_off fd00000
>>> lasi probe returned 0
>>> probing for lasi1
>> hpa fffa2000 off ffa2000 cf_off 500000
>>> lasi probe returned 0
>>> probing for asp*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> asp probe returned 0
>>> probing for wax*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for mongoose*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> mongoose probe returned 0
>>> probing for sti0
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> siop probe returned 0
>>> cpu probe won
cpu0 at mainbus0 offset ffa2000 irq 31: PCXT' L1-B 100MHz, FPU PCXT' (Tornado) rev 1
cpu0: 256K(32b/l) Icache, 258K(32b/l) wr-back Dcache, 120 coherent TLB, 16 BTLB
>> HPA 0xfffa1000[0x0]
>> iodc_data error -4
>> HPA 0xfffa0000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/-1 mod 20 hpa fffa0000 type 0 sv 4
>>> probing for lcd0
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> lcd probe returned 0
>>> probing for mem*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> mem probe returned 0
>>> probing for cpu*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> cpu probe returned 0
>>> probing for phantomas0
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> phantomas probe returned 0
>>> probing for uturn0
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for uturn1
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for astro*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> astro probe returned 0
>>> probing for lasi0
>> hpa fffa0000 off ffa0000 cf_off 100000
>>> lasi probe returned 0
>>> probing for lasi0
>> hpa fffa0000 off ffa0000 cf_off fd00000
>>> lasi probe returned 0
>>> probing for lasi1
>> hpa fffa0000 off ffa0000 cf_off 500000
>>> lasi probe returned 0
>>> probing for asp*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> asp probe returned 0
>>> probing for wax*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for mongoose*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> mongoose probe returned 0
>>> probing for sti0
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> siop probe returned 0
>>> no winning probe
"PA-RISC" at mainbus0 (type 0 sv 4 mod 58 hv b0) offset ffa0000 not configured
>> HPA 0xfff9f000[0x0]
>> iodc_data error -4
>> HPA 0xfff9e000[0x0]
>> iodc_data error -4
>> HPA 0xfff9d000[0x0]
>> iodc_data error -4
>> HPA 0xfff9c000[0x0]
>> iodc_data error -4
>> HPA 0xfff9b000[0x0]
>> iodc_data error -4
>> HPA 0xfff9a000[0x0]
>> iodc_data error -4
>> HPA 0xfff99000[0x0]
>> iodc_data error -4
>> HPA 0xfff98000[0x0]
>> iodc_data error -4
>> HPA 0xfff97000[0x0]
>> iodc_data error -4
>> HPA 0xfff96000[0x0]
>> iodc_data error -4
>> HPA 0xfff95000[0x0]
>> iodc_data error -4
>> HPA 0xfff94000[0x0]
>> iodc_data error -4
>> HPA 0xfff93000[0x0]
>> iodc_data error -4
>> HPA 0xfff92000[0x0]
>> iodc_data error -4
>> HPA 0xfff91000[0x0]
>> iodc_data error -4
>> HPA 0xfff90000[0x0]
>> iodc_data error -4
>> HPA 0xfff8f000[0x0]
>> iodc_data error -4
>> HPA 0xfff8e000[0x0]
>> iodc_data error -4
>> HPA 0xfff8d000[0x0]
>> iodc_data error -4
>> HPA 0xfff8c000[0x0]
>> iodc_data error -4
>> HPA 0xfff8b000[0x0]
>> iodc_data error -4
>> HPA 0xfff8a000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/-1 mod a hpa fff8a000 type c sv b
>>> probing for lcd0
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> lcd probe returned 0
>>> probing for mem*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> mem probe returned 0
>>> probing for cpu*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> cpu probe returned 0
>>> probing for phantomas0
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> phantomas probe returned 0
>>> probing for uturn0
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> uturn probe returned 1
>>> probing for uturn1
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> uturn probe returned 1
>>> probing for astro*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> astro probe returned 0
>>> probing for lasi0
>> hpa fff8a000 off ff8a000 cf_off 100000
>>> lasi probe returned 0
>>> probing for lasi0
>> hpa fff8a000 off ff8a000 cf_off fd00000
>>> lasi probe returned 0
>>> probing for lasi1
>> hpa fff8a000 off ff8a000 cf_off 500000
>>> lasi probe returned 0
>>> probing for asp*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> asp probe returned 0
>>> probing for wax*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for mongoose*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> mongoose probe returned 0
>>> probing for sti0
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> siop probe returned 0
>>> uturn probe won
uturn0 at mainbus0 offset ff8a000: U2 rev 7
>> ADDRS: 0xffd0c000[0x1000] 0xffc00000[0x380000]
>> HPA 0xffd00000[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/-1/10 mod c hpa ffd00000 type b sv 81
>>> probing for lasi0
>> hpa ffd00000 off fd00000 cf_off fd00000
>>> lasi probe returned 1
>>> probing for wax*
>> hpa ffd00000 off fd00000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for dino0
>> hpa ffd00000 off fd00000 cf_off ffffffff
>>> dino probe returned 0
>>> probing for sti0
>> hpa ffd00000 off fd00000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa ffd00000 off fd00000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa ffd00000 off fd00000 cf_off ffffffff
>>> siop probe returned 0
>>> lasi probe won
lasi0 at uturn0 offset fd00000 irq 28: rev 3.0
>>> probing for gsc0
>>> gsc probe returned 1
>>> gsc probe won
gsc0 at lasi0: wordleds
>> HPA 0xffd08100[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/10/12 mod 8 hpa ffd08100 type a sv 84
>>> probing for com1
>> hpa ffd08100 off 8100 cf_off 822000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd08100 off 8100 cf_off 5000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd08100 off 8100 cf_off 823000
>>> com probe returned 0
>>> probing for lpt0
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> lpt probe returned 0
>>> probing for com2
>> hpa ffd08100 off 8100 cf_off 0
>>> com probe returned 0
>>> probing for com2
>> hpa ffd08100 off 8100 cf_off 4040
>>> com probe returned 0
>>> probing for com3
>> hpa ffd08100 off 8100 cf_off 4060
>>> com probe returned 0
>>> probing for ie0
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> ie probe returned 0
>>> probing for osiop*
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> osiop probe returned 0
>>> probing for oosiop*
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> oosiop probe returned 0
>>> probing for hil*
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> hil probe returned 0
>>> probing for harmony*
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> harmony probe returned 0
>>> probing for gsckbc*
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> gsckbc probe returned 1
>>> gsckbc probe won
gsckbc0 at gsc0 offset 8100 irq 26
>> HPA 0xffd08000[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/10/12 mod 7 hpa ffd08000 type a sv 84
>>> probing for com1
>> hpa ffd08000 off 8000 cf_off 822000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd08000 off 8000 cf_off 5000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd08000 off 8000 cf_off 823000
>>> com probe returned 0
>>> probing for lpt0
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> lpt probe returned 0
>>> probing for com2
>> hpa ffd08000 off 8000 cf_off 0
>>> com probe returned 0
>>> probing for com2
>> hpa ffd08000 off 8000 cf_off 4040
>>> com probe returned 0
>>> probing for com3
>> hpa ffd08000 off 8000 cf_off 4060
>>> com probe returned 0
>>> probing for ie0
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> ie probe returned 0
>>> probing for osiop*
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> osiop probe returned 0
>>> probing for oosiop*
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> oosiop probe returned 0
>>> probing for hil*
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> hil probe returned 0
>>> probing for harmony*
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> harmony probe returned 0
>>> probing for gsckbc*
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> gsckbc probe returned 1
>>> gsckbc probe won
gsckbc1 at gsc0 offset 8000 irq 26
>> ADDRS: 0xffd01000[0x1000] 0xffd03000[0x1000]
>> HPA 0xffd02000[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/10/12 mod 0 hpa ffd02000 type a sv 74
>>> probing for com1
>> hpa ffd02000 off 2000 cf_off 822000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd02000 off 2000 cf_off 5000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd02000 off 2000 cf_off 823000
>>> com probe returned 0
>>> probing for lpt0
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> lpt probe returned 1
>>> probing for com2
>> hpa ffd02000 off 2000 cf_off 0
>>> com probe returned 0
>>> probing for com2
>> hpa ffd02000 off 2000 cf_off 4040
>>> com probe returned 0
>>> probing for com3
>> hpa ffd02000 off 2000 cf_off 4060
>>> com probe returned 0
>>> probing for ie0
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> ie probe returned 0
>>> probing for osiop*
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> osiop probe returned 0
>>> probing for oosiop*
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> oosiop probe returned 0
>>> probing for hil*
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> hil probe returned 0
>>> probing for harmony*
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> harmony probe returned 0
>>> probing for gsckbc*
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> gsckbc probe returned 0
>>> lpt probe won
lpt0 at gsc0 offset 2000 irq 7
>> HPA 0xffd07000[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/10/12 mod 6 hpa ffd07000 type a sv 8a
>>> probing for com1
>> hpa ffd07000 off 7000 cf_off 822000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd07000 off 7000 cf_off 5000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd07000 off 7000 cf_off 823000
>>> com probe returned 0
>>> probing for com2
>> hpa ffd07000 off 7000 cf_off 0
>>> com probe returned 0
>>> probing for com2
>> hpa ffd07000 off 7000 cf_off 4040
>>> com probe returned 0
>>> probing for com3
>> hpa ffd07000 off 7000 cf_off 4060
>>> com probe returned 0
>>> probing for ie0
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> ie probe returned 1
>>> probing for osiop*
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> osiop probe returned 0
>>> probing for oosiop*
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> oosiop probe returned 0
>>> probing for hil*
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> hil probe returned 0
>>> probing for harmony*
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> harmony probe returned 0
>>> probing for gsckbc*
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> gsckbc probe returned 0
>>> ie probe won
ie0 at gsc0 offset 7000 irq 8: LASI/i82596CA v1.0, address 08:00:09:f0:3a:a2
>> HPA 0xffd06000[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/10/12 mod 5 hpa ffd06000 type a sv 82
>>> probing for com1
>> hpa ffd06000 off 6000 cf_off 822000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd06000 off 6000 cf_off 5000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd06000 off 6000 cf_off 823000
>>> com probe returned 0
>>> probing for com2
>> hpa ffd06000 off 6000 cf_off 0
>>> com probe returned 0
>>> probing for com2
>> hpa ffd06000 off 6000 cf_off 4040
>>> com probe returned 0
>>> probing for com3
>> hpa ffd06000 off 6000 cf_off 4060
>>> com probe returned 0
>>> probing for osiop*
>> hpa ffd06000 off 6000 cf_off ffffffff
>>> osiop probe returned 1
>>> probing for oosiop*
>> hpa ffd06000 off 6000 cf_off ffffffff
>>> oosiop probe returned 0
>>> probing for hil*
>> hpa ffd06000 off 6000 cf_off ffffffff
>>> hil probe returned 0
>>> probing for harmony*
>> hpa ffd06000 off 6000 cf_off ffffffff
>>> harmony probe returned 0
>>> probing for gsckbc*
>> hpa ffd06000 off 6000 cf_off ffffffff
>>> gsckbc probe returned 0
>>> osiop probe won
osiop0 at gsc0 offset 6000 irq 9: NCR53C710 rev 2, 40MHz, SCSI ID 7
>>> probing for scsibus*
>>> scsibus probe returned 1
>>> scsibus probe won
scsibus0 at osiop0: 8 targets
osiop0: target 0 now using 8 bit 10 MHz 8 REQ/ACK offset xfers
>>> probing for cd*
>>> cd probe returned 0
>>> probing for ch*
>>> ch probe returned 0
>>> probing for sd*
>>> sd probe returned 0
>>> probing for st*
>>> st probe returned 2
>>> probing for ss*
>>> ss probe returned 0
>>> probing for uk*
>>> uk probe returned 1
>>> probing for safte*
>>> safte probe returned 0
>>> probing for ses*
>>> ses probe returned 0
>>> st probe won
st0 at scsibus0 targ 0 lun 0: <HP, C1533A, AN04> SCSI2 1/sequential removable
osiop0: target 2 now using 8 bit 4 MHz 8 REQ/ACK offset xfers
>>> probing for cd*
>>> cd probe returned 2
>>> probing for ch*
>>> ch probe returned 0
>>> probing for sd*
>>> sd probe returned 0
>>> probing for st*
>>> st probe returned 0
>>> probing for ss*
>>> ss probe returned 0
>>> probing for uk*
>>> uk probe returned 1
>>> probing for safte*
>>> safte probe returned 0
>>> probing for ses*
>>> ses probe returned 0
>>> cd probe won
cd0 at scsibus0 targ 2 lun 0: <TOSHIBA, CD-ROM XM-5401TA, 3115> SCSI2 5/cdrom removable
>> HPA 0xfff89000[0x0]
>> iodc_data error -4
>> HPA 0xfff88000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/-1 mod 8 hpa fff88000 type c sv b
>>> probing for lcd0
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> lcd probe returned 0
>>> probing for mem*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> mem probe returned 0
>>> probing for cpu*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> cpu probe returned 0
>>> probing for phantomas0
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> phantomas probe returned 0
>>> probing for uturn1
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> uturn probe returned 1
>>> probing for astro*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> astro probe returned 0
>>> probing for lasi1
>> hpa fff88000 off ff88000 cf_off 500000
>>> lasi probe returned 0
>>> probing for asp*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> asp probe returned 0
>>> probing for wax*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for mongoose*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> mongoose probe returned 0
>>> probing for sti0
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> siop probe returned 0
>>> uturn probe won
uturn1 at mainbus0 offset ff88000: U2 rev 7
>> HPA 0xfff87000[0x0]
>> iodc_data error -4
>> HPA 0xfff86000[0x0]
>> iodc_data error -4
>> HPA 0xfff85000[0x0]
>> iodc_data error -4
>> HPA 0xfff84000[0x0]
>> iodc_data error -4
>> HPA 0xfff83000[0x0]
>> iodc_data error -4
>> HPA 0xfff82000[0x0]
>> iodc_data error -4
>> HPA 0xfff81000[0x0]
>> iodc_data error -4
>> HPA 0xfff80000[0x0]
>> iodc_data error -4
biomask 0x7 netmask 0xf ttymask 0x3f
bootpath: 10/12/6.10000.d03b0040.f45e1a89.5cb5fe03.c0a8450b.c0a84558 class=4098 flags=0 hpa=0xffd07000 spa=0x0 io=0xc000
>>> probing for softraid0
>>> softraid probe returned 1
softraid0 at root
nfs_boot: using interface ie0, with revarp & bootparams
panic: revarp failed, error=51
Stopped at Debugger+0x18: break 0,5
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
Debugger(417d78,4aee14,0,3a8) at Debugger+0x18
panic(42daf8,33,1ccd1216,0) at panic+0x104
panic(4bb000,c08fa800,4ac90c,0) at panic+0xdc
nfs_boot_init(0,4d,f0140000,506000) at nfs_boot_init+0x2e8
nfs_mountroot(413a44,413984,0,506000) at nfs_mountroot+0x84
vfs_mountroot(6d1c5bdc,36b57747,9b5abba3,cdad5dd1) at vfs_mountroot+0x2c
main(0,0,0,0) at main+0x7b8
-- trap #0
$start+0x154:
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
4 0 0 0 2 0x100600 pfpurge
3 0 0 0 3 0x100200 bored syswq
2 0 0 0 3 0x100200 idle0
1 0 0 0 3 0 initexec swapper
* 0 -1 0 0 7 0x80200 swapper
ddb> ~[scanner].Connected.
Connected.
Disconnected.