Re: HP 9000 K200 (819) ... Eureka (found the Barracudas!)
Rob Sciuk <[email protected]> Fri, 21 Dec 2007 10:27:53 -0500 (EST)
| Newsgroups | gmane.os.openbsd.hppa |
|---|---|
| Message-ID | <[email protected]> |
Mark,
It seems that we've (you've 8-) found the hard drives on the SCSI bus, and
the boot failed at the NFS init spot ... Should I be setting up NFS drives
for this puppy? Nice work!
Rob.
HARD Booted.
>> OpenBSD/hppa BOOT 0.8
|/-\|/-\|boot> boot bsd -c
booting lf0a:bsd: /-\|/-\|/-\|/-\|/-\|3600384/-\|+696320/-\|+69632/-\|+434176/- [52\|+175008/-\|+157322/-\|]=0x4f63d4
SPID bits: 0x0, error = -2
pdc_coproc: 0xc0, 0xc0; model b rev 1
[ using 332756 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.2-current (GENERIC) #44: Fri Dec 21 00:44:15 CET 2007
[email protected]:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/819/K200 (KittyHawk DC2 100) PA-RISC 1.1a
real mem = 536870912 (524288 reserved for PROM, 6266880 used by OpenBSD)
avail mem = 519585792
User Kernel Config
UKC> verbose
autoconf verbose enabled
UKC> quit
Continuing...
>>> probing for mainbus0
>>> mainbus probe returned 1
mainbus0 at root [flex fff80000]
>>> probing for pdc0
>>> pdc probe returned 1
>>> probing for power0
>>> power probe returned 1
>>> probing for lcd0
>>> lcd probe returned 0
>>> probing for mem*
>>> mem probe returned 0
>>> probing for cpu*
>>> cpu probe returned 0
>>> probing for phantomas0
>>> phantomas probe returned 0
>>> probing for uturn0
>>> uturn probe returned 0
>>> probing for uturn1
>>> uturn probe returned 0
>>> probing for astro*
>>> astro probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi1
>>> lasi probe returned 0
>>> probing for asp*
>>> asp probe returned 0
>>> probing for wax*
>>> wax probe returned 0
>>> probing for mongoose*
>>> mongoose probe returned 0
>>> probing for sti0
>>> sti probe returned 0
>>> probing for sti1
>>> sti probe returned 0
>>> probing for siop*
>>> siop probe returned 0
>>> pdc probe won
pdc0 at mainbus0
>>> probing for power0
>>> power probe returned 1
>>> probing for lcd0
>>> lcd probe returned 0
>>> probing for mem*
>>> mem probe returned 0
>>> probing for cpu*
>>> cpu probe returned 0
>>> probing for phantomas0
>>> phantomas probe returned 0
>>> probing for uturn0
>>> uturn probe returned 0
>>> probing for uturn1
>>> uturn probe returned 0
>>> probing for astro*
>>> astro probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi1
>>> lasi probe returned 0
>>> probing for asp*
>>> asp probe returned 0
>>> probing for wax*
>>> wax probe returned 0
>>> probing for mongoose*
>>> mongoose probe returned 0
>>> probing for sti0
>>> sti probe returned 0
>>> probing for sti1
>>> sti probe returned 0
>>> probing for siop*
>>> siop probe returned 0
>>> power probe won
power0 at mainbus0: not available
>> HPA 0xfffbf000[0x0]
>> iodc_data error -4
>> HPA 0xfffbe000[0x0]
>> iodc_data error -4
>> HPA 0xfffbd000[0x0]
>> iodc_data error -4
>> HPA 0xfffbc000[0x0]
>> iodc_data error -4
>> HPA 0xfffbb000[0x0]
>> iodc_data error -4
>> HPA 0xfffba000[0x0]
>> iodc_data error -4
>> HPA 0xfffb9000[0x0]
>> iodc_data error -4
>> HPA 0xfffb8000[0x0]
>> iodc_data error -4
>> HPA 0xfffb7000[0x0]
>> iodc_data error -4
>> HPA 0xfffb6000[0x0]
>> iodc_data error -4
>> HPA 0xfffb5000[0x0]
>> iodc_data error -4
>> HPA 0xfffb4000[0x0]
>> iodc_data error -4
>> HPA 0xfffb3000[0x0]
>> iodc_data error -4
>> HPA 0xfffb2000[0x0]
>> iodc_data error -4
>> HPA 0xfffb1000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/-1 mod 31 hpa fffb1000 type 1 sv 9
>>> probing for lcd0
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> lcd probe returned 0
>>> probing for mem*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> mem probe returned 1
>>> probing for cpu*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> cpu probe returned 0
>>> probing for phantomas0
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> phantomas probe returned 0
>>> probing for uturn0
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for uturn1
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for astro*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> astro probe returned 0
>>> probing for lasi0
>> hpa fffb1000 off ffb1000 cf_off 100000
>>> lasi probe returned 0
>>> probing for lasi0
>> hpa fffb1000 off ffb1000 cf_off fd00000
>>> lasi probe returned 0
>>> probing for lasi1
>> hpa fffb1000 off ffb1000 cf_off 500000
>>> lasi probe returned 0
>>> probing for asp*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> asp probe returned 0
>>> probing for wax*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for mongoose*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> mongoose probe returned 0
>>> probing for sti0
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa fffb1000 off ffb1000 cf_off ffffffff
>>> siop probe returned 0
>>> mem probe won
mem0 at mainbus0 offset ffb1000: size 512MB
>> HPA 0xfffb0000[0x0]
>> iodc_data error -4
>> HPA 0xfffaf000[0x0]
>> iodc_data error -4
>> HPA 0xfffae000[0x0]
>> iodc_data error -4
>> HPA 0xfffad000[0x0]
>> iodc_data error -4
>> HPA 0xfffac000[0x0]
>> iodc_data error -4
>> HPA 0xfffab000[0x0]
>> iodc_data error -4
>> HPA 0xfffaa000[0x0]
>> iodc_data error -4
>> HPA 0xfffa9000[0x0]
>> iodc_data error -4
>> HPA 0xfffa8000[0x0]
>> iodc_data error -4
>> HPA 0xfffa7000[0x0]
>> iodc_data error -4
>> HPA 0xfffa6000[0x0]
>> iodc_data error -4
>> HPA 0xfffa5000[0x0]
>> iodc_data error -4
>> HPA 0xfffa4000[0x0]
>> iodc_data error -4
>> HPA 0xfffa3000[0x0]
>> iodc_data error -4
>> HPA 0xfffa2000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/-1 mod 22 hpa fffa2000 type 0 sv 4
>>> probing for lcd0
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> lcd probe returned 0
>>> probing for mem*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> mem probe returned 0
>>> probing for cpu*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> cpu probe returned 1
>>> probing for phantomas0
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> phantomas probe returned 0
>>> probing for uturn0
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for uturn1
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for astro*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> astro probe returned 0
>>> probing for lasi0
>> hpa fffa2000 off ffa2000 cf_off 100000
>>> lasi probe returned 0
>>> probing for lasi0
>> hpa fffa2000 off ffa2000 cf_off fd00000
>>> lasi probe returned 0
>>> probing for lasi1
>> hpa fffa2000 off ffa2000 cf_off 500000
>>> lasi probe returned 0
>>> probing for asp*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> asp probe returned 0
>>> probing for wax*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for mongoose*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> mongoose probe returned 0
>>> probing for sti0
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa fffa2000 off ffa2000 cf_off ffffffff
>>> siop probe returned 0
>>> cpu probe won
cpu0 at mainbus0 offset ffa2000 irq 31: PCXT' L1-B 100MHz, FPU PCXT' (Tornado) rev 1
cpu0: 256K(32b/l) Icache, 258K(32b/l) wr-back Dcache, 120 coherent TLB, 16 BTLB
>> HPA 0xfffa1000[0x0]
>> iodc_data error -4
>> HPA 0xfffa0000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/-1 mod 20 hpa fffa0000 type 0 sv 4
>>> probing for lcd0
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> lcd probe returned 0
>>> probing for mem*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> mem probe returned 0
>>> probing for cpu*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> cpu probe returned 0
>>> probing for phantomas0
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> phantomas probe returned 0
>>> probing for uturn0
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for uturn1
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> uturn probe returned 0
>>> probing for astro*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> astro probe returned 0
>>> probing for lasi0
>> hpa fffa0000 off ffa0000 cf_off 100000
>>> lasi probe returned 0
>>> probing for lasi0
>> hpa fffa0000 off ffa0000 cf_off fd00000
>>> lasi probe returned 0
>>> probing for lasi1
>> hpa fffa0000 off ffa0000 cf_off 500000
>>> lasi probe returned 0
>>> probing for asp*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> asp probe returned 0
>>> probing for wax*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for mongoose*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> mongoose probe returned 0
>>> probing for sti0
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa fffa0000 off ffa0000 cf_off ffffffff
>>> siop probe returned 0
>>> no winning probe
"PA-RISC" at mainbus0 (type 0 sv 4 mod 58 hv b0) offset ffa0000 not configured
>> HPA 0xfff9f000[0x0]
>> iodc_data error -4
>> HPA 0xfff9e000[0x0]
>> iodc_data error -4
>> HPA 0xfff9d000[0x0]
>> iodc_data error -4
>> HPA 0xfff9c000[0x0]
>> iodc_data error -4
>> HPA 0xfff9b000[0x0]
>> iodc_data error -4
>> HPA 0xfff9a000[0x0]
>> iodc_data error -4
>> HPA 0xfff99000[0x0]
>> iodc_data error -4
>> HPA 0xfff98000[0x0]
>> iodc_data error -4
>> HPA 0xfff97000[0x0]
>> iodc_data error -4
>> HPA 0xfff96000[0x0]
>> iodc_data error -4
>> HPA 0xfff95000[0x0]
>> iodc_data error -4
>> HPA 0xfff94000[0x0]
>> iodc_data error -4
>> HPA 0xfff93000[0x0]
>> iodc_data error -4
>> HPA 0xfff92000[0x0]
>> iodc_data error -4
>> HPA 0xfff91000[0x0]
>> iodc_data error -4
>> HPA 0xfff90000[0x0]
>> iodc_data error -4
>> HPA 0xfff8f000[0x0]
>> iodc_data error -4
>> HPA 0xfff8e000[0x0]
>> iodc_data error -4
>> HPA 0xfff8d000[0x0]
>> iodc_data error -4
>> HPA 0xfff8c000[0x0]
>> iodc_data error -4
>> HPA 0xfff8b000[0x0]
>> iodc_data error -4
>> HPA 0xfff8a000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/-1 mod a hpa fff8a000 type c sv b
>>> probing for lcd0
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> lcd probe returned 0
>>> probing for mem*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> mem probe returned 0
>>> probing for cpu*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> cpu probe returned 0
>>> probing for phantomas0
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> phantomas probe returned 0
>>> probing for uturn0
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> uturn probe returned 1
>>> probing for uturn1
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> uturn probe returned 1
>>> probing for astro*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> astro probe returned 0
>>> probing for lasi0
>> hpa fff8a000 off ff8a000 cf_off 100000
>>> lasi probe returned 0
>>> probing for lasi0
>> hpa fff8a000 off ff8a000 cf_off fd00000
>>> lasi probe returned 0
>>> probing for lasi1
>> hpa fff8a000 off ff8a000 cf_off 500000
>>> lasi probe returned 0
>>> probing for asp*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> asp probe returned 0
>>> probing for wax*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for mongoose*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> mongoose probe returned 0
>>> probing for sti0
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa fff8a000 off ff8a000 cf_off ffffffff
>>> siop probe returned 0
>>> uturn probe won
uturn0 at mainbus0 offset ff8a000: U2 rev 7
>> ADDRS: 0xffd0c000[0x1000] 0xffc00000[0x380000]
>> HPA 0xffd00000[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/-1/10 mod c hpa ffd00000 type b sv 81
>>> probing for lasi0
>> hpa ffd00000 off fd00000 cf_off fd00000
>>> lasi probe returned 1
>>> probing for wax*
>> hpa ffd00000 off fd00000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for dino0
>> hpa ffd00000 off fd00000 cf_off ffffffff
>>> dino probe returned 0
>>> probing for sti0
>> hpa ffd00000 off fd00000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa ffd00000 off fd00000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa ffd00000 off fd00000 cf_off ffffffff
>>> siop probe returned 0
>>> lasi probe won
lasi0 at uturn0 offset fd00000 irq 28: rev 3.0
>>> probing for gsc0
>>> gsc probe returned 1
>>> gsc probe won
gsc0 at lasi0: wordleds
>> HPA 0xffd08100[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/10/12 mod 8 hpa ffd08100 type a sv 84
>>> probing for com1
>> hpa ffd08100 off 8100 cf_off 822000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd08100 off 8100 cf_off 5000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd08100 off 8100 cf_off 823000
>>> com probe returned 0
>>> probing for lpt0
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> lpt probe returned 0
>>> probing for com2
>> hpa ffd08100 off 8100 cf_off 0
>>> com probe returned 0
>>> probing for com2
>> hpa ffd08100 off 8100 cf_off 4040
>>> com probe returned 0
>>> probing for com3
>> hpa ffd08100 off 8100 cf_off 4060
>>> com probe returned 0
>>> probing for ie0
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> ie probe returned 0
>>> probing for osiop*
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> osiop probe returned 0
>>> probing for oosiop*
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> oosiop probe returned 0
>>> probing for hil*
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> hil probe returned 0
>>> probing for harmony*
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> harmony probe returned 0
>>> probing for gsckbc*
>> hpa ffd08100 off 8100 cf_off ffffffff
>>> gsckbc probe returned 1
>>> gsckbc probe won
gsckbc0 at gsc0 offset 8100 irq 26
>> HPA 0xffd08000[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/10/12 mod 7 hpa ffd08000 type a sv 84
>>> probing for com1
>> hpa ffd08000 off 8000 cf_off 822000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd08000 off 8000 cf_off 5000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd08000 off 8000 cf_off 823000
>>> com probe returned 0
>>> probing for lpt0
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> lpt probe returned 0
>>> probing for com2
>> hpa ffd08000 off 8000 cf_off 0
>>> com probe returned 0
>>> probing for com2
>> hpa ffd08000 off 8000 cf_off 4040
>>> com probe returned 0
>>> probing for com3
>> hpa ffd08000 off 8000 cf_off 4060
>>> com probe returned 0
>>> probing for ie0
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> ie probe returned 0
>>> probing for osiop*
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> osiop probe returned 0
>>> probing for oosiop*
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> oosiop probe returned 0
>>> probing for hil*
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> hil probe returned 0
>>> probing for harmony*
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> harmony probe returned 0
>>> probing for gsckbc*
>> hpa ffd08000 off 8000 cf_off ffffffff
>>> gsckbc probe returned 1
>>> gsckbc probe won
gsckbc1 at gsc0 offset 8000 irq 26
>> ADDRS: 0xffd01000[0x1000] 0xffd03000[0x1000]
>> HPA 0xffd02000[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/10/12 mod 0 hpa ffd02000 type a sv 74
>>> probing for com1
>> hpa ffd02000 off 2000 cf_off 822000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd02000 off 2000 cf_off 5000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd02000 off 2000 cf_off 823000
>>> com probe returned 0
>>> probing for lpt0
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> lpt probe returned 1
>>> probing for com2
>> hpa ffd02000 off 2000 cf_off 0
>>> com probe returned 0
>>> probing for com2
>> hpa ffd02000 off 2000 cf_off 4040
>>> com probe returned 0
>>> probing for com3
>> hpa ffd02000 off 2000 cf_off 4060
>>> com probe returned 0
>>> probing for ie0
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> ie probe returned 0
>>> probing for osiop*
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> osiop probe returned 0
>>> probing for oosiop*
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> oosiop probe returned 0
>>> probing for hil*
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> hil probe returned 0
>>> probing for harmony*
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> harmony probe returned 0
>>> probing for gsckbc*
>> hpa ffd02000 off 2000 cf_off ffffffff
>>> gsckbc probe returned 0
>>> lpt probe won
lpt0 at gsc0 offset 2000 irq 7
>> HPA 0xffd07000[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/10/12 mod 6 hpa ffd07000 type a sv 8a
>>> probing for com1
>> hpa ffd07000 off 7000 cf_off 822000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd07000 off 7000 cf_off 5000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd07000 off 7000 cf_off 823000
>>> com probe returned 0
>>> probing for com2
>> hpa ffd07000 off 7000 cf_off 0
>>> com probe returned 0
>>> probing for com2
>> hpa ffd07000 off 7000 cf_off 4040
>>> com probe returned 0
>>> probing for com3
>> hpa ffd07000 off 7000 cf_off 4060
>>> com probe returned 0
>>> probing for ie0
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> ie probe returned 1
>>> probing for osiop*
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> osiop probe returned 0
>>> probing for oosiop*
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> oosiop probe returned 0
>>> probing for hil*
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> hil probe returned 0
>>> probing for harmony*
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> harmony probe returned 0
>>> probing for gsckbc*
>> hpa ffd07000 off 7000 cf_off ffffffff
>>> gsckbc probe returned 0
>>> ie probe won
ie0 at gsc0 offset 7000 irq 8: LASI/i82596CA v1.0, address 08:00:09:f0:3a:a2
>> HPA 0xffd06000[0x1000]
>> probing: flags 0 bc -1/-1/-1/-1/10/12 mod 5 hpa ffd06000 type a sv 82
>>> probing for com1
>> hpa ffd06000 off 6000 cf_off 822000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd06000 off 6000 cf_off 5000
>>> com probe returned 0
>>> probing for com0
>> hpa ffd06000 off 6000 cf_off 823000
>>> com probe returned 0
>>> probing for com2
>> hpa ffd06000 off 6000 cf_off 0
>>> com probe returned 0
>>> probing for com2
>> hpa ffd06000 off 6000 cf_off 4040
>>> com probe returned 0
>>> probing for com3
>> hpa ffd06000 off 6000 cf_off 4060
>>> com probe returned 0
>>> probing for osiop*
>> hpa ffd06000 off 6000 cf_off ffffffff
>>> osiop probe returned 1
>>> probing for oosiop*
>> hpa ffd06000 off 6000 cf_off ffffffff
>>> oosiop probe returned 0
>>> probing for hil*
>> hpa ffd06000 off 6000 cf_off ffffffff
>>> hil probe returned 0
>>> probing for harmony*
>> hpa ffd06000 off 6000 cf_off ffffffff
>>> harmony probe returned 0
>>> probing for gsckbc*
>> hpa ffd06000 off 6000 cf_off ffffffff
>>> gsckbc probe returned 0
>>> osiop probe won
osiop0 at gsc0 offset 6000 irq 9: NCR53C710 rev 2, 40MHz, SCSI ID 7
>>> probing for scsibus*
>>> scsibus probe returned 1
>>> scsibus probe won
scsibus0 at osiop0: 8 targets
osiop0: target 0 now using 8 bit 10 MHz 8 REQ/ACK offset xfers
>>> probing for cd*
>>> cd probe returned 0
>>> probing for ch*
>>> ch probe returned 0
>>> probing for sd*
>>> sd probe returned 0
>>> probing for st*
>>> st probe returned 2
>>> probing for ss*
>>> ss probe returned 0
>>> probing for uk*
>>> uk probe returned 1
>>> probing for safte*
>>> safte probe returned 0
>>> probing for ses*
>>> ses probe returned 0
>>> st probe won
st0 at scsibus0 targ 0 lun 0: <HP, C1533A, AN04> SCSI2 1/sequential removable
osiop0: target 2 now using 8 bit 4 MHz 8 REQ/ACK offset xfers
>>> probing for cd*
>>> cd probe returned 2
>>> probing for ch*
>>> ch probe returned 0
>>> probing for sd*
>>> sd probe returned 0
>>> probing for st*
>>> st probe returned 0
>>> probing for ss*
>>> ss probe returned 0
>>> probing for uk*
>>> uk probe returned 1
>>> probing for safte*
>>> safte probe returned 0
>>> probing for ses*
>>> ses probe returned 0
>>> cd probe won
cd0 at scsibus0 targ 2 lun 0: <TOSHIBA, CD-ROM XM-5401TA, 3115> SCSI2 5/cdrom removable
hpa f1800000
>> HPA 0xf183f000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/10 mod 3f hpa f183f000 type 7 sv c
>>> probing for wax*
>> hpa f183f000 off 183f000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for dino0
>> hpa f183f000 off 183f000 cf_off ffffffff
>>> dino probe returned 0
>>> probing for sti0
>> hpa f183f000 off 183f000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa f183f000 off 183f000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa f183f000 off 183f000 cf_off ffffffff
>>> siop probe returned 0
>>> no winning probe
"Bus Converter Port" at uturn0 (type 7 sv c mod 50 hv 11) offset 183f000 not configured
>> HPA 0xf183e000[0x0]
>> iodc_data error -4
>> HPA 0xf183d000[0x0]
>> iodc_data error -4
>> HPA 0xf183c000[0x0]
>> iodc_data error -4
>> HPA 0xf183b000[0x0]
>> iodc_data error -4
>> HPA 0xf183a000[0x0]
>> iodc_data error -4
>> HPA 0xf1839000[0x0]
>> iodc_data error -4
>> HPA 0xf1838000[0x0]
>> iodc_data error -4
>> HPA 0xf1837000[0x0]
>> iodc_data error -4
>> HPA 0xf1836000[0x0]
>> iodc_data error -4
>> HPA 0xf1835000[0x0]
>> iodc_data error -4
>> HPA 0xf1834000[0x0]
>> iodc_data error -4
>> HPA 0xf1833000[0x0]
>> iodc_data error -4
>> HPA 0xf1832000[0x0]
>> iodc_data error -4
>> HPA 0xf1831000[0x0]
>> iodc_data error -4
>> HPA 0xf1830000[0x0]
>> iodc_data error -4
>> HPA 0xf182f000[0x0]
>> iodc_data error -4
>> HPA 0xf182e000[0x0]
>> iodc_data error -4
>> HPA 0xf182d000[0x0]
>> iodc_data error -4
>> HPA 0xf182c000[0x0]
>> iodc_data error -4
>> HPA 0xf182b000[0x0]
>> iodc_data error -4
>> HPA 0xf182a000[0x0]
>> iodc_data error -4
>> HPA 0xf1829000[0x0]
>> iodc_data error -4
>> HPA 0xf1828000[0x0]
>> iodc_data error -4
>> HPA 0xf1827000[0x0]
>> iodc_data error -4
>> HPA 0xf1826000[0x0]
>> iodc_data error -4
>> HPA 0xf1825000[0x0]
>> iodc_data error -4
>> HPA 0xf1824000[0x0]
>> iodc_data error -4
>> HPA 0xf1823000[0x0]
>> iodc_data error -4
>> HPA 0xf1822000[0x0]
>> iodc_data error -4
>> HPA 0xf1821000[0x0]
>> iodc_data error -4
>> HPA 0xf1820000[0x0]
>> iodc_data error -4
>> HPA 0xf181f000[0x0]
>> iodc_data error -4
>> HPA 0xf181e000[0x0]
>> iodc_data error -4
>> HPA 0xf181d000[0x0]
>> iodc_data error -4
>> HPA 0xf181c000[0x0]
>> iodc_data error -4
>> HPA 0xf181b000[0x0]
>> iodc_data error -4
>> HPA 0xf181a000[0x0]
>> iodc_data error -4
>> HPA 0xf1819000[0x0]
>> iodc_data error -4
>> HPA 0xf1818000[0x0]
>> iodc_data error -4
>> HPA 0xf1817000[0x0]
>> iodc_data error -4
>> HPA 0xf1816000[0x0]
>> iodc_data error -4
>> HPA 0xf1815000[0x0]
>> iodc_data error -4
>> HPA 0xf1814000[0x0]
>> iodc_data error -4
>> HPA 0xf1813000[0x0]
>> iodc_data error -4
>> HPA 0xf1812000[0x0]
>> iodc_data error -4
>> HPA 0xf1811000[0x0]
>> iodc_data error -4
>> HPA 0xf1810000[0x0]
>> iodc_data error -4
>> HPA 0xf180f000[0x0]
>> iodc_data error -4
>> HPA 0xf180e000[0x0]
>> iodc_data error -4
>> HPA 0xf180d000[0x0]
>> iodc_data error -4
>> HPA 0xf180c000[0x0]
>> iodc_data error -4
>> HPA 0xf180b000[0x0]
>> iodc_data error -4
>> HPA 0xf180a000[0x0]
>> iodc_data error -4
>> HPA 0xf1809000[0x0]
>> iodc_data error -4
>> HPA 0xf1808000[0x0]
>> iodc_data error -4
>> HPA 0xf1807000[0x0]
>> iodc_data error -4
>> HPA 0xf1806000[0x0]
>> iodc_data error -4
>> HPA 0xf1805000[0x0]
>> iodc_data error -4
>> HPA 0xf1804000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/10 mod 4 hpa f1804000 type 7 sv c
>>> probing for wax*
>> hpa f1804000 off 1804000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for dino0
>> hpa f1804000 off 1804000 cf_off ffffffff
>>> dino probe returned 0
>>> probing for sti0
>> hpa f1804000 off 1804000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa f1804000 off 1804000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa f1804000 off 1804000 cf_off ffffffff
>>> siop probe returned 0
>>> no winning probe
"Bus Converter Port" at uturn0 (type 7 sv c mod 50 hv 0) offset 1804000 not configured
>> HPA 0xf1803000[0x0]
>> iodc_data error -4
>> HPA 0xf1802000[0x0]
>> iodc_data error -4
>> HPA 0xf1801000[0x0]
>> iodc_data error -4
>> HPA 0xf1800000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/10 mod 0 hpa f1800000 type 4 sv 89
>>> probing for wax*
>> hpa f1800000 off 1800000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for dino0
>> hpa f1800000 off 1800000 cf_off ffffffff
>>> dino probe returned 0
>>> probing for sti0
>> hpa f1800000 off 1800000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa f1800000 off 1800000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa f1800000 off 1800000 cf_off ffffffff
>>> siop probe returned 1
>>> siop probe won
siop0 at uturn0 offset 1800000 irq 3: NCR53C720 rev 4
>>> probing for scsibus*
>>> scsibus probe returned 1
>>> scsibus probe won
scsibus1 at siop0: 16 targets
>>> probing for cd*
>>> cd probe returned 0
>>> probing for ch*
>>> ch probe returned 0
>>> probing for sd*
>>> sd probe returned 2
>>> probing for st*
>>> st probe returned 0
>>> probing for ss*
>>> ss probe returned 0
>>> probing for uk*
>>> uk probe returned 1
>>> probing for safte*
>>> safte probe returned 0
>>> probing for ses*
>>> ses probe returned 0
>>> sd probe won
sd0 at scsibus1 targ 3 lun 0: <SEAGATE, ST15150W, HP07> SCSI2 0/direct fixed
sd0: drive offline
>>> probing for cd*
>>> cd probe returned 0
>>> probing for ch*
>>> ch probe returned 0
>>> probing for sd*
>>> sd probe returned 2
>>> probing for st*
>>> st probe returned 0
>>> probing for ss*
>>> ss probe returned 0
>>> probing for uk*
>>> uk probe returned 1
>>> probing for safte*
>>> safte probe returned 0
>>> probing for ses*
>>> ses probe returned 0
>>> sd probe won
sd1 at scsibus1 targ 4 lun 0: <SEAGATE, ST15150W, HP07> SCSI2 0/direct fixed
sd1: drive offline
siop0: target 5 now using 8 bit async xfers
siop0: target 5 now using 8 bit 10.0 MHz 8 REQ/ACK offset xfers
>>> probing for cd*
>>> cd probe returned 0
>>> probing for ch*
>>> ch probe returned 0
>>> probing for sd*
>>> sd probe returned 2
>>> probing for st*
>>> st probe returned 0
>>> probing for ss*
>>> ss probe returned 0
>>> probing for uk*
>>> uk probe returned 1
>>> probing for safte*
>>> safte probe returned 0
>>> probing for ses*
>>> ses probe returned 0
>>> sd probe won
sd2 at scsibus1 targ 5 lun 0: <SEAGATE, ST15150W, HP12> SCSI2 0/direct fixed
sd2: 4095MB, 3712 cyl, 21 head, 107 sec, 512 bytes/sec, 8388314 sec total
siop0: target 6 now using 8 bit async xfers
siop0: target 6 now using 8 bit 10.0 MHz 8 REQ/ACK offset xfers
>>> probing for cd*
>>> cd probe returned 0
>>> probing for ch*
>>> ch probe returned 0
>>> probing for sd*
>>> sd probe returned 2
>>> probing for st*
>>> st probe returned 0
>>> probing for ss*
>>> ss probe returned 0
>>> probing for uk*
>>> uk probe returned 1
>>> probing for safte*
>>> safte probe returned 0
>>> probing for ses*
>>> ses probe returned 0
>>> sd probe won
sd3 at scsibus1 targ 6 lun 0: <SEAGATE, ST15150W, HP07> SCSI2 0/direct fixed
sd3: 4095MB, 3712 cyl, 21 head, 107 sec, 512 bytes/sec, 8388314 sec total
>> HPA 0xfff89000[0x0]
>> iodc_data error -4
>> HPA 0xfff88000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/-1 mod 8 hpa fff88000 type c sv b
>>> probing for lcd0
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> lcd probe returned 0
>>> probing for mem*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> mem probe returned 0
>>> probing for cpu*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> cpu probe returned 0
>>> probing for phantomas0
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> phantomas probe returned 0
>>> probing for uturn1
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> uturn probe returned 1
>>> probing for astro*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> astro probe returned 0
>>> probing for lasi1
>> hpa fff88000 off ff88000 cf_off 500000
>>> lasi probe returned 0
>>> probing for asp*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> asp probe returned 0
>>> probing for wax*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for mongoose*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> mongoose probe returned 0
>>> probing for sti0
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa fff88000 off ff88000 cf_off ffffffff
>>> siop probe returned 0
>>> uturn probe won
uturn1 at mainbus0 offset ff88000: U2 rev 7
hpa f1000000
>> HPA 0xf103f000[0x0]
>> probing: flags 0 bc -1/-1/-1/-1/-1/8 mod 3f hpa f103f000 type 7 sv c
>>> probing for wax*
>> hpa f103f000 off 103f000 cf_off ffffffff
>>> wax probe returned 0
>>> probing for dino1
>> hpa f103f000 off 103f000 cf_off ffffffff
>>> dino probe returned 0
>>> probing for sti0
>> hpa f103f000 off 103f000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for sti1
>> hpa f103f000 off 103f000 cf_off ffffffff
>>> sti probe returned 0
>>> probing for siop*
>> hpa f103f000 off 103f000 cf_off ffffffff
>>> siop probe returned 0
>>> no winning probe
"Bus Converter Port" at uturn1 (type 7 sv c mod 50 hv 11) offset 103f000 not configured
>> HPA 0xf103e000[0x0]
>> iodc_data error -4
>> HPA 0xf103d000[0x0]
>> iodc_data error -4
>> HPA 0xf103c000[0x0]
>> iodc_data error -4
>> HPA 0xf103b000[0x0]
>> iodc_data error -4
>> HPA 0xf103a000[0x0]
>> iodc_data error -4
>> HPA 0xf1039000[0x0]
>> iodc_data error -4
>> HPA 0xf1038000[0x0]
>> iodc_data error -4
>> HPA 0xf1037000[0x0]
>> iodc_data error -4
>> HPA 0xf1036000[0x0]
>> iodc_data error -4
>> HPA 0xf1035000[0x0]
>> iodc_data error -4
>> HPA 0xf1034000[0x0]
>> iodc_data error -4
>> HPA 0xf1033000[0x0]
>> iodc_data error -4
>> HPA 0xf1032000[0x0]
>> iodc_data error -4
>> HPA 0xf1031000[0x0]
>> iodc_data error -4
>> HPA 0xf1030000[0x0]
>> iodc_data error -4
>> HPA 0xf102f000[0x0]
>> iodc_data error -4
>> HPA 0xf102e000[0x0]
>> iodc_data error -4
>> HPA 0xf102d000[0x0]
>> iodc_data error -4
>> HPA 0xf102c000[0x0]
>> iodc_data error -4
>> HPA 0xf102b000[0x0]
>> iodc_data error -4
>> HPA 0xf102a000[0x0]
>> iodc_data error -4
>> HPA 0xf1029000[0x0]
>> iodc_data error -4
>> HPA 0xf1028000[0x0]
>> iodc_data error -4
>> HPA 0xf1027000[0x0]
>> iodc_data error -4
>> HPA 0xf1026000[0x0]
>> iodc_data error -4
>> HPA 0xf1025000[0x0]
>> iodc_data error -4
>> HPA 0xf1024000[0x0]
>> iodc_data error -4
>> HPA 0xf1023000[0x0]
>> iodc_data error -4
>> HPA 0xf1022000[0x0]
>> iodc_data error -4
>> HPA 0xf1021000[0x0]
>> iodc_data error -4
>> HPA 0xf1020000[0x0]
>> iodc_data error -4
>> HPA 0xf101f000[0x0]
>> iodc_data error -4
>> HPA 0xf101e000[0x0]
>> iodc_data error -4
>> HPA 0xf101d000[0x0]
>> iodc_data error -4
>> HPA 0xf101c000[0x0]
>> iodc_data error -4
>> HPA 0xf101b000[0x0]
>> iodc_data error -4
>> HPA 0xf101a000[0x0]
>> iodc_data error -4
>> HPA 0xf1019000[0x0]
>> iodc_data error -4
>> HPA 0xf1018000[0x0]
>> iodc_data error -4
>> HPA 0xf1017000[0x0]
>> iodc_data error -4
>> HPA 0xf1016000[0x0]
>> iodc_data error -4
>> HPA 0xf1015000[0x0]
>> iodc_data error -4
>> HPA 0xf1014000[0x0]
>> iodc_data error -4
>> HPA 0xf1013000[0x0]
>> iodc_data error -4
>> HPA 0xf1012000[0x0]
>> iodc_data error -4
>> HPA 0xf1011000[0x0]
>> iodc_data error -4
>> HPA 0xf1010000[0x0]
>> iodc_data error -4
>> HPA 0xf100f000[0x0]
>> iodc_data error -4
>> HPA 0xf100e000[0x0]
>> iodc_data error -4
>> HPA 0xf100d000[0x0]
>> iodc_data error -4
>> HPA 0xf100c000[0x0]
>> iodc_data error -4
>> HPA 0xf100b000[0x0]
>> iodc_data error -4
>> HPA 0xf100a000[0x0]
>> iodc_data error -4
>> HPA 0xf1009000[0x0]
>> iodc_data error -4
>> HPA 0xf1008000[0x0]
>> iodc_data error -4
>> HPA 0xf1007000[0x0]
>> iodc_data error -4
>> HPA 0xf1006000[0x0]
>> iodc_data error -4
>> HPA 0xf1005000[0x0]
>> iodc_data error -4
>> HPA 0xf1004000[0x0]
>> iodc_data error -4
>> HPA 0xf1003000[0x0]
>> iodc_data error -4
>> HPA 0xf1002000[0x0]
>> iodc_data error -4
>> HPA 0xf1001000[0x0]
>> iodc_data error -4
>> HPA 0xf1000000[0x0]
>> iodc_data error -4
>> HPA 0xfff87000[0x0]
>> iodc_data error -4
>> HPA 0xfff86000[0x0]
>> iodc_data error -4
>> HPA 0xfff85000[0x0]
>> iodc_data error -4
>> HPA 0xfff84000[0x0]
>> iodc_data error -4
>> HPA 0xfff83000[0x0]
>> iodc_data error -4
>> HPA 0xfff82000[0x0]
>> iodc_data error -4
>> HPA 0xfff81000[0x0]
>> iodc_data error -4
>> HPA 0xfff80000[0x0]
>> iodc_data error -4
biomask 0xb netmask 0xf ttymask 0x3f
bootpath: 10/12/6.10000.c70d0040.f45e1a89.32e7fe03.c0a8450b.c0a84558 class=4098 flags=0 hpa=0xffd07000 spa=0x0 io=0xc000
>>> probing for softraid0
>>> softraid probe returned 1
softraid0 at root
siop0: target 3 now using tagged 16 bit 10.0 MHz 8 REQ/ACK offset xfers
sd0(siop0:3:0): timeout on SCSI command 0x0
siop0: scsi bus reset
sd0(siop0:3:0): cmd 0xc08ea568 (tag 1) added to reset list
sd0(siop0:3:0): cmd 0xc08ea5a4 (tag 2) added to reset list
siop0: target 3 now using tagged 8 bit async xfers
siop0: target 5 now using 8 bit async xfers
siop0: target 6 now using 8 bit async xfers
sd0(siop0:3:0): cmd 0xc08ea568 (status 2) reset with status 6, xs->error 8
sd0(siop0:3:0): cmd 0xc08ea5a4 (status 2) reset with status 6, xs->error 4
siop0: target 3 now using tagged 16 bit 10.0 MHz 8 REQ/ACK offset xfers
sd0(siop0:3:0): timeout on SCSI command 0x0
siop0: scsi bus reset
sd0(siop0:3:0): cmd 0xc08e603c (tag 1) added to reset list
sd0(siop0:3:0): cmd 0xc08e6078 (tag 2) added to reset list
siop0: target 3 now using tagged 8 bit async xfers
siop0: target 5 now using 8 bit async xfers
siop0: target 6 now using 8 bit async xfers
sd0(siop0:3:0): cmd 0xc08e603c (status 2) reset with status 6, xs->error 8
sd0(siop0:3:0): cmd 0xc08e6078 (status 2) reset with status 6, xs->error 4
siop0: target 3 now using tagged 16 bit 10.0 MHz 8 REQ/ACK offset xfers
siop0: target 4 now using tagged 16 bit 10.0 MHz 8 REQ/ACK offset xfers
sd1(siop0:4:0): timeout on SCSI command 0x0
siop0: scsi bus reset
siop0: target 3 now using tagged 8 bit async xfers
sd1(siop0:4:0): cmd 0xc08e61e0 (tag 1) added to reset list
sd1(siop0:4:0): cmd 0xc08e621c (tag 2) added to reset list
siop0: target 4 now using tagged 8 bit async xfers
siop0: target 5 now using 8 bit async xfers
siop0: target 6 now using 8 bit async xfers
sd1(siop0:4:0): cmd 0xc08e61e0 (status 2) reset with status 6, xs->error 8
sd1(siop0:4:0): cmd 0xc08e621c (status 2) reset with status 6, xs->error 4
siop0: target 4 now using tagged 16 bit 10.0 MHz 8 REQ/ACK offset xfers
sd1(siop0:4:0): timeout on SCSI command 0x0
siop0: scsi bus reset
siop0: target 3 now using tagged 8 bit async xfers
sd1(siop0:4:0): cmd 0xc08ea000 (tag 1) added to reset list
sd1(siop0:4:0): cmd 0xc08ea03c (tag 2) added to reset list
siop0: target 4 now using tagged 8 bit async xfers
siop0: target 5 now using 8 bit async xfers
siop0: target 6 now using 8 bit async xfers
sd1(siop0:4:0): cmd 0xc08ea000 (status 2) reset with status 6, xs->error 8
sd1(siop0:4:0): cmd 0xc08ea03c (status 2) reset with status 6, xs->error 4
siop0: target 4 now using tagged 16 bit 10.0 MHz 8 REQ/ACK offset xfers
siop0: target 5 now using tagged 16 bit 10.0 MHz 8 REQ/ACK offset xfers
siop0: target 6 now using tagged 16 bit 10.0 MHz 8 REQ/ACK offset xfers
nfs_boot: using interface ie0, with revarp & bootparams
panic: revarp failed, error=51
Stopped at Debugger+0x18: break 0,5
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
Debugger(417d78,4aee14,0,3a8) at Debugger+0x18
panic(42daf8,33,61f703a9,0) at panic+0x104
panic(4bb000,c0906800,4ac90c,0) at panic+0xdc
nfs_boot_init(0,4d,fd,506000) at nfs_boot_init+0x2e8
nfs_mountroot(413a44,413984,0,506000) at nfs_mountroot+0x84
vfs_mountroot(6d1c5bdc,36b57747,9b5abba3,cdad5dd1) at vfs_mountroot+0x2c
main(0,0,0,0) at main+0x7b8
-- trap #0
$start+0x154:
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
4 0 0 0 3 0x100200 pftm pfpurge
3 0 0 0 3 0x100200 bored syswq
2 0 0 0 3 0x100200 idle0
1 0 0 0 3 0 initexec swapper
* 0 -1 0 0 7 0x80200 swapper
ddb> ~[scanner].Connected.
Connected.
Disconnected.