Re: problem booting lif33.fs

On Wed, 18 Jun 2003, Michael Shalayeff wrote:

> broken indeed.
> anyway you are supposed to use the snapshot anyway...

ok, good answer for the next question I guess ;-)

being with openbsd and openbsd/hppa for about 4 hours and not finding
to much on marc here is the next question:

I usually used serial console and ssh with my apollo (and l****).
Never had a screen attached.

I used cd3.3.iso and and external backup tower including my DLT and
a CD-ROM to boot and install.

while installing from ftp (mirror the files home - no fun with dialup)
I got following - and a lot of them:

--- cut ---
ie0: receive descriptors out of sync at 54
ie0: receive descriptors out of sync at 42
ie0: receive descriptors out of sync at 66
--- cut ---

have installed 3.3R now and booting up I get following:

--- cut ---
sti0 at mainbus0 offset 8000000 irq 11: HPA208LC1280 rev 8.04;7
sti0: 2048x1024 frame buffer, 1280x1024x8 display, offset 0x0
sti0: 8x16 font type 1, 16 bpc, charset 0-255
"SGC Graphics" at mainbus0 (type a, sv 77) offset 4000000 not configured
biomask 0x7 netmask 0xf ttymask 0x3f
panic: trap: uvm_fault(0x41ae90, f00e0000, 0, 2): 14
Stopped at      Debugger+0x18:  break   0,5
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> ps
   PID   PPID   PGRP    UID  S       FLAGS  WAIT       COMMAND
*    0     -1      0      0  2     0x80204             swapper
ddb> trace
Debugger(26a8c0,f0105800,5,474000) at Debugger+0x18
panic(2a43b0,41ae90,f00e0000,0) at panic+0xf4
panic(0,0,0,0) at panic+0xd8
trap(0,0,4b64c8,ed260002) at trap+0x7b0
-- trap #15
ie_gsc_intrhook(29e00c,fff80000,4b6308,0) at ie_gsc_intrhook+0x104
i82596_intr(0,0,0,0) at i82596_intr+0x11c
i82596_intr(0,ffffffff,ffffff,412cf0) at i82596_intr+0x11c
cpu_intr(336600,0,400ac8,c01b7fc0) at cpu_intr+0x114
trap(0,0,50,40) at trap+0x7e4
-- trap #4
cpu_configure(266edc,f0105800,5,474000) at cpu_configure+0x88
cpu_configure(0,0,0,0) at cpu_configure+0x7c
main(0,0,0,0) at main+0x46c
-- trap #0
$callmain+0x8:
--- cut ---

Is this fixed in snapshot ?

Is there some rough Changelog of the differences from 3.3 to snapshot
apart from cvs diff's and commit messages ?


Thanks in advance.

-- 
Bjoern A. Zeeb				bzeeb at Zabbadoz dot NeT
56 69 73 69 74				http://www.zabbadoz.net/