Re: error with ndp command for ND proxy

Hello,

I make new test:
In fact, when I try ndp on my FW, I have error:
ndp: writing to routing socket: Network is unreachable

My FW is a SUN server with OpenBSD 4.2 sparc64.

If I try the same architecture with a i386 FW,
all work :(
It is a bug on sparc64?

Thank's

On Fri, 4 Apr 2008 14:48:19 +0200, mailing BSD wrote
> Hello,
> 
> do you have some example for ND proxy configuration?
> 
> I want use this on my FW, but when I use ndp command, I have error:
> set: cannot configure a new entry
> 
> I don't understand.
> 
> My archi is:
> 
> Internet---router IPV6----FW OpenBSD4.2-------Linux station (startv6)
>                   IPv6-1  IPv6-2    IPv6-3    IPv6-4
> 
> I try:
> ndp -s <IPv6-4> <MAC of IPv6-2> proxy
> result: 
> set: cannot configure a new entry
> 
> I have:
> net.inet6.ip6.forwarding=1
> net.inet6.ip6.accept_rtadv=0
> 
> when I do "ping www.kame.net" on "Linux station"
> "icmp6 echo request" go to "router IPV6", 
> but there is no reply for
> "icmp6: neighbor sol: who has <IPv6-4>"
> 
> It's normal, but how can I have reply? ndp is not the good command?
> 
> the tcpdump on interface of IPv6-2
> ---begin---
> 14:40:02.767141 startv6 > orange.kame.net: icmp6: echo request
> 
> 14:40:03.116245 fe80::207:cbff:fe0f:3764 > ff02::1:ff23:be89: icmp6: 
> neighbor sol: who has startv6
> ---end---
> 
> very thank's for your help.
> 
> --
> Eric JANTZEN - http://cv.jantzen.fr
> Lyon
> FRANCE


--
Eric JANTZEN - http://cv.jantzen.fr
Lyon
FRANCE