Re: [OT] Q840AV dmesg output from linux

Thanks for the report.

On Mon, Apr 05, 2004 at 10:41:43PM +0200, Riccardo Mottola wrote:
> Hello,
> 
> I remember someone asking me for a dmesg output of my Q840.
> Here it is coming from linux 2.6.5 I just compiled today, I have no BSD
> on it. Although 2.6 kernel broke something with the keyboard, SCSI and
> onboard ethernet are fully functional, I could luckily telnet in since
> keyboard is getting random codes :)
> 
> Linux version 2.6.5 (multix@coccus) (gcc version 3.0.4) #3 Mon Apr 5
> 20:39:32 CEST 2004
> Detected Macintosh model: 78 
>  Penguin bootinfo data:
>  Video: addr 0x50100800 row 0x800 depth 10 dimensions 640 x 480
>  Videological 0xf0100800 phys. 0x50100800, SCC at 0x50f04000 
>  Boottime: 0x4071de54 GMTBias: 0x0 
>  Machine ID: 78 CPUid: 0x2 memory size: 0x80 
> VIA1 at 50f00000 is a 6522 or clone
> VIA2 at 50f02000 is <6>a 6522 or clone
> PSC detected at 50f31000
> Killing all PSC DMA channels...done!
> PSC #3:  IFR = 0x00 IER = 0x01
> PSC #4:  IFR = 0x81 IER = 0x0F
> PSC #5:  IFR = 0x00 IER = 0x03
> PSC #6:  IFR = 0x01 IER = 0x00
> Apple Macintosh Quadra 840AV
> On node 0 totalpages: 32768
>   DMA zone: 32768 pages, LIFO batch:8
>   Normal zone: 0 pages, LIFO batch:1
>   HighMem zone: 0 pages, LIFO batch:1
> Built 1 zonelists
> Kernel command line: root=/dev/sdc4
> Killing onboard sonic... Done.
> PID hash table entries: 16 (order 4: 128 bytes)
> Console: colour dummy device 80x25
> Memory: 127680k/131072k available (1296k kernel code, 1828k data, 80k
> init)
> Calibrating delay loop... 26.52 BogoMIPS
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> POSIX conformance testing by UNIFIX
> NET: Registered protocol family 16
> NuBus: Scanning NuBus slots.
> SCSI subsystem initialized
> macfb: framebuffer at 0x50100800, mapped to 0xd0000800, size 960k
> macfb: mode is 640x480x16, linelength=2048
> macfb: scrolling: redraw
> macfb: directcolor: size=1:5:5:5, shift=15:10:5:0
> fb0: Macintosh Civic built-in frame buffer device
> fbcon_startup: No VBL detected, using timer based cursor.
> mac_delete_irq: tried to remove invalid irq
> Console: switching to colour frame buffer device 80x30
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> eth0: 68K MACE, hardware address 08:00:07:C6:05:16
> Checking for internal Macintosh ethernet (SONIC).. none.
> mac_esp: io base at 0x50f18000
> esp: addr at 0x50f18000
> SCSI ID 7 Clk 25MHz CCF=5 TOut 167 NCR53C9x(esp236)
> 
> mac_esp: 1 esp controllers found
> scsi0 : ESP236 (NCR53C9x)
> Using deadline io scheduler
>   Vendor: MICROP    Model: 2217-15MQ1001901  Rev: HQ30
>   Type:   Direct-Access                      ANSI SCSI revision: 02
>   Vendor: QUANTUM   Model: FIREBALL1280S     Rev: 630C
>   Type:   Direct-Access                      ANSI SCSI revision: 02
>   Vendor: SONY      Model: CD-ROM CDU-8003A  Rev: 1.9a
>   Type:   CD-ROM                             ANSI SCSI revision: 02
> esp0: hoping for msgout
>   Vendor: IBM       Model: 0661371           Rev: H q 
>   Type:   Direct-Access                      ANSI SCSI revision: 02
>   Vendor: IOMEGA    Model: ZIP 100           Rev: C.18
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> SCSI device sda: 3450902 512-byte hdwr sectors (1767 MB)
> SCSI device sda: drive cache: write back
>  sda: [mac] sda1 sda2 sda3
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> SCSI device sdb: 2503872 512-byte hdwr sectors (1282 MB)
> SCSI device sdb: drive cache: write back
>  sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
> Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
> SCSI device sdc: 625356 512-byte hdwr sectors (320 MB)
> SCSI device sdc: drive cache: write through
>  sdc: [mac] sdc1 sdc2 sdc3 sdc4
> Attached scsi disk sdc at scsi0, channel 0, id 5, lun 0
> Attached scsi removable disk sdd at scsi0, channel 0, id 6, lun 0
> sr0: scsi-1 drive
> Uniform CD-ROM driver Revision: 3.20
> Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
> Macintosh CUDA driver v0.5 for Unified ADB.
> mice: PS/2 mouse device common for all mice
> NET: Registered protocol family 2
> adb: starting probe task...
> adb devices: [2]: 2 5 [3]: 3 1
> ADB keyboard at 2, handler set to 3
> Detected ADB keyboard, type ISO, swapping keys.
> input: ADB keyboard on adb2:2.05/input
> IP: routing cache hash table of 1024 buckets, 8Kbytes
> TCP: Hash tables configured (established 8192 bind 16384)
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> VFS: Mounted root (ext2 filesystem) readonly.
> ADB mouse at 3, handler set to 2
> input: ADB mouse on adb3:3.01/input
> adb: finished probe task...
> version 0 swap is no longer supported. Use mkswap -v1 /dev/sdc3
> version 0 swap is no longer supported. Use mkswap -v1 /dev/sdc3
> nfs warning: mount version older than kernel
> 
> -Ric