Re: supported systems list

At 1:24 PM -0800 27/03/2004, Hugo Villeneuve wrote:
>On Sat, Mar 27, 2004 at 02:53:43PM +0100, Xavier Santolaria wrote:
>> we are currently "cleaning"/syc'ing with reality the supported systems
>>list
...
>I put that document together recently (it's not complete). Mostly
>based on Apple Old Mac technical reference:
>http://eintr.net/openbsd/openbsd-supported-mac68k.txt

No mention there yet of the LC 575... Defunct? Ah, I see that
http://carduus.chanet.de/misc/obsd-68k-support-list.html contains a
reference to the 575 as fully-supported... Maybe the former page should
contain a pointer, or redirect, to the latter.

I have (finally, maybe) a full-040 LC575 mobo (hacked into a Colo(u)r
Classic case, modified to display 640x480) and it seems to be working - to
the extent that I've been able to make sense of the various telegraphic man
pages and install docs - with the revised 3.5 from
168.215.182.13/pub/OpenBSD/3.5/mac68k installed. Thank you, Frank.

On http://www.openbsd.org/mac68k.html, you read:

"Unsupported devices

* LCPDS ethernet cards.
* Apple Communication Slot (CS) ethernet cards.
..."

While I haven't tried the PDS card I have installed in the CClassic/LC575,
the other one, the Comm Slot card, does seem to work (manually ifconfig'd
because I can't make head or tail of the hostname\myname\mygate stuff); I'm
currently ssh'd in from this machine over my home lan. From the dmesg
below, it seems that the CS ethernet card is identified as 'built-in'. I
don't know why so, but suspect that there's some mis-identification working
in my favour.



OpenBSD 3.5-stable (GENERIC) #3: Sat Jul 17 07:02:50 CDT 2004
    [email protected]:/usr/src/sys/arch/mac68k/compile/GENERIC
Apple Macintosh LC 575, 68040 CPU+MMU+FPU, 4k on-chip physical I/D caches
real mem = 37748736 (36864K)
avail mem = 31105024 (30376K)
using 486 buffers containing 1990656 bytes (1944K) of memory
mrg: 'MacLC575 ROMs' ROM glue, tracing off, debug off, silent traps
mrg: I/O map kludge for ROMs that use hardware addresses directly.
adb: bus subsystem
mrg: skipping egret setup
adb: calling ADBReInit
adb: using Cuda series hardware support
adb: cleanup: nothing returned
adb: ADBReInit complete
adb: mapped device (8) at 2
adb: 100 dpi mouse at 3
mainbus0 (root)
obio0 at mainbus0
adb0 at obio0 (ADB event device)
asc0 at obio0: Apple Sound Chip
intvid0 at obio0: DAFB: Monitor sense 1.
intvid0: 640 x 480, monochrome
grf0 at intvid0
ite0 at grf0 (minimal console)
sn0 at obio0: integrated ethernet adapter, address 08:00:07:f7:c0:73
esp0 at obio0: address 0x898000: NCR53C96, 16MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST32151N, 0328> SCSI2 0/direct fixed
sd0: 2047MB, 4177 cyl, 8 head, 125 sec, 512 bytes/sec, 4193415 sec total
zsc0 at obio0 chip type 0
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
nubus0 at mainbus0
sn1 at nubus0: Apple Ethernet LC Twisted-Pair C, address 08:00:07:8f:1d:ab
root on sd0a swap on sd0b
PRAM time does not appear to have been read correctly.
PRAM: 0x83da4f80, macos_boottime: 0x411821a4.