Re: sound on a mac68k openbsd machine (crossing guard)

are you 100% sure about that do you use mac68k?

On Tue, 25 Feb 2003, Joel Rees wrote:

> Forwarding this to the mac68k so it can be continued there.
>
> > how do you get sound on a mac68k running openbsd it detects the asc0
> > device i have included  a dmesg from the machine
>
> My impression is that 68k mac sound is not well supported in the BSD
> community. The usual comment is "enough to get a beep". Did I miss
> something?
>
> > OpenBSD 3.2-stable (centris) #0: Sun Feb 16 10:20:53 EST 2003
> >     [email protected]:/usr/src/sys/arch/mac68k/compile/centris
> > Apple Macintosh Centris 610, 68040 CPU+MMU+FPU, 4k on-chip physical I/D
> > caches
> > real mem = 37748736 (36864K)
> > avail mem = 31285248 (30552K)
> > using 486 buffers containing 1990656 bytes (1944K) of memory
> > mrg: 'Quadra/Centris ROMs' ROM glue, tracing off, debug off, silent traps
> > mrg: I/O map kludge for ROMs that use hardware addresses directly.
> > adb: bus subsystem
> > mrg: skipping egret setup
> > adb: calling ADBReInit
> > adb: using II series hardware support
> > adb: cleanup: nothing returned
> > adb: ADBReInit complete
> > adb: extended keyboard at 2
> > adb: extended mouse <KM\M-C> 0-button 6032 dpi unknown device at 15
> > adb: relative positioning device (mouse?) (50) at 3
> > mainbus0 (root)
> > obio0 at mainbus0
> > adb0 at obio0 (ADB event device)
> > asc0 at obio0: Apple Sound Chip
> > intvid0 at obio0: DAFB: Monitor sense 1.
> > intvid0: 640 x 480, monochrome
> > grf0 at intvid0
> > ite0 at grf0 (minimal console)
> > sn0 at obio0: integrated ethernet adapter, address 08:00:07:6c:43:0f
> > esp0 at obio0: address 0x898000: NCR53C96, 16MHz, SCSI ID 7
> > scsibus0 at esp0: 8 targets
> > sd0 at scsibus0 targ 0 lun 0: <QUANTUM, LPS540S, 590W> SCSI2 0/direct
> > fixed
> > sd0: 516MB, 2740 cyl, 4 head, 96 sec, 512 bytes/sec, 1057616 sec total
> > cd0 at scsibus0 targ 3 lun 0: <SONY, CD-ROM CDU-8003, 1.7w> SCSI2 5/cdrom
> > removable
> > probe(esp0:3:1): Check Condition on opcode 0x12
> >     SENSE KEY: Illegal Request
> >      ASC/ASCQ: Logical Unit Not Supported
> > probe(esp0:3:2): Check Condition on opcode 0x12
> >     SENSE KEY: Illegal Request
> >      ASC/ASCQ: Logical Unit Not Supported
> > probe(esp0:3:3): Check Condition on opcode 0x12
> >     SENSE KEY: Illegal Request
> >      ASC/ASCQ: Logical Unit Not Supported
> > probe(esp0:3:4): Check Condition on opcode 0x12
> >     SENSE KEY: Illegal Request
> >      ASC/ASCQ: Logical Unit Not Supported
> > probe(esp0:3:5): Check Condition on opcode 0x12
> >     SENSE KEY: Illegal Request
> >      ASC/ASCQ: Logical Unit Not Supported
> > probe(esp0:3:6): Check Condition on opcode 0x12
> >     SENSE KEY: Illegal Request
> >      ASC/ASCQ: Logical Unit Not Supported
> > probe(esp0:3:7): Check Condition on opcode 0x12
> >     SENSE KEY: Illegal Request
> >      ASC/ASCQ: Logical Unit Not Supported
> > zsc0 at obio0 chip type 0
> > zstty0 at zsc0 channel 0
> > zstty1 at zsc0 channel 1
> > nubus0 at mainbus0
> > root on sd0a swap on sd0b
> > PRAM: 0x3e556d9e, macos_boottime: 0x3e556d94.
>
> --
> Joel Rees <[email protected]>