Re: Kernel Panic - but not on bsd.rd

Mike Marcott <[email protected]> Wed, 24 Jun 2026 06:21:08 -0500
Newsgroups gmane.os.openbsd.misc
Message-ID <[email protected]>
Here is the text version from the pictures.  Any ideas on how to 
proceed?  I can try 7.9 if neeeded.


 From 7.8 RELEASE panic..

boot> mach mem
Region 0: type 1 at 0x0 for 640KB
Region 1: type 1 at 0x100000 for 159868KB
Region 2: type 2 at 0x9d1f000 for 2948KB
Region 3: type 1 at 0xa000000 for 2048KB
Region 4: type 4 at 0xa200000 for 64KB
Region 5: type 1 at 0xa20e000 for 14280KB
Region 6: type 2 at 0xb000000 for 128KB
Region 7: type 1 at 0xb020000 for 3017052KB
Region 8: type 2 at 0xc3277000 for 4KB
Region 9: type 1 at 0xc3278000 for 111672KB
Region 10: type 2 at 0xc9f86000 for 4124KB
Region 11: type 3 at 0xca38d000 for 3628KB
Region 12: type 4 at 0xca718000 for 4004KB
Region 13: type 2 at 0xcab01000 for 15352KB
Region 14: type 1 at 0xcb9ff000 for 22532KB
Region 15: type 1 at 0x100000000 for 63687680KB
Region 16: type 2 at 0xa0000 for 384KB
Region 17: type 2 at 0xcd000000 for 49152KB
Region 18: type 2 at 0xf0000000 for 131072KB
Region 19: type 2 at 0xfd200000 for 1024KB
Region 20: type 2 at 0xfd600000 for 2048KB
Region 21: type 2 at 0xfea00000 for 64KB
Region 22: type 2 at 0xfeb80000 for 520KB
Region 23: type 2 at 0xfec10000 for 4KB
Region 24: type 2 at 0xfec30000 for 4KB
Region 25: type 2 at 0xfed00000 for 4KB
Region 26: type 2 at 0xfed40000 for 20KB
Region 27: type 2 at 0xfed80000 for 64KB
Region 28; type 2 at 0xfedc2000 for 56KB
Region 29: type 2 at 0xfedd4000 for 8KB
Region 30: tupe 2 at 0xff000000 for 16384KB
Region 31: type 2 at 0x102f300000 for 13312KB
Low ram: 640KB High ram: 3406848KB
Total free memory: 67015772KB


On 6/15/26 21:34, Mike Marcott wrote:
> 
> 
> On 6/15/26 11:08, Mike Larkin wrote:
>> On Mon, Jun 15, 2026 at 05:41:33AM -0500, Mike Marcott wrote:
>>> Mike - Mach mem output from 7.8 RELEASE attached. I’m at a loss on 
>>> how to
>>> pause to show the missing output. Also on how to get access to the 
>>> actual
>>> text instead of a picture - no serial port.  Hopefully this helps.
>>> Also 7.8 RELEASE installs, reboots, and runs fine the first few 
>>> times. Now
>>> it's doing the same thing.
>>>
>>> Link to mach mem from 7.8 RELEASE picture here.
>>> https://share.icloud.com/photos/08cjbhT4-GYx649ZygJAAXemg
>>>
>>>
>>> Also, here's a link to the 7.8 RELEASE version of the kernel panic
>>> https://share.icloud.com/photos/0a0Yh8ei3WYI9st_F3bti6FPg
>>>
>>> Let me know if these links don't work or you need something else.  Thank
>>> you!
>>>
>>
>> This looks truncated (starts at region 4).
>>
>> When this happens I usually take a slow-mo video on my phone and then 
>> replay.
>>
>> Can you provide the missing regions that way?
>>
>> Alternately, you may be able to increase the resolution by
>>
>> boot> machine gop
>>
>> -ml
> 
> Mike -
> Note this is for 7.8 RELEASE (https://share.icloud.com/ 
> photos/0a0Yh8ei3WYI9st_F3bti6FPg)
> 
> 
> Link to full version of machine mem starting with Region 0.
> https://share.icloud.com/photos/005ZRfcSp5HZXk7t5YgK4C1_Q
> 
> Thank you
> MM
> 
>>
>>>
>>>> On Jun 14, 2026, at 11:27 AM, Mike Larkin <[email protected]> wrote:
>>>>
>>>> On Sun, Jun 14, 2026 at 09:53:12AM -0500, Mike Marcott wrote:
>>>>> Hi,
>>>>>
>>>>> Installing 7.9 (current or release) on the following system completes
>>>>> successfully but on reboot it kernel panics immediately.  A typed out
>>>>> version of it is below (please excuse any typos, I tried...)
>>>>>
>>>>> Internal NVME disk is encrypted, after entering the passphrase the 
>>>>> system
>>>>> displays the boot> prompt as normal.  Entering nothing leads to kernel
>>>>> panic.  Entering bsd or bsd.sp will also lead to the panic, but 
>>>>> entering
>>>>> bsd.rd will boot to the ramdisk installer fine.  Dmesg below is 
>>>>> from the
>>>>> bsd.rd installer.
>>>>>
>>>>> I'm not able to type anything into the ddb{0}> prompt.  Keyboard 
>>>>> doesn't
>>>>> work.  Only can press power button to power off system.
>>>>>
>>>>> Note the system had 7.8 CURRENT on it and I did a sysupgrade which 
>>>>> lead to
>>>>> the issues noted.  Also note the 7.8 CURRENT was a fresh install 
>>>>> from around
>>>>> January and I hadn't yet starting configuring the machine instead 
>>>>> using my
>>>>> other desktop.  I have not tried a 7.8 install again.
>>>>>
>>>>> I'm wondering what I have to do to get this system to work?  Why 
>>>>> does the
>>>>> bsd.rd work while the installed bsd doesn't?
>>>>>
>>>>> System specs
>>>>> AMD Ryzen 9 5950X
>>>>> ASUS ROG STRIX B550-F GAMING WIFI II
>>>>> 64 GB RAM
>>>>> Graphics card installed is AMD FirePro W4300 (only card I have 
>>>>> lying around)
>>>>> Also have a iwx intel 210 wireless card as onboard wireless is not 
>>>>> supported
>>>>>
>>>>> dmesg here:
>>>>> https://dmesgd.nycbug.org/dmesgd?do=view&id=9007
>>>>>
>>>>> dmesg also below and attached.
>>>>>
>>>>> Thank you!
>>>>> Mike
>>>>>
>>>>
>>>> can you show the output of "mach mem" from the boot> prompt?
>>>>
>>>>> [ using 4947304 bytes of bsd ELF symbol table ]
>>>>> Copyright (c) 1982, 1986, 1989, 1991, 1993
>>>>> The Regents of the University of California. All rights reserved.
>>>>> Copyright (C) 1995-2826 OpenBSD. All rights reserved.
>>>>> https://www.OpenBSD.org
>>>>>
>>>>> panic: kernel diagnostic assertion "atop(VM_PAGE_TO_PHYS(&pg[i])) ==
>>>>> atop(VM_PAGE_TO_PHYS(pg)) + i" failed: file "/usr/
>>>>> src/sys/uvm/uvm_pmemrange.c", Line 1316
>>>>> Stopped at db_enter+0x14: popq    %rgp
>>>>>   TID    PID    UID    PRFLAGS     PFLAGS    CPU    COMMAND
>>>>> CPU COMMAND
>>>>> db_enter(10, ffffffff83135d40,282, 8, ffffffff8185af94, 
>>>>> ffffffff83135d40) at
>>>>> db_enter+0x14
>>>>> panic(ffffffff826a4d85, ffffffff826a4d85, fffff40100016000, eb35ce,
>>>>> ffffffff82ad6c77, ffffffff83135d50) at panic+0xd5
>>>>> __assert(ffffffff826e0978, ffffffff8265b0fe,524, ffffffff826c4145,
>>>>> ffffffff812efe69, ffffffff83135df0) at _assert+0x29
>>>>> uvm_pr_freepages(fffff40100016000, eb35ce, c69ad, eb35ce, 17bd12,0) at
>>>>> uvm_pmr_freepages+0x34f
>>>>> uvm_page_init(ffffffff83135ee8, ffffffff83135ef0,f12e1d7450ed3ebe,
>>>>> 8,1001000, bfff50) at uvm_page_init+0x1f6
>>>>> uum_init(672615f6a3c88733,8,1001000, ffffffff83135f10, 
>>>>> ffffffff82baa680,28)
>>>>> at uvm_init+0x42
>>>>> main(0.0.1001000,1, ffffffff81e2bbf0, ffffffff83135f40) at main+0x90
>>>>> end trace frame: 0x0, count: 8
>>>>> https://www.openbsd.org/ddb.html describes the minimum info 
>>>>> required in bug
>>>>> Insufficient info makes it difficult to find and fix bugs.
>>>>> ddb{0}>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> and here:
>>>>>
>>>>> OpenBSD 7.9 (RAMDISK_CD) #396: Wed May  6 13:25:05 MDT 2026
>>>>>     [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/ 
>>>>> RAMDISK_CD
>>>>> real mem = 68567973888 (65391MB)
>>>>> avail mem = 66482925568 (63403MB)
>>>>> random: good seed from bootblocks
>>>>> mainbus0 at root
>>>>> bios0 at mainbus0: SMBIOS rev. 3.3 @ 0xcb7ec000 (76 entries)
>>>>> bios0: vendor American Megatrends Inc. version "3634" date 09/10/2025
>>>>> bios0: ASUS ROG STRIX B550-F GAMING WIFI II
>>>>> efi0 at bios0: UEFI 2.7
>>>>> efi0: American Megatrends rev 0x50011
>>>>> acpi0 at bios0: ACPI 6.2
>>>>> acpi0: tables DSDT FACP SSDT SSDT SSDT FIDT MCFG HPET IVRS VFCT 
>>>>> WPBT TPM2
>>>>> PCCT SSDT CRAT CDIT SSDT SSDT SSDT SSDT WSMT APIC SSDT SSDT FPDT
>>>>> acpitimer0 at acpi0: 3579545 Hz, 32 bits
>>>>> acpihpet0 at acpi0: 14318180 Hz
>>>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>>>>> cpu0 at mainbus0: apid 0 (boot processor)
>>>>> cpu0: AMD Ryzen 9 5950X 16-Core Processor, 3400.00 MHz, 19-21-02, 
>>>>> patch
>>>>> 0a201213
>>>>> cpu0: cpuid 1 
>>>>> edx=178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT> ecx=76f8320b<SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND>
>>>>> cpu0: cpuid 6 eax=4<ARAT> ecx=1<EFFFREQ>
>>>>> cpu0: cpuid 7.0 
>>>>> ebx=219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
>>>>> ecx=40068c<UMIP,PKU> edx=10
>>>>> cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
>>>>> cpu0: cpuid 80000001 
>>>>> edx=2fd3fbff<NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG> 
>>>>> ecx=75c237ff<LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TCE,TOPEXT,CPCTR,DBKP,PCTRL3,MWAITX>
>>>>> cpu0: cpuid 80000007 edx=6799<HWPSTATE,ITSC>
>>>>> cpu0: cpuid 80000008
>>>>> ebx=111ef657<IBPB,IBRS,STIBP,STIBP_ALL,IBRS_PREF,IBRS_SM,SSBD>
>>>>> cpu0: cpuid 8000001F
>>>>> eax=1780f<SME,SEV,PFLUSH_MSR,SEVES,REQ64BITHOST,RESTINJ,ALTINJ,DBGSTSW,VTE>
>>>>> ecx=1fd edx=1
>>>>> cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 512KB
>>>>> 64b/line 8-way L2 cache, 32MB 64b/line 16-way L3 cache
>>>>> cpu0: apic clock running at 100MHz
>>>>> cpu0: mwait min=64, max=64, C-substates=1.1, IBE
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> ioapic0 at mainbus0: apid 33 pa 0xfec00000, version 21, 24 pins, 
>>>>> can't remap
>>>>> ioapic1 at mainbus0: apid 34 pa 0xfec01000, version 21, 32 pins, 
>>>>> can't remap
>>>>> acpiprt0 at acpi0: bus 0 (PCI0)
>>>>> acpiprt1 at acpi0: bus 10 (GP12)
>>>>> acpiprt2 at acpi0: bus 11 (GP13)
>>>>> acpiprt3 at acpi0: bus -1 (GP30)
>>>>> acpiprt4 at acpi0: bus -1 (GP31)
>>>>> acpiprt5 at acpi0: bus 1 (GPP0)
>>>>> acpiprt6 at acpi0: bus -1 (GPP2)
>>>>> acpiprt7 at acpi0: bus -1 (GPP3)
>>>>> acpiprt8 at acpi0: bus -1 (GPP4)
>>>>> acpiprt9 at acpi0: bus -1 (GPP5)
>>>>> acpiprt10 at acpi0: bus -1 (GPP6)
>>>>> acpiprt11 at acpi0: bus -1 (GPP7)
>>>>> acpiprt12 at acpi0: bus 9 (GPP8)
>>>>> acpiprt13 at acpi0: bus -1 (GPP9)
>>>>> acpiprt14 at acpi0: bus -1 (GPPA)
>>>>> acpiprt15 at acpi0: bus -1 (GPPB)
>>>>> acpiprt16 at acpi0: bus -1 (GPPC)
>>>>> acpiprt17 at acpi0: bus -1 (GPPD)
>>>>> acpiprt18 at acpi0: bus -1 (GPPE)
>>>>> acpiprt19 at acpi0: bus -1 (GPPF)
>>>>> acpiprt20 at acpi0: bus -1 (GP10)
>>>>> acpiprt21 at acpi0: bus 2 (GPP1)
>>>>> acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
>>>>> acpicmos0 at acpi0
>>>>> "PNP0C0C" at acpi0 not configured
>>>>> amdgpio0 at acpi0 GPIO uid 0 addr 0xfed81500/0x400 irq 7, 184 pins
>>>>> dwiic0 at acpi0 I2CD addr 0xfedc5000/0x1000 irq 6
>>>>> iic0 at dwiic0
>>>>> "MSFT0101" at acpi0 not configured
>>>>> "PNP0C14" at acpi0 not configured
>>>>> "ACPI0010" at acpi0 not configured
>>>>> "AMDIF030" at acpi0 not configured
>>>>> "PNP0C14" at acpi0 not configured
>>>>> "PNP0C14" at acpi0 not configured
>>>>> "PNP0C14" at acpi0 not configured
>>>>> "PNP0C14" at acpi0 not configured
>>>>> pci0 at mainbus0 bus 0
>>>>> pchb0 at pci0 dev 0 function 0 "AMD 17h Root Complex" rev 0x00
>>>>> "AMD 17h IOMMU" rev 0x00 at pci0 dev 0 function 2 not configured
>>>>> pchb1 at pci0 dev 1 function 0 "AMD 17h Host" rev 0x00
>>>>> ppb0 at pci0 dev 1 function 1 "AMD 17h PCIE" rev 0x00: msi
>>>>> pci1 at ppb0 bus 1
>>>>> nvme0 at pci1 dev 0 function 0 "Crucial P310" rev 0x01: msix, NVMe 2.0
>>>>> nvme0: CT500P310SSD8, firmware VACR001, serial 25164FA6A1F7
>>>>> scsibus0 at nvme0: 2 targets, initiator 0
>>>>> sd0 at scsibus0 targ 1 lun 0: <NVMe, CT500P310SSD8, VACR>
>>>>> sd0: 476940MB, 512 bytes/sector, 976773168 sectors
>>>>> ppb1 at pci0 dev 1 function 2 "AMD 17h PCIE" rev 0x00: msi
>>>>> pci2 at ppb1 bus 2
>>>>> xhci0 at pci2 dev 0 function 0 "AMD 500 Series xHCI" rev 0x00: 
>>>>> msix, xHCI
>>>>> 1.10
>>>>> usb0 at xhci0: USB revision 3.0
>>>>> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 
>>>>> 3.00/1.00
>>>>> addr 1
>>>>> ahci0 at pci2 dev 0 function 1 "AMD 500 Series AHCI" rev 0x00: msi, 
>>>>> AHCI
>>>>> 1.3.1
>>>>> scsibus1 at ahci0: 32 targets
>>>>> ppb2 at pci2 dev 0 function 2 "AMD 500 Series PCIE" rev 0x00
>>>>> pci3 at ppb2 bus 3
>>>>> ppb3 at pci3 dev 0 function 0 "AMD 500 Series PCIE" rev 0x00: msi
>>>>> pci4 at ppb3 bus 4
>>>>> ppb4 at pci3 dev 1 function 0 "AMD 500 Series PCIE" rev 0x00: msi
>>>>> pci5 at ppb4 bus 5
>>>>> ppb5 at pci3 dev 2 function 0 "AMD 500 Series PCIE" rev 0x00: msi
>>>>> pci6 at ppb5 bus 6
>>>>> iwx0 at pci6 dev 0 function 0 "Intel Wi-Fi 6 AX210" rev 0x1a, msix
>>>>> ppb6 at pci3 dev 3 function 0 "AMD 500 Series PCIE" rev 0x00: msi
>>>>> pci7 at ppb6 bus 7
>>>>> ppb7 at pci3 dev 9 function 0 "AMD 500 Series PCIE" rev 0x00: msi
>>>>> pci8 at ppb7 bus 8
>>>>> igc0 at pci8 dev 0 function 0 "Intel I226-V" rev 0x06, msix, 1 queue,
>>>>> address [_MAC_XXXXXXXXXX]
>>>>> pchb2 at pci0 dev 2 function 0 "AMD 17h Host" rev 0x00
>>>>> pchb3 at pci0 dev 3 function 0 "AMD 17h Host" rev 0x00
>>>>> ppb8 at pci0 dev 3 function 1 "AMD 17h PCIE" rev 0x00: msi
>>>>> pci9 at ppb8 bus 9
>>>>> "ATI Bonaire" rev 0x00 at pci9 dev 0 function 0 not configured
>>>>> vendor "ATI", unknown product 0xaac0 (class multimedia subclass 
>>>>> hdaudio, rev
>>>>> 0x00) at pci9 dev 0 function 1 not configured
>>>>> pchb4 at pci0 dev 4 function 0 "AMD 17h Host" rev 0x00
>>>>> pchb5 at pci0 dev 5 function 0 "AMD 17h Host" rev 0x00
>>>>> pchb6 at pci0 dev 7 function 0 "AMD 17h Host" rev 0x00
>>>>> ppb9 at pci0 dev 7 function 1 "AMD 17h PCIE" rev 0x00
>>>>> pci10 at ppb9 bus 10
>>>>> vendor "AMD", unknown product 0x148a (class instrumentation unknown 
>>>>> subclass
>>>>> 0x00, rev 0x00) at pci10 dev 0 function 0 not configured
>>>>> pchb7 at pci0 dev 8 function 0 "AMD 17h Host" rev 0x00
>>>>> ppb10 at pci0 dev 8 function 1 "AMD 17h PCIE" rev 0x00
>>>>> pci11 at ppb10 bus 11
>>>>> vendor "AMD", unknown product 0x1485 (class instrumentation unknown 
>>>>> subclass
>>>>> 0x00, rev 0x00) at pci11 dev 0 function 0 not configured
>>>>> ccp0 at pci11 dev 0 function 1 "AMD 17h Crypto" rev 0x00
>>>>> xhci1 at pci11 dev 0 function 3 "AMD 17h xHCI" rev 0x00: msix, xHCI 
>>>>> 1.10
>>>>> usb1 at xhci1: USB revision 3.0
>>>>> uhub1 at usb1 configuration 1 interface 0 "AMD xHCI root hub" rev 
>>>>> 3.00/1.00
>>>>> addr 1
>>>>> "AMD 17h HD Audio" rev 0x00 at pci11 dev 0 function 4 not configured
>>>>> "AMD FCH SMBus" rev 0x61 at pci0 dev 20 function 0 not configured
>>>>> "AMD FCH LPC" rev 0x51 at pci0 dev 20 function 3 not configured
>>>>> pchb8 at pci0 dev 24 function 0 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb9 at pci0 dev 24 function 1 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb10 at pci0 dev 24 function 2 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb11 at pci0 dev 24 function 3 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb12 at pci0 dev 24 function 4 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb13 at pci0 dev 24 function 5 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb14 at pci0 dev 24 function 6 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb15 at pci0 dev 24 function 7 "AMD 17h Data Fabric" rev 0x00
>>>>> isa0 at mainbus0
>>>>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>>>>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>>>>> pckbd0 at pckbc0 (kbd slot)
>>>>> wskbd0 at pckbd0: console keyboard
>>>>> efifb0 at mainbus0: 1920x1200, 32bpp
>>>>> wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using 
>>>>> wskbd0
>>>>> umass0 at uhub0 port 8 configuration 1 interface 0 "vendor 0x13fe 
>>>>> Patriot
>>>>> Memory" rev 2.00/1.00 addr 2
>>>>> umass0: using SCSI over Bulk-Only
>>>>> scsibus2 at umass0: 2 targets, initiator 0
>>>>> sd1 at scsibus2 targ 1 lun 0: <, Patriot Memory, PMAP> removable
>>>>> serial.13fe3e00070157349FF9
>>>>> sd1: 7640MB, 512 bytes/sector, 15646720 sectors
>>>>> uhidev0 at uhub0 port 10 configuration 1 interface 2 "AsusTek 
>>>>> Computer Inc.
>>>>> AURA LED Controller" rev 2.00/1.00 addr 3
>>>>> uhidev0: iclass 3/0
>>>>> "AsusTek Computer Inc. AURA LED Controller" rev 2.00/1.00 addr 3 at 
>>>>> uhub0
>>>>> port 10 configuration 1 not configured
>>>>> uhub2 at uhub0 port 11 configuration 1 interface 0 "vendor 0x05e3 
>>>>> USB2.0
>>>>> Hub" rev 2.00/60.70 addr 4
>>>>> uhidev1 at uhub0 port 13 configuration 1 interface 0 "Keychron 
>>>>> Keychron C2"
>>>>> rev 2.00/1.04 addr 5
>>>>> uhidev1: iclass 3/1
>>>>> ukbd0 at uhidev1
>>>>> wskbd1 at ukbd0 mux 1
>>>>> wskbd1: connecting to wsdisplay0
>>>>> uhidev2 at uhub0 port 13 configuration 1 interface 1 "Keychron 
>>>>> Keychron C2"
>>>>> rev 2.00/1.04 addr 5
>>>>> uhidev2: iclass 3/1, 3 report ids
>>>>> ukbd1 at uhidev2 reportid 1
>>>>> wskbd2 at ukbd1 mux 1
>>>>> wskbd2: connecting to wsdisplay0
>>>>> uhid at uhidev2 reportid 2 not configured
>>>>> uhid at uhidev2 reportid 3 not configured
>>>>> uhidev3 at uhub1 port 1 configuration 1 interface 0 "Logitech USB 
>>>>> Receiver"
>>>>> rev 2.00/5.03 addr 2
>>>>> uhidev3: iclass 3/1
>>>>> ukbd2 at uhidev3
>>>>> wskbd3 at ukbd2 mux 1
>>>>> wskbd3: connecting to wsdisplay0
>>>>> uhidev4 at uhub1 port 1 configuration 1 interface 1 "Logitech USB 
>>>>> Receiver"
>>>>> rev 2.00/5.03 addr 2
>>>>> uhidev4: iclass 3/1, 11 report ids
>>>>> uhid at uhidev4 reportid 2 not configured
>>>>> uhid at uhidev4 reportid 3 not configured
>>>>> uhid at uhidev4 reportid 4 not configured
>>>>> uhid at uhidev4 reportid 11 not configured
>>>>> uhidev5 at uhub1 port 1 configuration 1 interface 2 "Logitech USB 
>>>>> Receiver"
>>>>> rev 2.00/5.03 addr 2
>>>>> uhidev5: iclass 3/0, 17 report ids
>>>>> uhid at uhidev5 reportid 16 not configured
>>>>> uhid at uhidev5 reportid 17 not configured
>>>>> uhidev6 at uhub1 port 1 configuration 1 interface 3 "Logitech USB 
>>>>> Receiver"
>>>>> rev 2.00/5.03 addr 2
>>>>> uhidev6: iclass 3/0, 42 report ids
>>>>> uhid at uhidev6 reportid 40 not configured
>>>>> uhid at uhidev6 reportid 41 not configured
>>>>> uhid at uhidev6 reportid 42 not configured
>>>>> softraid0 at root
>>>>> scsibus3 at softraid0: 256 targets
>>>>> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
>>>>> sd2: 476679MB, 512 bytes/sector, 976240063 sectors
>>>>> root on rd0a swap on rd0b dump on rd0b
>>>>> WARNING: CHECK AND RESET THE DATE!
>>>>> iwx0: could not read firmware iwx-ty-a0-gf-a0-77 (error 2)
>>>>> iwx0: failed to load init firmware
>>>>
>>>>> Kernel panic north
>>>>> L using 4947304 bytes of bsd ELF symbol table ]
>>>>> Copyright (c) 1982, 1986, 1989, 1991, 1993
>>>>> The Regents of the University of California. All rights reserved. o 
>>>>> CaLifornia,
>>>>> Copyright (C) 1995-2826 OpenBSD. All rights reserved. https:// 
>>>>> www.OpenBSD.org
>>>>>
>>>>> panic: kernel diagnostic assertion "atop(VM_PAGE_TO_PHYS(&pg[i])) 
>>>>> == atop(VM_PAGE_TO_PHYS(pg)) + i" failed: file "/usr/
>>>>> src/sys/uvm/uvm_pmemrange.c", Line 1316
>>>>> Stopped at db_enter+0x14: popq    %rgp
>>>>>   TID    PID    UID    PRFLAGS    PFLAGS    CPU    COMMAND
>>>>> CPU COMMAND
>>>>> db_enter(10, ffffffff83135d40,282, 8, ffffffff8185af94, 
>>>>> ffffffff83135d40) at db_enter+0x14
>>>>> panic(ffffffff826a4d85, ffffffff826a4d85, fffff40100016000, eb35ce, 
>>>>> ffffffff82ad6c77, ffffffff83135d50) at panic+0xd5
>>>>> __assert(ffffffff826e0978, ffffffff8265b0fe,524, ffffffff826c4145, 
>>>>> ffffffff812efe69, ffffffff83135df0) at _assert+0x29
>>>>> uvm_pr_freepages(fffff40100016000, eb35ce, c69ad, eb35ce, 17bd12,0) 
>>>>> at uvm_pmr_freepages+0x34f
>>>>> uvm_page_init(ffffffff83135ee8, ffffffff83135ef0,f12e1d7450ed3ebe, 
>>>>> 8,1001000, bfff50) at uvm_page_init+0x1f6
>>>>> uum_init(672615f6a3c88733,8,1001000, ffffffff83135f10, 
>>>>> ffffffff82baa680,28) at uvm_init+0x42
>>>>> main(0.0.1001000,1, ffffffff81e2bbf0, ffffffff83135f40) at main+0x90
>>>>> end trace frame: 0x0, count: 8
>>>>> https://www.openbsd.org/ddb.html describes the minimum info 
>>>>> required in bug
>>>>> Insufficient info makes it difficult to find and fix bugs.
>>>>> ddb{0}>
>>>>
>>>>> OpenBSD 7.9 (RAMDISK_CD) #396: Wed May  6 13:25:05 MDT 2026
>>>>>     [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/ 
>>>>> RAMDISK_CD
>>>>> real mem = 68567973888 (65391MB)
>>>>> avail mem = 66482925568 (63403MB)
>>>>> random: good seed from bootblocks
>>>>> mainbus0 at root
>>>>> bios0 at mainbus0: SMBIOS rev. 3.3 @ 0xcb7ec000 (76 entries)
>>>>> bios0: vendor American Megatrends Inc. version "3634" date 09/10/2025
>>>>> bios0: ASUS ROG STRIX B550-F GAMING WIFI II
>>>>> efi0 at bios0: UEFI 2.7
>>>>> efi0: American Megatrends rev 0x50011
>>>>> acpi0 at bios0: ACPI 6.2
>>>>> acpi0: tables DSDT FACP SSDT SSDT SSDT FIDT MCFG HPET IVRS VFCT 
>>>>> WPBT TPM2 PCCT SSDT CRAT CDIT SSDT SSDT SSDT SSDT WSMT APIC SSDT 
>>>>> SSDT FPDT
>>>>> acpitimer0 at acpi0: 3579545 Hz, 32 bits
>>>>> acpihpet0 at acpi0: 14318180 Hz
>>>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>>>>> cpu0 at mainbus0: apid 0 (boot processor)
>>>>> cpu0: AMD Ryzen 9 5950X 16-Core Processor, 3400.00 MHz, 19-21-02, 
>>>>> patch 0a201213
>>>>> cpu0: cpuid 1 
>>>>> edx=178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT> ecx=76f8320b<SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND>
>>>>> cpu0: cpuid 6 eax=4<ARAT> ecx=1<EFFFREQ>
>>>>> cpu0: cpuid 7.0 
>>>>> ebx=219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> ecx=40068c<UMIP,PKU> edx=10
>>>>> cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
>>>>> cpu0: cpuid 80000001 
>>>>> edx=2fd3fbff<NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG> 
>>>>> ecx=75c237ff<LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TCE,TOPEXT,CPCTR,DBKP,PCTRL3,MWAITX>
>>>>> cpu0: cpuid 80000007 edx=6799<HWPSTATE,ITSC>
>>>>> cpu0: cpuid 80000008 
>>>>> ebx=111ef657<IBPB,IBRS,STIBP,STIBP_ALL,IBRS_PREF,IBRS_SM,SSBD>
>>>>> cpu0: cpuid 8000001F 
>>>>> eax=1780f<SME,SEV,PFLUSH_MSR,SEVES,REQ64BITHOST,RESTINJ,ALTINJ,DBGSTSW,VTE> ecx=1fd edx=1
>>>>> cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 
>>>>> 512KB 64b/line 8-way L2 cache, 32MB 64b/line 16-way L3 cache
>>>>> cpu0: apic clock running at 100MHz
>>>>> cpu0: mwait min=64, max=64, C-substates=1.1, IBE
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> cpu at mainbus0: not configured
>>>>> ioapic0 at mainbus0: apid 33 pa 0xfec00000, version 21, 24 pins, 
>>>>> can't remap
>>>>> ioapic1 at mainbus0: apid 34 pa 0xfec01000, version 21, 32 pins, 
>>>>> can't remap
>>>>> acpiprt0 at acpi0: bus 0 (PCI0)
>>>>> acpiprt1 at acpi0: bus 10 (GP12)
>>>>> acpiprt2 at acpi0: bus 11 (GP13)
>>>>> acpiprt3 at acpi0: bus -1 (GP30)
>>>>> acpiprt4 at acpi0: bus -1 (GP31)
>>>>> acpiprt5 at acpi0: bus 1 (GPP0)
>>>>> acpiprt6 at acpi0: bus -1 (GPP2)
>>>>> acpiprt7 at acpi0: bus -1 (GPP3)
>>>>> acpiprt8 at acpi0: bus -1 (GPP4)
>>>>> acpiprt9 at acpi0: bus -1 (GPP5)
>>>>> acpiprt10 at acpi0: bus -1 (GPP6)
>>>>> acpiprt11 at acpi0: bus -1 (GPP7)
>>>>> acpiprt12 at acpi0: bus 9 (GPP8)
>>>>> acpiprt13 at acpi0: bus -1 (GPP9)
>>>>> acpiprt14 at acpi0: bus -1 (GPPA)
>>>>> acpiprt15 at acpi0: bus -1 (GPPB)
>>>>> acpiprt16 at acpi0: bus -1 (GPPC)
>>>>> acpiprt17 at acpi0: bus -1 (GPPD)
>>>>> acpiprt18 at acpi0: bus -1 (GPPE)
>>>>> acpiprt19 at acpi0: bus -1 (GPPF)
>>>>> acpiprt20 at acpi0: bus -1 (GP10)
>>>>> acpiprt21 at acpi0: bus 2 (GPP1)
>>>>> acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
>>>>> acpicmos0 at acpi0
>>>>> "PNP0C0C" at acpi0 not configured
>>>>> amdgpio0 at acpi0 GPIO uid 0 addr 0xfed81500/0x400 irq 7, 184 pins
>>>>> dwiic0 at acpi0 I2CD addr 0xfedc5000/0x1000 irq 6
>>>>> iic0 at dwiic0
>>>>> "MSFT0101" at acpi0 not configured
>>>>> "PNP0C14" at acpi0 not configured
>>>>> "ACPI0010" at acpi0 not configured
>>>>> "AMDIF030" at acpi0 not configured
>>>>> "PNP0C14" at acpi0 not configured
>>>>> "PNP0C14" at acpi0 not configured
>>>>> "PNP0C14" at acpi0 not configured
>>>>> "PNP0C14" at acpi0 not configured
>>>>> pci0 at mainbus0 bus 0
>>>>> pchb0 at pci0 dev 0 function 0 "AMD 17h Root Complex" rev 0x00
>>>>> "AMD 17h IOMMU" rev 0x00 at pci0 dev 0 function 2 not configured
>>>>> pchb1 at pci0 dev 1 function 0 "AMD 17h Host" rev 0x00
>>>>> ppb0 at pci0 dev 1 function 1 "AMD 17h PCIE" rev 0x00: msi
>>>>> pci1 at ppb0 bus 1
>>>>> nvme0 at pci1 dev 0 function 0 "Crucial P310" rev 0x01: msix, NVMe 2.0
>>>>> nvme0: CT500P310SSD8, firmware VACR001, serial 25164FA6A1F7
>>>>> scsibus0 at nvme0: 2 targets, initiator 0
>>>>> sd0 at scsibus0 targ 1 lun 0: <NVMe, CT500P310SSD8, VACR>
>>>>> sd0: 476940MB, 512 bytes/sector, 976773168 sectors
>>>>> ppb1 at pci0 dev 1 function 2 "AMD 17h PCIE" rev 0x00: msi
>>>>> pci2 at ppb1 bus 2
>>>>> xhci0 at pci2 dev 0 function 0 "AMD 500 Series xHCI" rev 0x00: 
>>>>> msix, xHCI 1.10
>>>>> usb0 at xhci0: USB revision 3.0
>>>>> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 
>>>>> 3.00/1.00 addr 1
>>>>> ahci0 at pci2 dev 0 function 1 "AMD 500 Series AHCI" rev 0x00: msi, 
>>>>> AHCI 1.3.1
>>>>> scsibus1 at ahci0: 32 targets
>>>>> ppb2 at pci2 dev 0 function 2 "AMD 500 Series PCIE" rev 0x00
>>>>> pci3 at ppb2 bus 3
>>>>> ppb3 at pci3 dev 0 function 0 "AMD 500 Series PCIE" rev 0x00: msi
>>>>> pci4 at ppb3 bus 4
>>>>> ppb4 at pci3 dev 1 function 0 "AMD 500 Series PCIE" rev 0x00: msi
>>>>> pci5 at ppb4 bus 5
>>>>> ppb5 at pci3 dev 2 function 0 "AMD 500 Series PCIE" rev 0x00: msi
>>>>> pci6 at ppb5 bus 6
>>>>> iwx0 at pci6 dev 0 function 0 "Intel Wi-Fi 6 AX210" rev 0x1a, msix
>>>>> ppb6 at pci3 dev 3 function 0 "AMD 500 Series PCIE" rev 0x00: msi
>>>>> pci7 at ppb6 bus 7
>>>>> ppb7 at pci3 dev 9 function 0 "AMD 500 Series PCIE" rev 0x00: msi
>>>>> pci8 at ppb7 bus 8
>>>>> igc0 at pci8 dev 0 function 0 "Intel I226-V" rev 0x06, msix, 1 
>>>>> queue, address [_MAC_XXXXXXXXXX]
>>>>> pchb2 at pci0 dev 2 function 0 "AMD 17h Host" rev 0x00
>>>>> pchb3 at pci0 dev 3 function 0 "AMD 17h Host" rev 0x00
>>>>> ppb8 at pci0 dev 3 function 1 "AMD 17h PCIE" rev 0x00: msi
>>>>> pci9 at ppb8 bus 9
>>>>> "ATI Bonaire" rev 0x00 at pci9 dev 0 function 0 not configured
>>>>> vendor "ATI", unknown product 0xaac0 (class multimedia subclass 
>>>>> hdaudio, rev 0x00) at pci9 dev 0 function 1 not configured
>>>>> pchb4 at pci0 dev 4 function 0 "AMD 17h Host" rev 0x00
>>>>> pchb5 at pci0 dev 5 function 0 "AMD 17h Host" rev 0x00
>>>>> pchb6 at pci0 dev 7 function 0 "AMD 17h Host" rev 0x00
>>>>> ppb9 at pci0 dev 7 function 1 "AMD 17h PCIE" rev 0x00
>>>>> pci10 at ppb9 bus 10
>>>>> vendor "AMD", unknown product 0x148a (class instrumentation unknown 
>>>>> subclass 0x00, rev 0x00) at pci10 dev 0 function 0 not configured
>>>>> pchb7 at pci0 dev 8 function 0 "AMD 17h Host" rev 0x00
>>>>> ppb10 at pci0 dev 8 function 1 "AMD 17h PCIE" rev 0x00
>>>>> pci11 at ppb10 bus 11
>>>>> vendor "AMD", unknown product 0x1485 (class instrumentation unknown 
>>>>> subclass 0x00, rev 0x00) at pci11 dev 0 function 0 not configured
>>>>> ccp0 at pci11 dev 0 function 1 "AMD 17h Crypto" rev 0x00
>>>>> xhci1 at pci11 dev 0 function 3 "AMD 17h xHCI" rev 0x00: msix, xHCI 
>>>>> 1.10
>>>>> usb1 at xhci1: USB revision 3.0
>>>>> uhub1 at usb1 configuration 1 interface 0 "AMD xHCI root hub" rev 
>>>>> 3.00/1.00 addr 1
>>>>> "AMD 17h HD Audio" rev 0x00 at pci11 dev 0 function 4 not configured
>>>>> "AMD FCH SMBus" rev 0x61 at pci0 dev 20 function 0 not configured
>>>>> "AMD FCH LPC" rev 0x51 at pci0 dev 20 function 3 not configured
>>>>> pchb8 at pci0 dev 24 function 0 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb9 at pci0 dev 24 function 1 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb10 at pci0 dev 24 function 2 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb11 at pci0 dev 24 function 3 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb12 at pci0 dev 24 function 4 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb13 at pci0 dev 24 function 5 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb14 at pci0 dev 24 function 6 "AMD 17h Data Fabric" rev 0x00
>>>>> pchb15 at pci0 dev 24 function 7 "AMD 17h Data Fabric" rev 0x00
>>>>> isa0 at mainbus0
>>>>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>>>>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>>>>> pckbd0 at pckbc0 (kbd slot)
>>>>> wskbd0 at pckbd0: console keyboard
>>>>> efifb0 at mainbus0: 1920x1200, 32bpp
>>>>> wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using 
>>>>> wskbd0
>>>>> umass0 at uhub0 port 8 configuration 1 interface 0 "vendor 0x13fe 
>>>>> Patriot Memory" rev 2.00/1.00 addr 2
>>>>> umass0: using SCSI over Bulk-Only
>>>>> scsibus2 at umass0: 2 targets, initiator 0
>>>>> sd1 at scsibus2 targ 1 lun 0: <, Patriot Memory, PMAP> removable 
>>>>> serial.13fe3e00070157349FF9
>>>>> sd1: 7640MB, 512 bytes/sector, 15646720 sectors
>>>>> uhidev0 at uhub0 port 10 configuration 1 interface 2 "AsusTek 
>>>>> Computer Inc. AURA LED Controller" rev 2.00/1.00 addr 3
>>>>> uhidev0: iclass 3/0
>>>>> "AsusTek Computer Inc. AURA LED Controller" rev 2.00/1.00 addr 3 at 
>>>>> uhub0 port 10 configuration 1 not configured
>>>>> uhub2 at uhub0 port 11 configuration 1 interface 0 "vendor 0x05e3 
>>>>> USB2.0 Hub" rev 2.00/60.70 addr 4
>>>>> uhidev1 at uhub0 port 13 configuration 1 interface 0 "Keychron 
>>>>> Keychron C2" rev 2.00/1.04 addr 5
>>>>> uhidev1: iclass 3/1
>>>>> ukbd0 at uhidev1
>>>>> wskbd1 at ukbd0 mux 1
>>>>> wskbd1: connecting to wsdisplay0
>>>>> uhidev2 at uhub0 port 13 configuration 1 interface 1 "Keychron 
>>>>> Keychron C2" rev 2.00/1.04 addr 5
>>>>> uhidev2: iclass 3/1, 3 report ids
>>>>> ukbd1 at uhidev2 reportid 1
>>>>> wskbd2 at ukbd1 mux 1
>>>>> wskbd2: connecting to wsdisplay0
>>>>> uhid at uhidev2 reportid 2 not configured
>>>>> uhid at uhidev2 reportid 3 not configured
>>>>> uhidev3 at uhub1 port 1 configuration 1 interface 0 "Logitech USB 
>>>>> Receiver" rev 2.00/5.03 addr 2
>>>>> uhidev3: iclass 3/1
>>>>> ukbd2 at uhidev3
>>>>> wskbd3 at ukbd2 mux 1
>>>>> wskbd3: connecting to wsdisplay0
>>>>> uhidev4 at uhub1 port 1 configuration 1 interface 1 "Logitech USB 
>>>>> Receiver" rev 2.00/5.03 addr 2
>>>>> uhidev4: iclass 3/1, 11 report ids
>>>>> uhid at uhidev4 reportid 2 not configured
>>>>> uhid at uhidev4 reportid 3 not configured
>>>>> uhid at uhidev4 reportid 4 not configured
>>>>> uhid at uhidev4 reportid 11 not configured
>>>>> uhidev5 at uhub1 port 1 configuration 1 interface 2 "Logitech USB 
>>>>> Receiver" rev 2.00/5.03 addr 2
>>>>> uhidev5: iclass 3/0, 17 report ids
>>>>> uhid at uhidev5 reportid 16 not configured
>>>>> uhid at uhidev5 reportid 17 not configured
>>>>> uhidev6 at uhub1 port 1 configuration 1 interface 3 "Logitech USB 
>>>>> Receiver" rev 2.00/5.03 addr 2
>>>>> uhidev6: iclass 3/0, 42 report ids
>>>>> uhid at uhidev6 reportid 40 not configured
>>>>> uhid at uhidev6 reportid 41 not configured
>>>>> uhid at uhidev6 reportid 42 not configured
>>>>> softraid0 at root
>>>>> scsibus3 at softraid0: 256 targets
>>>>> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
>>>>> sd2: 476679MB, 512 bytes/sector, 976240063 sectors
>>>>> root on rd0a swap on rd0b dump on rd0b
>>>>> WARNING: CHECK AND RESET THE DATE!
>>>>> iwx0: could not read firmware iwx-ty-a0-gf-a0-77 (error 2)
>>>>> iwx0: failed to load init firmware
>>>>
>>
>>
>