Re: Install OpenBSD 7.9 on Raspberry Pi 5: serial console not working

<[email protected]> Sun, 2 Aug 2026 20:22:46 -0700

Newsgroups	gmane.os.openbsd.misc
Message-ID	<20260802202246.71b1a33f@amail1>

On Mon, 3 Aug 2026 08:55:37 +0800
Sadeep <[email protected]> wrote:

> > I experienced the same situation. Finally, I used
> > 
> > https://www.berrybase.de/uart-debug-usb-kabel-fuer-raspberry-pi-5-schwarz-1m
> > 
> > and the 3-pin UART connector.
> > 
> > See:
> > https://pip-assets.raspberrypi.com/categories/885-raspberry-pi-debug-probe/documents/RP-008189-DS-1-debug-connector-specification.pdf  
> 
> Good to know. I ordered a 3-pin JST connector as well.

fwiw, I find it easy to use another sbc gpio 3.3v system with uarts and three dupont 2.54mm wires socket/socket wires.  (not all of them have their pins in a row like the pi's)