em error with dual-port NIC on G5 1.8Ghz

Geoffrey Peterson <[email protected]>
Newsgroups gmane.os.openbsd.ppc
Message-ID <CAAVLyMZVQWsDdy_Zg5_WzEqrsLZMSJpKSu5qX_g-R0hvCKQAQQ@mail.gmail.com> 
Hello,

I just installed an Intel PRO/1000MT Dual Port Server Adapter
(PWLA8492MT) PCI-X card into my G5 tower running OpenBSD5.9 and it’s
not being handled correctly at boot, causing a freeze (technically,
starting adb0 causes the freeze, but this seems to be due to em
throwing "can't find i/o space" when configuring the NIC's second
ethernet port).

Both the G5 (www.everymac.com/systems/apple/powermac_g5/specs/powermac_g5_1.8.html)
and the dual-port NIC are listed as supported hardware
(man.openbsd.org/OpenBSD-current/man4/em.4).  The G5 boots fine
without the new NIC and also boots fine if I “disable em” in
boot_config (although then, obviously, the NIC isn’t configured).
I’ve tried the card unsuccessfully in all three of the available PCI-X
slots - in the below it’s in Slot 4.  I unfortunately don’t have
another machine on which to test to confirm the card itself is not
faulty.

Attached files are:
1) dmesg from stalled boot with NIC (transcribed from screen)
2) dmesg from successful boot without NIC
3) dmesg from successful boot with NIC but “em disabled”
4) “dump-device-tree” output from open firmware with NIC installed (via telnet)

I'd like to be helpful: if the fix for this issue makes the macppc
code more robust that’s great...but if it’s just messing with
configurations then no stress and I'll grab some different NIC cards
and not waste anyone's time :)  Please let me know if I can send
anything else to be helpful!

Many thanks in advance,
Geoffrey
1_dmesg_NIC.txt (text/plain, 3.6 KB) 
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.9 (GENERIC) #913: Fri Feb 26 03:34:07 MST 2016
    [email protected]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1610612736 (1536MB)
avail mem = 1528594432 (1457MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac7,2
cpu0 at mainbus0: 970 (Revision 0x202): 1800 MHz
mem0 at mainbus0
spdmem0 at mem0: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at mem0: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem2 at mem0: 256MB DDR SDRAM non-parity PC3200CL3.0
spdmem3 at mem0: 256MB DDR SDRAM non-parity PC3200CL3.0
memc0 at mainbus0: u3 rev 0x32
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
"cy2213" at iic0 addr 0x65 not configured
lmtemp0 at iic0 addr 0x4a: ds1775
maxtmp0 at iic0 addr 0x4c: max6690
maxtmp1 at iic0 addr 0x4e: max6690
"cy28508" at iic0 addr 0x69 not configured
fcu0 at iic0 addr 0xaf
"pca9556" at iic0 addr 0x18 not configured
adc0 at iic0 addr 0x2c: ad7417
"24256" at iic0 addr 0x50 not configured
"dart" at memc0 offset 0xf8033000 not configured
"mpic" at memc0 offset 0xf8040000 not configured
mpcpcibr0 at mainbus0 pci: u3-agp
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple U3 AGP" rev 0x00
appleagp0 at pchb0
agp0 at appleagp0: aperture at 0x0, size 0x10000000
vgafb0 at pci0 dev 16 function 0 "NVIDIA GeForce FX 5200 Ultra" rev 0xa1
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ht0 at mainbus0: u3-ht, 8 devices
pci1 at ht0 bus 0
hpb0 at pci1 dev 1 function 0 "AMD 8131 PCIX" rev 0x12: 3 sources
hpb0: multiple definition for irq 0
pci2 at hpb0 bus 6
hpb1 at pci1 dev 2 function 0 "AMD 8131 PCIX" rev 0x12: 3 sources
hpb1: multiple definition for irq 0
pci3 at hpb1 bus 7
em0 at pci3 dev 4 function 0 “Intel 82546EB” rev 0x01: ire 54, address 00:07:e9:18:ac:74
em1 at pci3 dev 4 function 1 “Intel 82546EB” rev 0x01: cannot find i/o space
hpb2 at pci1 dev 3 function 0 "Apple U3" rev 0x00: 85 sources
pci4 at hpb2 bus 1
macobio0 at pci4 dev 7 function 0 "Apple K2 Macio" rev 0x20
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 770302 LE
macgpio0 at macobio0 offset 0x50
"pmu-interrupt" at macgpio0 offset 0x9 not configured
"programmer-switch" at macgpio0 offset 0x11 not configured
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1e not configured
"fcu-interrupt" at macgpio0 offset 0x15 not configured
"fcu-hw-reset" at macgpio0 offset 0x3a not configured
"slewing-done" at macgpio0 offset 0x23 not configured
"codec-input-data-mux" at macgpio0 offset 0xb not configured
"line-input-detect" at macgpio0 offset 0xc not configured
"codec-error-irq" at macgpio0 offset 0xd not configured
"dig-hw-reset" at macgpio0 offset 0x14 not configured
"line-output-detect" at macgpio0 offset 0x16 not configured
"headphone-detect" at macgpio0 offset 0x17 not configured
"codec-irq" at macgpio0 offset 0x18 not configured
"headphone-mute" at macgpio0 offset 0x1f not configured
"amp-mute" at macgpio0 offset 0x20 not configured
"hw-reset" at macgpio0 offset 0x24 not configured
"line-output-mute" at macgpio0 offset 0x25 not configured
"codec-clock-mux" at macgpio0 offset 0x26 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
aoa0 at macobio0 offset 0x10000: irq 30,1,2
audio0 at aoa0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0
2_dmesg_noNIC.txt (text/plain, 7.1 KB) 
[ using 560540 bytes of bsd ELF symbol table ]
console out [NVDA,Display-A] console in [keyboard], using USB
using parent NVDA,Parent:: memaddr 98000000, size 8000000 : consaddr 98004000 : ioaddr 91000000, size 1000000: width 1280 linebytes 1536 height 1024 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.9 (GENERIC) #913: Fri Feb 26 03:34:07 MST 2016
    [email protected]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1610612736 (1536MB)
avail mem = 1528594432 (1457MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac7,2
cpu0 at mainbus0: 970 (Revision 0x202): 1800 MHz
mem0 at mainbus0
spdmem0 at mem0: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at mem0: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem2 at mem0: 256MB DDR SDRAM non-parity PC3200CL3.0
spdmem3 at mem0: 256MB DDR SDRAM non-parity PC3200CL3.0
memc0 at mainbus0: u3 rev 0x32
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
"cy2213" at iic0 addr 0x65 not configured
lmtemp0 at iic0 addr 0x4a: ds1775
maxtmp0 at iic0 addr 0x4c: max6690
maxtmp1 at iic0 addr 0x4e: max6690
"cy28508" at iic0 addr 0x69 not configured
fcu0 at iic0 addr 0xaf
"pca9556" at iic0 addr 0x18 not configured
adc0 at iic0 addr 0x2c: ad7417
"24256" at iic0 addr 0x50 not configured
"dart" at memc0 offset 0xf8033000 not configured
"mpic" at memc0 offset 0xf8040000 not configured
mpcpcibr0 at mainbus0 pci: u3-agp
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple U3 AGP" rev 0x00
appleagp0 at pchb0
agp0 at appleagp0: aperture at 0x0, size 0x10000000
vgafb0 at pci0 dev 16 function 0 "NVIDIA GeForce FX 5200 Ultra" rev 0xa1
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ht0 at mainbus0: u3-ht, 8 devices
pci1 at ht0 bus 0
hpb0 at pci1 dev 1 function 0 "AMD 8131 PCIX" rev 0x12: 3 sources
hpb0: multiple definition for irq 0
pci2 at hpb0 bus 6
hpb1 at pci1 dev 2 function 0 "AMD 8131 PCIX" rev 0x12: 3 sources
hpb1: multiple definition for irq 0
pci3 at hpb1 bus 7
hpb2 at pci1 dev 3 function 0 "Apple U3" rev 0x00: 85 sources
pci4 at hpb2 bus 1
macobio0 at pci4 dev 7 function 0 "Apple K2 Macio" rev 0x20
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 770302 LE
macgpio0 at macobio0 offset 0x50
"pmu-interrupt" at macgpio0 offset 0x9 not configured
"programmer-switch" at macgpio0 offset 0x11 not configured
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1e not configured
"fcu-interrupt" at macgpio0 offset 0x15 not configured
"fcu-hw-reset" at macgpio0 offset 0x3a not configured
"slewing-done" at macgpio0 offset 0x23 not configured
"codec-input-data-mux" at macgpio0 offset 0xb not configured
"line-input-detect" at macgpio0 offset 0xc not configured
"codec-error-irq" at macgpio0 offset 0xd not configured
"dig-hw-reset" at macgpio0 offset 0x14 not configured
"line-output-detect" at macgpio0 offset 0x16 not configured
"headphone-detect" at macgpio0 offset 0x17 not configured
"codec-irq" at macgpio0 offset 0x18 not configured
"headphone-mute" at macgpio0 offset 0x1f not configured
"amp-mute" at macgpio0 offset 0x20 not configured
"hw-reset" at macgpio0 offset 0x24 not configured
"line-output-mute" at macgpio0 offset 0x25 not configured
"codec-clock-mux" at macgpio0 offset 0x26 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
aoa0 at macobio0 offset 0x10000: irq 30,1,2
audio0 at aoa0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0: battery flags 0x9, 0% charged
piic0 at adb0
iic2 at piic0
"fans" at macobio0 offset 0x4c not configured
ohci0 at pci4 dev 8 function 0 "Apple K2 USB" rev 0x00: irq 27, version 1.0, legacy support
ohci1 at pci4 dev 9 function 0 "Apple K2 USB" rev 0x00: irq 28, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
ppb0 at pci1 dev 4 function 0 "Apple U3" rev 0x00
pci5 at ppb0 bus 2
ohci2 at pci5 dev 11 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci3 at pci5 dev 11 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci5 dev 11 function 2 "NEC USB" rev 0x04: irq 63
usb2 at ehci0: USB revision 2.0
uhub2 at usb2 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ppb1 at pci1 dev 5 function 0 "Apple U3" rev 0x00
pci6 at ppb1 bus 3
kauaiata0 at pci6 dev 13 function 0 "Apple K2 ATA" rev 0x00
wdc0 at kauaiata0 irq 39: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SONY, DVD RW DW-U10A, A43h> ATAPI 5/cdrom removable
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
"Apple K2 Firewire" rev 0x00 at pci6 dev 14 function 0 not configured
ppb2 at pci1 dev 6 function 0 "Apple U3" rev 0x00
pci7 at ppb2 bus 4
gem0 at pci7 dev 15 function 0 "Apple K2 GMAC" rev 0x00: irq 41, address 00:0a:95:8d:93:42
brgphy0 at gem0 phy 1: BCM54K2 10/100/1000baseT PHY, rev. 0
ppb3 at pci1 dev 7 function 0 "Apple U3" rev 0x00
pci8 at ppb3 bus 5
pciide0 at pci8 dev 12 function 0 "ServerWorks K2 SATA" rev 0x00: DMA
pciide0: using irq 0 for native-PCI interrupt
pciide0: port 0: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST3160023AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: port 1: PHY offline
pciide0: port 2: PHY offline
pciide0: port 3: PHY offline
uhub5 at uhub2 port 1 "Apple Inc. Keyboard Hub" rev 2.00/96.15 addr 2
uhidev0 at uhub5 port 2 configuration 1 interface 0 "Apple Inc. Apple Keyboard" rev 2.00/0.70 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub5 port 2 configuration 1 interface 1 "Apple Inc. Apple Keyboard" rev 2.00/0.70 addr 3
uhidev1: iclass 3/0
uhid0 at uhidev1: input=1, output=0, feature=0
uhidev2 at uhub5 port 3 configuration 1 interface 0 "Logitech Apple Optical USB Mouse" rev 2.00/3.40 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 1 button
wsmouse0 at ums0 mux 0
uhub6 at uhub4 port 1 "Apple Computer product 0x9117" rev 1.10/1.10 addr 2
uhidev3 at uhub6 port 3 configuration 1 interface 0 "Apple Computer Studio Display" rev 1.00/2.10 addr 3
uhidev3: iclass 3/0, 228 report ids
uhid1 at uhidev3 reportid 2: input=0, output=0, feature=255
uhid2 at uhidev3 reportid 16: input=0, output=0, feature=2
uhid3 at uhidev3 reportid 214: input=0, output=0, feature=2
uhid4 at uhidev3 reportid 228: input=2, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /ht/pci@7/k2-sata-root/k2-sata@0/disk@0:/bsd
root on wd0a (2c20877a53166df8.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
3_dmesg_NIC_em-disabled.txt (text/plain, 7.3 KB) 
[ using 560540 bytes of bsd ELF symbol table ]
User Kernel Config
UKC> disable em
 70 em* disabled
UKC> exit
Continuing...
console out [NVDA,Display-A] console in [keyboard], using USB
using parent NVDA,Parent:: memaddr a8000000, size 8000000 : consaddr a8004000 : ioaddr a1000000, size 1000000: width 1280 linebytes 1536 height 1024 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.9 (GENERIC) #913: Fri Feb 26 03:34:07 MST 2016
    [email protected]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1610612736 (1536MB)
avail mem = 1528594432 (1457MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac7,2
cpu0 at mainbus0: 970 (Revision 0x202): 1800 MHz
mem0 at mainbus0
spdmem0 at mem0: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at mem0: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem2 at mem0: 256MB DDR SDRAM non-parity PC3200CL3.0
spdmem3 at mem0: 256MB DDR SDRAM non-parity PC3200CL3.0
memc0 at mainbus0: u3 rev 0x32
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
"cy2213" at iic0 addr 0x65 not configured
lmtemp0 at iic0 addr 0x4a: ds1775
maxtmp0 at iic0 addr 0x4c: max6690
maxtmp1 at iic0 addr 0x4e: max6690
"cy28508" at iic0 addr 0x69 not configured
fcu0 at iic0 addr 0xaf
"pca9556" at iic0 addr 0x18 not configured
adc0 at iic0 addr 0x2c: ad7417
"24256" at iic0 addr 0x50 not configured
"dart" at memc0 offset 0xf8033000 not configured
"mpic" at memc0 offset 0xf8040000 not configured
mpcpcibr0 at mainbus0 pci: u3-agp
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple U3 AGP" rev 0x00
appleagp0 at pchb0
agp0 at appleagp0: aperture at 0x0, size 0x10000000
vgafb0 at pci0 dev 16 function 0 "NVIDIA GeForce FX 5200 Ultra" rev 0xa1
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ht0 at mainbus0: u3-ht, 8 devices
pci1 at ht0 bus 0
hpb0 at pci1 dev 1 function 0 "AMD 8131 PCIX" rev 0x12: 3 sources
hpb0: multiple definition for irq 0
pci2 at hpb0 bus 6
hpb1 at pci1 dev 2 function 0 "AMD 8131 PCIX" rev 0x12: 3 sources
hpb1: multiple definition for irq 0
pci3 at hpb1 bus 7
"Intel 82546EB" rev 0x01 at pci3 dev 4 function 0 not configured
"Intel 82546EB" rev 0x01 at pci3 dev 4 function 1 not configured
hpb2 at pci1 dev 3 function 0 "Apple U3" rev 0x00: 85 sources
pci4 at hpb2 bus 1
macobio0 at pci4 dev 7 function 0 "Apple K2 Macio" rev 0x20
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 770302 LE
macgpio0 at macobio0 offset 0x50
"pmu-interrupt" at macgpio0 offset 0x9 not configured
"programmer-switch" at macgpio0 offset 0x11 not configured
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1e not configured
"fcu-interrupt" at macgpio0 offset 0x15 not configured
"fcu-hw-reset" at macgpio0 offset 0x3a not configured
"slewing-done" at macgpio0 offset 0x23 not configured
"codec-input-data-mux" at macgpio0 offset 0xb not configured
"line-input-detect" at macgpio0 offset 0xc not configured
"codec-error-irq" at macgpio0 offset 0xd not configured
"dig-hw-reset" at macgpio0 offset 0x14 not configured
"line-output-detect" at macgpio0 offset 0x16 not configured
"headphone-detect" at macgpio0 offset 0x17 not configured
"codec-irq" at macgpio0 offset 0x18 not configured
"headphone-mute" at macgpio0 offset 0x1f not configured
"amp-mute" at macgpio0 offset 0x20 not configured
"hw-reset" at macgpio0 offset 0x24 not configured
"line-output-mute" at macgpio0 offset 0x25 not configured
"codec-clock-mux" at macgpio0 offset 0x26 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
aoa0 at macobio0 offset 0x10000: irq 30,1,2
audio0 at aoa0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0: battery flags 0x9, 0% charged
piic0 at adb0
iic2 at piic0
"fans" at macobio0 offset 0x4c not configured
ohci0 at pci4 dev 8 function 0 "Apple K2 USB" rev 0x00: irq 27, version 1.0, legacy support
ohci1 at pci4 dev 9 function 0 "Apple K2 USB" rev 0x00: irq 28, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
ppb0 at pci1 dev 4 function 0 "Apple U3" rev 0x00
pci5 at ppb0 bus 2
ohci2 at pci5 dev 11 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci3 at pci5 dev 11 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci5 dev 11 function 2 "NEC USB" rev 0x04: irq 63
usb2 at ehci0: USB revision 2.0
uhub2 at usb2 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ppb1 at pci1 dev 5 function 0 "Apple U3" rev 0x00
pci6 at ppb1 bus 3
kauaiata0 at pci6 dev 13 function 0 "Apple K2 ATA" rev 0x00
wdc0 at kauaiata0 irq 39: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SONY, DVD RW DW-U10A, A43h> ATAPI 5/cdrom removable
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
"Apple K2 Firewire" rev 0x00 at pci6 dev 14 function 0 not configured
ppb2 at pci1 dev 6 function 0 "Apple U3" rev 0x00
pci7 at ppb2 bus 4
gem0 at pci7 dev 15 function 0 "Apple K2 GMAC" rev 0x00: irq 41, address 00:0a:95:8d:93:42
brgphy0 at gem0 phy 1: BCM54K2 10/100/1000baseT PHY, rev. 0
ppb3 at pci1 dev 7 function 0 "Apple U3" rev 0x00
pci8 at ppb3 bus 5
pciide0 at pci8 dev 12 function 0 "ServerWorks K2 SATA" rev 0x00: DMA
pciide0: using irq 0 for native-PCI interrupt
pciide0: port 0: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST3160023AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: port 1: PHY offline
pciide0: port 2: PHY offline
pciide0: port 3: PHY offline
uhub5 at uhub2 port 1 "Apple Inc. Keyboard Hub" rev 2.00/96.15 addr 2
uhidev0 at uhub5 port 2 configuration 1 interface 0 "Apple Inc. Apple Keyboard" rev 2.00/0.70 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub5 port 2 configuration 1 interface 1 "Apple Inc. Apple Keyboard" rev 2.00/0.70 addr 3
uhidev1: iclass 3/0
uhid0 at uhidev1: input=1, output=0, feature=0
uhidev2 at uhub5 port 3 configuration 1 interface 0 "Logitech Apple Optical USB Mouse" rev 2.00/3.40 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 1 button
wsmouse0 at ums0 mux 0
uhub6 at uhub4 port 1 "Apple Computer product 0x9117" rev 1.10/1.10 addr 2
uhidev3 at uhub6 port 3 configuration 1 interface 0 "Apple Computer Studio Display" rev 1.00/2.10 addr 3
uhidev3: iclass 3/0, 228 report ids
uhid1 at uhidev3 reportid 2: input=0, output=0, feature=255
uhid2 at uhidev3 reportid 16: input=0, output=0, feature=2
uhid3 at uhidev3 reportid 214: input=0, output=0, feature=2
uhid4 at uhidev3 reportid 228: input=2, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /ht/pci@7/k2-sata-root/k2-sata@0/disk@0:/bsd
root on wd0a (2c20877a53166df8.a) swap on wd0b dump on wd0b
4_ofw_NIC_dump-device-tree.txt (text/plain, 115.9 KB) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.