Error compiling kernel on macppc

Can anyone help me with this error?  I wasn't able to compile a kernel on to
apply the latest 6.2 errata patch.
 

https://hastebin.com/yoyovogeyi.vbs

 

My dmesg:

# dmesg

[ using 1150316 bytes of bsd ELF symbol table ]

console out [ATY,Rage128Pd] console in [keyboard], using USB

: memaddr 94000000, size 4000000 : consaddr 96008000 : ioaddr 90020000, size
20000: width 640 linebytes 768 height 480 depth 8

Copyright (c) 1982, 1986, 1989, 1991, 1993

        The Regents of the University of California.  All rights reserved.

Copyright (c) 1995-2017 OpenBSD. All rights reserved.
https://www.OpenBSD.org

 

OpenBSD 6.2 (GENERIC) #49: Tue Oct  3 21:32:36 MDT 2017

    [email protected]:/usr/src/sys/arch/macppc/compile/GENERIC

real mem = 1073741824 (1024MB)

avail mem = 1028235264 (980MB)

mpath0 at root

scsibus0 at mpath0: 256 targets

mainbus0 at root: model PowerMac5,1

cpu0 at mainbus0: 7400 (Revision 0x209): 500 MHz: 1MB backside cache

mem0 at mainbus0

spdmem0 at mem0: 256MB SDRAM non-parity PC100CL3

spdmem1 at mem0: 256MB SDRAM non-parity PC100CL3

spdmem2 at mem0: 512MB SDRAM non-parity PC100CL2

memc0 at mainbus0: uni-n rev 0x8

kiic0 at memc0 offset 0xf8001000

iic0 at kiic0

mpcpcibr0 at mainbus0 pci: uni-north

pci0 at mpcpcibr0 bus 0

pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00

agp at pchb0 not configured

vgafb0 at pci0 dev 16 function 0 "ATI Rage Fury" rev 0x00, mmio

wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)

wsdisplay0: screen 1-5 added (std, vt100 emulation)

mpcpcibr1 at mainbus0 pci: uni-north

pci1 at mpcpcibr1 bus 0

macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03

openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE

macgpio0 at macobio0 offset 0x50

macgpio1 at macgpio0: irq 47

pgs0 at macgpio0: irq 55

"i2s" at macobio0 offset 0x10000 not configured

"escc-legacy" at macobio0 offset 0x12000 not configured

zs0 at macobio0 offset 0x13000: irq 22,50

zstty0 at zs0 channel 0

zstty1 at zs0 channel 1

"timer" at macobio0 offset 0x15000 not configured

adb0 at macobio0 offset 0x16000

apm0 at adb0: battery flags 0x9, 0% charged

kiic1 at macobio0 offset 0x18000

iic1 at kiic1

wdc0 at macobio0 offset 0x1f000 irq 19: DMA

wd0 at wdc0 channel 0 drive 0: <MAXTOR STM3200820A>

wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors

atapiscsi0 at wdc0 channel 0 drive 1

scsibus1 at atapiscsi0: 2 targets

cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8186, F213> ATAPI
5/cdrom removable

wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2

cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2

wdc1 at macobio0 offset 0x20000 irq 20: DMA

wdc2 at macobio0 offset 0x21000 irq 21: DMA

ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0

ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0

"TI TSB12LV26 FireWire" rev 0x00 at pci1 dev 26 function 0 not configured

usb0 at ohci0: USB revision 1.0

uhub0 at usb0 configuration 1 interface 0 "Apple OHCI root hub" rev
1.00/1.00 addr 1

usb1 at ohci1: USB revision 1.0

uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev
1.00/1.00 addr 1

mpcpcibr2 at mainbus0 pci: uni-north

pci2 at mpcpcibr2 bus 0

gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41, address
00:30:65:71:c6:e2

lxtphy0 at gem0 phy 0: LXT971 10/100 PHY, rev. 1

uhub2 at uhub0 port 1 configuration 1 interface 0 "Dell USB 2.0 Hub [MTT]"
rev 2.00/1.00 addr 2

uhidev0 at uhub2 port 4 configuration 1 interface 0 "Dell Dell Wired
Multimedia Keyboard" rev 1.10/75.00 addr 3

uhidev0: iclass 3/1

ukbd0 at uhidev0: 8 variable keys, 6 key codes

wskbd0 at ukbd0: console keyboard, using wsdisplay0

uhidev1 at uhub2 port 4 configuration 1 interface 1 "Dell Dell Wired
Multimedia Keyboard" rev 1.10/75.00 addr 3

uhidev1: iclass 3/1, 5 report ids

ums0 at uhidev1 reportid 1: 3 buttons, Z dir

wsmouse0 at ums0 mux 0

uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0

uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0

uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5

vscsi0 at root

scsibus2 at vscsi0: 256 targets

softraid0 at root

scsibus3 at softraid0: 256 targets

bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd

root on wd0a (f2e51e07c6d0eed8.a) swap on wd0b dump on wd0b

uhidev2 at uhub2 port 1 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/18.00 addr 4

uhidev2: iclass 3/1

ums1 at uhidev2: 6 buttons, Z dir

wsmouse1 at ums1 mux 0