Re: Testing SMP I386

On Sunday 20 June 2004 15:56, you wrote:
> First of all, ALWAYS supply dmesg output!

OK,
dmsg:

-------------------------------------------------------------------------------------
OpenBSD 3.5-current (GENERIC.MP) #0: Sun Jun 20 15:12:23 CEST 2004
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium Pro ("GenuineIntel" 686-class, 512KB L2 cache) 200 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
real mem  = 268017664 (261736K)
avail mem = 239816704 (234196K)
using 3297 buffers containing 13504512 bytes (13188K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(7f) BIOS, date 06/23/98, BIOS32 rev. 0 @ 0xf58a6
pcibios0 at bios0: rev. 2.1 @ 0xf5640/0x13b0
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 9
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800
mainbus0: Intel MP Specification (Version 1.4) (SNI D887 PRIMERGY P6 )
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 66 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium Pro ("GenuineIntel" 686-class, 512KB L2 cache) 200 MHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel Pentium Pro ("GenuineIntel" 686-class, 512KB L2 cache) 200 MHz
cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
cpu3 at mainbus0: apid 2 (application processor)
cpu3: Intel Pentium Pro ("GenuineIntel" 686-class, 512KB L2 cache) 200 MHz
cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type ISA
mainbus0: bus 3 is type EISA
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 5: pa 0xfec01000, version 11, 12 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
"Intel 82375EB EISA" rev 0x15 at pci0 dev 1 function 0 not configured
vendor "Siemens AG / Siemens Nixdorf AG", unknown product 0x5 (class undefined 
unknown subclass 0x00, rev 0x01) at pci0 dev 2 function 0 not configured
vendor "Siemens AG / Siemens Nixdorf AG", unknown product 0x5 (class undefined 
unknown subclass 0x00, rev 0x01) at pci0 dev 2 function 1 not configured
vga1 at pci0 dev 3 function 0 "Cirrus Logic CL-GD5436" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Mylex DAC960P V2 RAID" rev 0x02 at pci0 dev 8 function 0 not configured
"Intel 82450KX/GX Memory" rev 0x05 at pci0 dev 20 function 0 not configured
pchb0 at pci0 dev 25 function 0 "Intel 82450KX/GX" rev 0x06: Compatibility PB 
(bus 0)
pchb1 at pci0 dev 26 function 0 "Intel 82450KX/GX" rev 0x06: Auxiliary PB (bus 
1)

pci1 at pchb1 bus 1
vendor "Siemens AG / Siemens Nixdorf AG", unknown product 0x6 (class undefined 
unknown subclass 0x00, rev 0x10) at pci1 dev 1 function 0 not configured
rl0 at pci1 dev 10 function 0 "Realtek 8129" rev 0x00: apic 5 int 2 (irq 15) 
address 00:a0:d2:04:5e:98
rlphy0 at rl0 phy 1: RTL internal phy
vendor "Olicom", unknown product 0x1 (class network subclass token ring, rev 
0x03) at pci1 dev 11 function 0 not configured
eisa0 at mainbus0
eisa0: can't map I/O space for slot 15
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
aic0 at isa0 port 0x340/32 irq 11
scsibus0 at aic0: 8 targets
cd0 at scsibus0 targ 5 lun 0: <NEC, CD-ROM DRIVE:463, 1.15> SCSI2 5/cdrom 
removable
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLlct20 10>
wd0: 8-sector PIO, LBA, 9787MB, 20044080 sectors
wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
"Adaptec AHA-1510B, ADP1510, ADP1530, SCSI Controller" at isapnp0 port 
0x140/32 irq 11 not configured
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
cpu1: starting
cpu1: CPU at apid 0 running
cpu2: starting
cpu2: CPU at apid 1 running
cpu3: starting
cpu3: CPU at apid 2 running

------------------------------------------------

Tomorow i try :)

TNX


-- 

FabioFVZ

for($i=0;$i<2;$i++){for($j=30; $j<38; $j++){push @b,"\e[$i;${j}m#";}}
for($y=29;print("\n"),$C=$y*0.1-1.5,$y--;){for($x=0;$c=$x*0.04-2,$z=0
,$Z=0,$x++<75;){for($k=0;$t=$z**2-$Z**2+$c,$Z=2*$z*$Z+$C,$z=$t,$k<112
;$k++){last if($z**2+$Z**2 >10);} print($b[$k%16]);}}print "\e[0m\n";