failed smp machine

hi.  this is for the people working on smp, but since it's a dmesg i haven't
sent before, i'm sending it to dmesg@ as well.

the following is from my dual 200mhz box, booing generic.mp.  it has an old
asus p55t2p4d board.

the smp support itself works just fine (yay), seems both processors are being
used.  i can run a make -j8 and it holds up alright, and both processors warm
up, so i figure they're working.

however, the network card fails (that watchdog timeout reappears if i try to
ifconfig the device again.).  it functions normally when booted from generic
using a single processor, so it seems it's an smp problem of some kind.

the exact same thing happened when i tried netbsd netbsd with smp a while
back. (exact same watchdog timeout and the rl driver just fails.)

i have also tried an pci ne2000 adaptor.  it produces a similar error.

let me know what the deal is, if there is any more information i can provide,
or anything else i can do.  i would like to see thse problems resolved, but i
understand it's a pretty weird old motherboard...

-steve haslin
[email protected] [email protected] http://resfilter.net

------

OpenBSD 3.5-current (GENERIC.MP) #47: Mon Jun 28 15:26:28 MDT 2004
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 199 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,MMX
: F00F bug workaround installed
real mem  = 66691072 (65128K)
avail mem = 53321728 (52072K)
using 839 buffers containing 3436544 bytes (3356K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(19) BIOS, date 05/18/98, BIOS32 rev. 0 @ 0xfb590
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x654
pcibios0: PCI BIOS has 5 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
mainbus0: Intel MP Specification (Version 1.1) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 66 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel Dual Pentium/MMX ("GenuineIntel" 586-class) 199 MHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,MMX
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type EISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439HX" rev 0x03
"Intel 82375EB EISA" rev 0x05 at pci0 dev 7 function 0 not configured
rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 2 int 11 (irq 11)
address 00:06:7b:08:48:dc
rlphy0 at rl0 phy 0: RTL internal phy
vga1 at pci0 dev 11 function 0 "ATI Mach64 VT" rev 0x40
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 13 function 0 "CMD Technology PCI0646" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct08 04>
wd0: 16-sector PIO, LBA, 4110MB, 8418816 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <, CD-916E, 11A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
eisa0 at mainbus0
eisa0: can't map I/O space for slot 14
eisa0: can't map I/O space for slot 15
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
rl0: watchdog timeout