gdt and smp = bug

Hi.

 I have machine - on Intel 7500VW2 with 2 Xeon. And I have
Intel SRCZCR RAID controller there.
 So, with uniprocessor kernel it's recognized and work fine.

 With multiprocessor kernel (earlier, without changes) loading goes
until
pctr: user-level cycle counter enabled
sd0(gdt0:0:0): timed out
sd0(gdt0:0:0): timed out
sd0(gdt0:0:0): timed out
...
I'm a little despair... But here is dmesg from uniproc, maybe it helps
somewhat. And I will be glad if someone explain this...

OpenBSD 3.9 (GENERIC) #617: Thu Mar  2 02:26:48 MST 2006
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) XEON(TM) CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem  = 2146983936 (2096664K)
avail mem = 1952976896 (1907204K)
using 4278 buffers containing 107450368 bytes (104932K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/13/02, BIOS32 rev. 0 @ 0xfdb64
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3070/336 (19 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CA LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5200! 0xcd800/0x1000 0xce800/0x1800 
0xd0000/0x1800 0xdd000/0x1000
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca2/2 spacing 1 irq 0
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7500 MCH Host" rev 0x03
"Intel E7500 DRAM" rev 0x03 at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 3 function 0 "Intel E7500 MCH" rev 0x03
pci1 at ppb0 bus 1
"Intel 82870P2 IOxAPIC" rev 0x03 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
gdt0 at pci2 dev 8 function 0 "Intel GDT RAID" rev 0x00: irq 9 dpmem fa000000 
2-bus 1 cache device
gdt0: ver 222, cache on, strategy 2, writeback on, blksz 32
gdt0: raw feat 1 cache feat 101
scsibus0 at gdt0: 35 targets
sd0 at scsibus0 targ 0 lun 0: <ICP, Host drive #00, > SCSI2 0/direct fixed
sd0: 34961MB, 34961 cyl, 64 head, 32 sec, 512 bytes/sec, 71601705 sec total
scsibus1 at gdt0: 16 targets
scsibus2 at gdt0: 16 targets
"Intel 82870P2 IOxAPIC" rev 0x03 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 PCI-PCI" rev 0x03
pci3 at ppb2 bus 3
em0 at pci3 dev 7 function 0 "Intel PRO/1000MT (82546EB)" rev 0x01: irq 9, 
address 00:07:e9:05:75:ae
em1 at pci3 dev 7 function 1 "Intel PRO/1000MT (82546EB)" rev 0x01: irq 9, 
address 00:07:e9:05:75:af
fxp0 at pci3 dev 8 function 0 "Intel 8255x" rev 0x08, i82559: irq 9, address 
00:02:b3:3a:42:36
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"Intel E7500 MCH" rev 0x03 at pci0 dev 3 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci4 at ppb3 bus 4
vga1 at pci4 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N101> SCSI0 5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: irq 11
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffe5 netmask ffe5 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
WARNING: / was not properly unmounted




-- 
Yakshin Andrey
Spylog