Re: I appear to have killed my T1000 by upgrading to the April 25th snap
Jonathan Gray <[email protected]>
| Newsgroups | gmane.os.openbsd.sparc |
|---|---|
| Message-ID | <[email protected]> |
The installer will move bsd to bsd.sp and bsd.mp to bsd
if it detects multiple cpus. Try setting the prom to boot bsd
instead of bsd.mp.
On Wed, Apr 29, 2009 at 11:31:16AM +0100, Dave Wilson wrote:
> As subject really, I've pasted everything I have in my console buffer
> below, but the significant bit is:
>
> {0} ok boot
> Boot device: disk File and args: bsd.mp
> OpenBSD IEEE 1275 Bootblock 1.1
> ..>> OpenBSD BOOT 1.3
> open /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0:a/bsd.mp: No such file or
> directory
>
> Boot:
>
>
> I can't easily work out where the command set for this prompt are, but I
> fear I'm a bit stuffed. I had just upgraded to the April 25th snapshot,
> and all appeared to have gone okay...
>
> Anyone got any ideas? I don't think I've done anything dumb, it was just
> a standard upgrade, like I've done so many times on this box in the hope
> of greater stability. Even some docs for the boot block would be good,
> so far I've only managed to find the source, and my forth is even worse
> than my C :-(
>
> Dave W
>
>
> (I know I've gone a bit overboard on how far back I copied from, but
> more information is always good, or so they tell me...)
>
> slash:/# ftp ftp://ftp.openbsd.org/pub/OpenBSD/snapshots/sparc64/bsd.rd
> Connected to openbsd.sunsite.ualberta.ca.
> 220 openbsd.srv.ualberta.ca FTP server ready.
> 331 Guest login ok, send your email address as password.
> 230- Welcome to ftp.openbsd.org at the University of Alberta
> 230- in Edmonton, Alberta, Canada.
> 230- For other mirror sites visit http://www.openbsd.org/ftp.html
> 230-
> 230- _____ ____ _____ _____
> 230- / ___ \ | _ \ / ____| __ \
> 230- / / / /___ ___ ____ | |_) | (___ | | | |
> 230- / / / / __ \/ _ \/ __ \| _ < \___ \| | | |
> 230- / /__/ / /_/ / __/ / / /| |_) |____) | |__| |
> 230- \_____/ .___/\___/_/ /_/ |____/|_____/|_____/
> 230- /_/
> 230- | . The proactively secure Unix-like
> 230- . |L /| . Operating System.
> 230- _ . |\ _| \--+._/| . Please visit the OpenBSD web site
> 230- / ||\| Y J ) / |/| ./ at http://www.openbsd.org/
> 230- J |)'( | ` F`.'/
> 230- -<| F __ .-< All transfers are logged, if you
> don't
> 230- | / .-'. `. /-. L___ like this policy, disconnect now!
> 230- J \ < \ | | O\|.-'
> 230- _J \ .- \/ O | | \ |F
> 230- '-F -<_. \ .-' `-' L__ OpenBSD 4.4 is available for order!
> 230- __J _ _. >-' )._. |-' You can order a CD of OpenBSD 4.4
> 230- `-|.' /_. \_| F from
> http://www.openbsd.org/orders.html.
> 230- /.- . _.< CD sales are important to support the
> 230- /' /.' .' `\ continued development of the
> project.
> 230- /L /' |/ _.-'-\
> 230- /'J ___.---'\|
> 230- |\ .--' V | `. `
> 230- |/`. `-. `._)
> 230- / .-.\
> 230- VK \ ( `\
> 230- `.\
> 230-
> 230- *DO NOT* mirror openbsd from this site! use one of the
> 230- "second level mirrors" listed at http://www.openbsd.org/ftp.html
> 230- instead of this site. If you mirror from this site you will lose
> 230- access to it.
> 230-
> 230- E-mail comments, questions, trouble reports, and complaints
> 230- to [email protected]. Please drive safely.
> 230-
> 230 Guest login ok, access restrictions apply.
> Remote system type is UNIX.
> Using binary mode to transfer files.
> 200 Type set to I.
> 250 CWD command successful.
> Retrieving pub/OpenBSD/snapshots/sparc64/bsd.rd
> local: bsd.rd remote: bsd.rd
> 150 Opening BINARY mode data connection for 'bsd.rd' (2329017 bytes).
> 100% |**************************************************| 2274 KB 00:25
> 226 Transfer complete.
> 2329017 bytes received in 26.20 seconds (86.83 KB/s)
> 221 Goodbye.
> slash:/# halt
> /etc/rc.shutdown in progress...
> /etc/rc.shutdown complete.
> syncing disks... done
> halted
>
> Program terminated
> {0} ok boot bsd.rd
>
> SC Alert: Host System has Reset
>
> SC Alert: Host system has shut down.
> cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu
> cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu Device: pci
> /pci@780: Device 0 Nothing there
> Device: pci
> /pci@7c0: Device 0 pci
> /pci@7c0/pci@0: Device 0 Nothing there
> /pci@7c0/pci@0: Device 1 Nothing there
> /pci@7c0/pci@0: Device 2 Nothing there
> /pci@7c0/pci@0: Device 3 Nothing there
> /pci@7c0/pci@0: Device 4 network network
> /pci@7c0/pci@0: Device 5 Nothing there
> /pci@7c0/pci@0: Device 6 Nothing there
> /pci@7c0/pci@0: Device 7 Nothing there
> /pci@7c0/pci@0: Device 8 pci
> /pci@7c0/pci@0/pci@8: Device 0 Nothing there
> /pci@7c0/pci@0/pci@8: Device 1 network network
> /pci@7c0/pci@0/pci@8: Device 2 scsi tape disk
> /pci@7c0/pci@0/pci@8: Device 3 Nothing there
> /pci@7c0/pci@0/pci@8: Device 4 Nothing there
> /pci@7c0/pci@0/pci@8: Device 5 Nothing there
> /pci@7c0/pci@0/pci@8: Device 6 Nothing there
> /pci@7c0/pci@0/pci@8: Device 7 Nothing there
> /pci@7c0/pci@0/pci@8: Device 8 Nothing there
> /pci@7c0/pci@0/pci@8: Device 9 Nothing there
> /pci@7c0/pci@0/pci@8: Device a Nothing there
> /pci@7c0/pci@0/pci@8: Device b Nothing there
> /pci@7c0/pci@0/pci@8: Device c Nothing there
> /pci@7c0/pci@0/pci@8: Device d Nothing there
> /pci@7c0/pci@0/pci@8: Device e Nothing there
> /pci@7c0/pci@0/pci@8: Device f Nothing there
> /pci@7c0/pci@0/pci@8: Device 10 Nothing there
> /pci@7c0/pci@0/pci@8: Device 11 Nothing there
> /pci@7c0/pci@0/pci@8: Device 12 Nothing there
> /pci@7c0/pci@0/pci@8: Device 13 Nothing there
> /pci@7c0/pci@0/pci@8: Device 14 Nothing there
> /pci@7c0/pci@0/pci@8: Device 15 Nothing there
> /pci@7c0/pci@0/pci@8: Device 16 Nothing there
> /pci@7c0/pci@0/pci@8: Device 17 Nothing there
> /pci@7c0/pci@0/pci@8: Device 18 Nothing there
> /pci@7c0/pci@0/pci@8: Device 19 Nothing there
> /pci@7c0/pci@0/pci@8: Device 1a Nothing there
> /pci@7c0/pci@0/pci@8: Device 1b Nothing there
> /pci@7c0/pci@0/pci@8: Device 1c Nothing there
> /pci@7c0/pci@0/pci@8: Device 1d Nothing there
> /pci@7c0/pci@0/pci@8: Device 1e Nothing there
> /pci@7c0/pci@0/pci@8: Device 1f Nothing there
> /pci@7c0/pci@0: Device 9 Nothing there
> /pci@7c0/pci@0: Device a Nothing there
> /pci@7c0/pci@0: Device b Nothing there
> /pci@7c0/pci@0: Device c Nothing there
> /pci@7c0/pci@0: Device d Nothing there
> /pci@7c0/pci@0: Device e Nothing there
> /pci@7c0/pci@0: Device f Nothing there
> /pci@7c0/pci@0: Device 10 Nothing there
> /pci@7c0/pci@0: Device 11 Nothing there
> /pci@7c0/pci@0: Device 12 Nothing there
> /pci@7c0/pci@0: Device 13 Nothing there
> /pci@7c0/pci@0: Device 14 Nothing there
> /pci@7c0/pci@0: Device 15 Nothing there
> /pci@7c0/pci@0: Device 16 Nothing there
> /pci@7c0/pci@0: Device 17 Nothing there
> /pci@7c0/pci@0: Device 18 Nothing there
> /pci@7c0/pci@0: Device 19 Nothing there
> /pci@7c0/pci@0: Device 1a Nothing there
> /pci@7c0/pci@0: Device 1b Nothing there
> /pci@7c0/pci@0: Device 1c Nothing there
> /pci@7c0/pci@0: Device 1d Nothing there
> /pci@7c0/pci@0: Device 1e Nothing there
> /pci@7c0/pci@0: Device 1f Nothing there
> Device: ebus
> /ebus@800: serial
> Probing I/O buses
>
>
> Sun Fire(TM) T1000, No Keyboard
> Copyright 2005 Sun Microsystems, Inc. All rights reserved.
> OpenBoot 4.20.0, 16376 MB memory available, Serial #70055906.
> Ethernet address 0:14:4f:2c:f7:e2, Host ID: 842cf7e2.
>
>
>
> Rebooting with command: boot bsd.rd
> Boot device: /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0 File and args: bsd.rd
> OpenBSD IEEE 1275 Bootblock 1.1
> ..>> OpenBSD BOOT 1.3
> Booting /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0:a/bsd.rd
> 3395984@0x1000000+3696@0x133d190+3255064@0x1800000+939240@0x1b1ab18
> symbols @ 0xfefca240 65 start=0x1000000
> console is /virtual-devices@100/console@1
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2009 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
>
> OpenBSD 4.5-current (RAMDISK) #48: Sat Apr 25 23:33:01 MDT 2009
> [email protected]:/usr/src/sys/arch/sparc64/compile/RAMDISK
> real mem = 17171480576 (16376MB)
> avail mem = 16810041344 (16031MB)
> mainbus0 at root: Sun Fire(TM) T1000
> cpu0 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> "SUNW,UltraSPARC-T1" at mainbus0 not configured
> vbus0 at mainbus0
> "nvram" at vbus0 not configured
> "flashprom" at vbus0 not configured
> vcons0 at vbus0: ivec 0x111
> "ncp" at vbus0 not configured
> vrtc0 at vbus0
> "loop" at vbus0 not configured
> "loop" at vbus0 not configured
> "echo" at vbus0 not configured
> "fma" at vbus0 not configured
> "sunvts" at vbus0 not configured
> "sunmc" at vbus0 not configured
> "explorer" at vbus0 not configured
> "led" at vbus0 not configured
> vpci0 at mainbus0: bus 2 to 2, dvma map 80000000-ffffffff
> pci0 at vpci0
> vpci1 at mainbus0: bus 2 to 4, dvma map 80000000-ffffffff
> pci1 at vpci1
> ppb0 at pci1 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
> pci2 at ppb0 bus 3
> bge0 at pci2 dev 4 function 0 "Broadcom BCM5714" rev 0xa2, BCM5715 A1
> (0x9001): ivec 0x7d4, address 00:14:4f:2c:f7:e2
> brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> bge1 at pci2 dev 4 function 1 "Broadcom BCM5714" rev 0xa2, BCM5715 A1
> (0x9001): ivec 0x7d5, address 00:14:4f:2c:f7:e3
> brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> ppb1 at pci2 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb3
> pci3 at ppb1 bus 4
> bge2 at pci3 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
> (0x2100): ivec 0x7c2, address 00:14:4f:2c:f7:e4
> brgphy2 at bge2 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
> bge3 at pci3 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
> (0x2100): ivec 0x7c1, address 00:14:4f:2c:f7:e5
> brgphy3 at bge3 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
> mpi0 at pci3 dev 2 function 0 "Symbios Logic SAS1064" rev 0x02: ivec 0x7c0
> scsibus0 at mpi0: 63 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, ST31000340AS, SD1A> SCSI3 0/direct fixed
> sd0: 953869MB, 512 bytes/sec, 1953525168 sec total
> ebus0 at mainbus0
> com0 at ebus0 addr c2c000-c2c007 ivec 0xa: st16650, 32 byte fifo
> rd0: fixed, 6144 blocks
> bootpath: /pci@7c0,0/pci@0,0/pci@8,0/scsi@2,0/disk@0,0
> root on rd0a swap on rd0b dump on rd0b
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
> (I)nstall, (U)pgrade or (S)hell? U
>
> Welcome to the OpenBSD/sparc64 4.5 upgrade program.
>
> This program will help you upgrade OpenBSD. At any prompt except password
> prompts you can escape to a shell by typing '!'. Default answers are shown
> in []'s and are selected by pressing RETURN. At any time you can exit this
> program by pressing Control-C, but exiting during an upgrade can leave your
> system in an inconsistent state.
>
> Terminal type? [sun]
>
> IS YOUR DATA BACKED UP? As with anything that modifies disk contents, this
> program can cause SIGNIFICANT data loss.
>
> NOTE: once your system has been upgraded, you must manually merge any
> changes
> to files in the 'etc' set into the files already on your system.
>
> Proceed with upgrade? [no] yes
> Cool! Let's get to it.
> Available disks are: sd0.
> Which one is the root disk? (or 'done') [sd0]
> Root filesystem? [sd0a]
> Checking root filesystem (fsck -fp /dev/sd0a)...OK.
> Mounting root filesystem (mount -o ro /dev/sd0a /mnt)...OK.
> Do you want to do any manual network configuration? [no]
> Force checking of non-root filesystems? [yes]
> fsck -fp /dev/sd0g...OK.
> fsck -fp /dev/sd0e...OK.
> fsck -fp /dev/sd0f...OK.
> fsck -fp /dev/sd0h...OK.
> fsck -fp /dev/sd0i...OK.
> /dev/sd0a on /mnt type ffs (rw, local)
> /dev/sd0g on /mnt/home type ffs (rw, local, noatime, nosuid)
> /dev/sd0e on /mnt/tmp type ffs (rw, local, nodev, nosuid)
> /dev/sd0f on /mnt/usr type ffs (rw, local, nodev)
> /dev/sd0h on /mnt/var type ffs (rw, local, nodev, nosuid)
> /dev/sd0i on /mnt/var/www/htdocs type ffs (rw, local, noatime, nodev,
> noexec, nosuid)
>
> Let's upgrade the sets!
> Location of sets? (disk ftp http or 'done') [disk] ftp
> HTTP/FTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none]
> Display the list of known ftp servers? [no]
> Server? (IP address, hostname or 'done') ftp.openbsd.org
> Server directory? [pub/OpenBSD/4.5/sparc64] pub/OpenBSD/snapshots/sparc64
> Login? [anonymous]
>
> Select sets by entering a set name, a file name pattern or 'all'. De-select
> sets by prepending a '-' to the set name, file name pattern or 'all'.
> Selected
> sets are labelled '[X]'.
> [X] bsd [X] bsd.rd [X] bsd.mp
> [X] base45.tgz [X] misc45.tgz [X] comp45.tgz
> [X] man45.tgz [X] game45.tgz [ ] xbase45.tgz
> [ ] xshare45.tgz [ ] xfont45.tgz [ ] xserv45.tgz
> Set name? (or 'abort' or 'done') [xbase45.tgz] all
> [X] bsd [X] bsd.rd [X] bsd.mp
> [X] base45.tgz [X] misc45.tgz [X] comp45.tgz
> [X] man45.tgz [X] game45.tgz [X] xbase45.tgz
> [X] xshare45.tgz [X] xfont45.tgz [X] xserv45.tgz
> Set name? (or 'abort' or 'done') [done]
> bsd 100% |*************************************| 6491 KB 01:16
> bsd.rd 100% |*************************************| 2274 KB 00:26
> bsd.mp 100% |*************************************| 6504 KB 01:14
> base45.tgz 100% |*************************************| 51877 KB 10:12
> misc45.tgz 100% |*************************************| 2866 KB
> 00:00 ETA
> comp45.tgz 100% |*************************************| 100 MB 19:59
> man45.tgz 100% |*************************************| 8043 KB 01:32
> game45.tgz 100% |*************************************| 2716 KB
> 00:00 ETA
> xbase45.tgz 100% |*************************************| 10957 KB 02:07
> xshare45.tgz 100% |*************************************| 2773 KB
> 00:00 ETA
> xfont45.tgz 100% |*************************************| 34748 KB
> 00:00 ETA
> xserv45.tgz 100% |*************************************| 11316 KB 02:12
> Location of sets? (disk ftp http or 'done') [done]
> Making all device nodes...done.
> Multiprocessor machine; using bsd.mp instead of bsd.
> Installing boot block...
> proto: /mnt/usr/mdec/bootblk
> device: /dev/rsd0c
> Copying ofwboot...
>
> CONGRATULATIONS! Your OpenBSD upgrade has been successfully completed!
> To boot the new system, enter "reboot" or "halt" at the command prompt.
> When you login to your new system the first time, please read your mail
> using the "mail" command.
> # halt
> syncing disks... done
> halted
>
> Program terminated
> {0} ok boot
>
> SC Alert: Host System has Reset
>
> SC Alert: Host system has shut down.
> cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu
> cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu Device: pci
> /pci@780: Device 0 Nothing there
> Device: pci
> /pci@7c0: Device 0 pci
> /pci@7c0/pci@0: Device 0 Nothing there
> /pci@7c0/pci@0: Device 1 Nothing there
> /pci@7c0/pci@0: Device 2 Nothing there
> /pci@7c0/pci@0: Device 3 Nothing there
> /pci@7c0/pci@0: Device 4 network network
> /pci@7c0/pci@0: Device 5 Nothing there
> /pci@7c0/pci@0: Device 6 Nothing there
> /pci@7c0/pci@0: Device 7 Nothing there
> /pci@7c0/pci@0: Device 8 pci
> /pci@7c0/pci@0/pci@8: Device 0 Nothing there
> /pci@7c0/pci@0/pci@8: Device 1 network network
> /pci@7c0/pci@0/pci@8: Device 2 scsi tape disk
> /pci@7c0/pci@0/pci@8: Device 3 Nothing there
> /pci@7c0/pci@0/pci@8: Device 4 Nothing there
> /pci@7c0/pci@0/pci@8: Device 5 Nothing there
> /pci@7c0/pci@0/pci@8: Device 6 Nothing there
> /pci@7c0/pci@0/pci@8: Device 7 Nothing there
> /pci@7c0/pci@0/pci@8: Device 8 Nothing there
> /pci@7c0/pci@0/pci@8: Device 9 Nothing there
> /pci@7c0/pci@0/pci@8: Device a Nothing there
> /pci@7c0/pci@0/pci@8: Device b Nothing there
> /pci@7c0/pci@0/pci@8: Device c Nothing there
> /pci@7c0/pci@0/pci@8: Device d Nothing there
> /pci@7c0/pci@0/pci@8: Device e Nothing there
> /pci@7c0/pci@0/pci@8: Device f Nothing there
> /pci@7c0/pci@0/pci@8: Device 10 Nothing there
> /pci@7c0/pci@0/pci@8: Device 11 Nothing there
> /pci@7c0/pci@0/pci@8: Device 12 Nothing there
> /pci@7c0/pci@0/pci@8: Device 13 Nothing there
> /pci@7c0/pci@0/pci@8: Device 14 Nothing there
> /pci@7c0/pci@0/pci@8: Device 15 Nothing there
> /pci@7c0/pci@0/pci@8: Device 16 Nothing there
> /pci@7c0/pci@0/pci@8: Device 17 Nothing there
> /pci@7c0/pci@0/pci@8: Device 18 Nothing there
> /pci@7c0/pci@0/pci@8: Device 19 Nothing there
> /pci@7c0/pci@0/pci@8: Device 1a Nothing there
> /pci@7c0/pci@0/pci@8: Device 1b Nothing there
> /pci@7c0/pci@0/pci@8: Device 1c Nothing there
> /pci@7c0/pci@0/pci@8: Device 1d Nothing there
> /pci@7c0/pci@0/pci@8: Device 1e Nothing there
> /pci@7c0/pci@0/pci@8: Device 1f Nothing there
> /pci@7c0/pci@0: Device 9 Nothing there
> /pci@7c0/pci@0: Device a Nothing there
> /pci@7c0/pci@0: Device b Nothing there
> /pci@7c0/pci@0: Device c Nothing there
> /pci@7c0/pci@0: Device d Nothing there
> /pci@7c0/pci@0: Device e Nothing there
> /pci@7c0/pci@0: Device f Nothing there
> /pci@7c0/pci@0: Device 10 Nothing there
> /pci@7c0/pci@0: Device 11 Nothing there
> /pci@7c0/pci@0: Device 12 Nothing there
> /pci@7c0/pci@0: Device 13 Nothing there
> /pci@7c0/pci@0: Device 14 Nothing there
> /pci@7c0/pci@0: Device 15 Nothing there
> /pci@7c0/pci@0: Device 16 Nothing there
> /pci@7c0/pci@0: Device 17 Nothing there
> /pci@7c0/pci@0: Device 18 Nothing there
> /pci@7c0/pci@0: Device 19 Nothing there
> /pci@7c0/pci@0: Device 1a Nothing there
> /pci@7c0/pci@0: Device 1b Nothing there
> /pci@7c0/pci@0: Device 1c Nothing there
> /pci@7c0/pci@0: Device 1d Nothing there
> /pci@7c0/pci@0: Device 1e Nothing there
> /pci@7c0/pci@0: Device 1f Nothing there
> Device: ebus
> /ebus@800: serial
> Probing I/O buses
>
>
> Sun Fire(TM) T1000, No Keyboard
> Copyright 2005 Sun Microsystems, Inc. All rights reserved.
> OpenBoot 4.20.0, 16376 MB memory available, Serial #70055906.
> Ethernet address 0:14:4f:2c:f7:e2, Host ID: 842cf7e2.
>
>
>
> Rebooting with command: boot
> Boot device: disk File and args: bsd.mp
> OpenBSD IEEE 1275 Bootblock 1.1
> ..>> OpenBSD BOOT 1.3
> open /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0:a/bsd.mp: No such file or
> directory
>
> Boot:
>
> Boot: boot bsd
> boot options string <bsd> must start with -
> Boot: boot bsd.rd
> boot options string <bsd.rd> must start with -
> Boot: help boot
> boot options string <boot> must start with -
> Boot: sc>
> sc> reset -c
> Are you sure you want to reset the system [y/n]? y
> Enter #. to return to ALOM.
>
> SC Alert: SC Request to Reset Host.
>
> SC Alert: Host System has Reset
>
> SC Alert: Host system has shut down.
> cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu
> cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu Device: pci
> /pci@780: Device 0 Nothing there
> Device: pci
> /pci@7c0: Device 0 pci
> /pci@7c0/pci@0: Device 0 Nothing there
> /pci@7c0/pci@0: Device 1 Nothing there
> /pci@7c0/pci@0: Device 2 Nothing there
> /pci@7c0/pci@0: Device 3 Nothing there
> /pci@7c0/pci@0: Device 4 network network
> /pci@7c0/pci@0: Device 5 Nothing there
> /pci@7c0/pci@0: Device 6 Nothing there
> /pci@7c0/pci@0: Device 7 Nothing there
> /pci@7c0/pci@0: Device 8 pci
> /pci@7c0/pci@0/pci@8: Device 0 Nothing there
> /pci@7c0/pci@0/pci@8: Device 1 network network
> /pci@7c0/pci@0/pci@8: Device 2 scsi tape disk
> /pci@7c0/pci@0/pci@8: Device 3 Nothing there
> /pci@7c0/pci@0/pci@8: Device 4 Nothing there
> /pci@7c0/pci@0/pci@8: Device 5 Nothing there
> /pci@7c0/pci@0/pci@8: Device 6 Nothing there
> /pci@7c0/pci@0/pci@8: Device 7 Nothing there
> /pci@7c0/pci@0/pci@8: Device 8 Nothing there
> /pci@7c0/pci@0/pci@8: Device 9 Nothing there
> /pci@7c0/pci@0/pci@8: Device a Nothing there
> /pci@7c0/pci@0/pci@8: Device b Nothing there
> /pci@7c0/pci@0/pci@8: Device c Nothing there
> /pci@7c0/pci@0/pci@8: Device d Nothing there
> /pci@7c0/pci@0/pci@8: Device e Nothing there
> /pci@7c0/pci@0/pci@8: Device f Nothing there
> /pci@7c0/pci@0/pci@8: Device 10 Nothing there
> /pci@7c0/pci@0/pci@8: Device 11 Nothing there
> /pci@7c0/pci@0/pci@8: Device 12 Nothing there
> /pci@7c0/pci@0/pci@8: Device 13 Nothing there
> /pci@7c0/pci@0/pci@8: Device 14 Nothing there
> /pci@7c0/pci@0/pci@8: Device 15 Nothing there
> /pci@7c0/pci@0/pci@8: Device 16 Nothing there
> /pci@7c0/pci@0/pci@8: Device 17 Nothing there
> /pci@7c0/pci@0/pci@8: Device 18 Nothing there
> /pci@7c0/pci@0/pci@8: Device 19 Nothing there
> /pci@7c0/pci@0/pci@8: Device 1a Nothing there
> /pci@7c0/pci@0/pci@8: Device 1b Nothing there
> /pci@7c0/pci@0/pci@8: Device 1c Nothing there
> /pci@7c0/pci@0/pci@8: Device 1d Nothing there
> /pci@7c0/pci@0/pci@8: Device 1e Nothing there
> /pci@7c0/pci@0/pci@8: Device 1f Nothing there
> /pci@7c0/pci@0: Device 9 Nothing there
> /pci@7c0/pci@0: Device a Nothing there
> /pci@7c0/pci@0: Device b Nothing there
> /pci@7c0/pci@0: Device c Nothing there
> /pci@7c0/pci@0: Device d Nothing there
> /pci@7c0/pci@0: Device e Nothing there
> /pci@7c0/pci@0: Device f Nothing there
> /pci@7c0/pci@0: Device 10 Nothing there
> /pci@7c0/pci@0: Device 11 Nothing there
> /pci@7c0/pci@0: Device 12 Nothing there
> /pci@7c0/pci@0: Device 13 Nothing there
> /pci@7c0/pci@0: Device 14 Nothing there
> /pci@7c0/pci@0: Device 15 Nothing there
> /pci@7c0/pci@0: Device 16 Nothing there
> /pci@7c0/pci@0: Device 17 Nothing there
> /pci@7c0/pci@0: Device 18 Nothing there
> /pci@7c0/pci@0: Device 19 Nothing there
> /pci@7c0/pci@0: Device 1a Nothing there
> /pci@7c0/pci@0: Device 1b Nothing there
> /pci@7c0/pci@0: Device 1c Nothing there
> /pci@7c0/pci@0: Device 1d Nothing there
> /pci@7c0/pci@0: Device 1e Nothing there
> /pci@7c0/pci@0: Device 1f Nothing there
> Device: ebus
> /ebus@800: serial
> Probing I/O buses
>
>
> Sun Fire(TM) T1000, No Keyboard
> Copyright 2005 Sun Microsystems, Inc. All rights reserved.
> OpenBoot 4.20.0, 16376 MB memory available, Serial #70055906.
> Ethernet address 0:14:4f:2c:f7:e2, Host ID: 842cf7e2.
>
>
>
> {0} ok boot
> Boot device: disk File and args: bsd.mp
> OpenBSD IEEE 1275 Bootblock 1.1
> ..>> OpenBSD BOOT 1.3
> open /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0:a/bsd.mp: No such file or
> directory
>
> Boot: