sparc64 panic 4.7-current (GENERIC.MP) #346: Tue Apr 27 snapshot

Hiya!

I have repeatable panics on a Sun Ultra 60 with the April 27th snapshot.
I can replicate it with rsync'ing a few tens of gigabytes.   I do not think
the disk is bad,
but maybe I am wrong.

This ultra 60 has 2 cpus and a 6 disk scsi multipack, running the sparc64
bsd.mp snapshots.
sd2 is in the multipack, but i've also seen it on sd1, which is inside the
ultra60.

======
sd2(siop1:9:0): timeout on SCSI command 0x2a
siop1: scsi bus reset
sd2(siop1:9:0): cmd 0x40002113ce0 (tag 1) added to reset list
sd2(siop1:9:0): cmd 0x40002113980 (tag 2) added to reset list
sd2(siop1:9:0): cmd 0x400020b6ce0 (tag 3) added to reset list
sd2(siop1:9:0): cmd 0x40002113780 (tag 4) added to reset list
sd2(siop1:9:0): cmd 0x400020b6240 (tag 5) added to reset list
sd2(siop1:9:0): cmd 0x40002113aa0 (tag 6) added to reset list
sd2(siop1:9:0): cmd 0x40002143e00 (tag 7) added to reset list
sd2(siop1:9:0): cmd 0x400020e7d40 (tag 8) added to reset list
siop1: target 9 now using tagged 8 bit async xfers
siop1: target 10 now using tagged 8 bit async xfers
siop1: target 11 now using tagged 8 bit async xfers
siop1: target 12 now using tagged 8 bit async xfers
siop1: target 13 now using tagged 8 bit async xfers
sd2(siop1:9:0): cmd 0x40002113ce0 (status 2) reset with status 6, xs->error 4
panic: siop: non-ready cmd in ready list
kdb breakpoint at 144d080
Stopped at      Debugger+0x4:   nop
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO.
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb{0}> trace
siop_start(400020cd000, 5, ff00, 0, 1, 0) at siop_start+0x47c
siop_scsicmd(4000c042000, fe050000, 4000, 4000c044060, 4000, 0) at
siop_scsicmd
+0x214
scsi_xs_exec(4000c042000, 4000, 4000211b000, 0, 6, 8) at scsi_xs_exec+0x20
scsi_done(4000c042000, 6, 4, 9, 0, ffffffffffffffff) at scsi_done+0x14
siop_handle_reset(400020cd000, 2a, 400020cd024, 9, 10, 400020cd078) at
siop_han
dle_reset+0x230
siop_timeout(40002113ce0, cc6f773952c, 8, 2, 40002087720, 4000c042098) at
siop_
timeout+0x68
softclock(1800, 0, e0017ec8, 0, 118a480, 0) at softclock+0x330
sparc_interrupt(188b7f0, 1c14000, 15207c0, 18871a8, 0, 0) at
sparc_interrupt+0x
2a8
sched_idle(1c14000, 4000c03c480, ffffffffffffffff, 4000a4389b5, 0,
4000c042085)
 at sched_idle+0x1d8
proc_trampoline(0, 0, 0, 0, 0, 0) at proc_trampoline+0x14
ddb{0}> ps
   PID   PPID   PGRP    UID  S       FLAGS  WAIT          COMMAND
 27162  30101  27162      0  3   0x2004002  biowait       rm
 12034  10598  24835   1000  3   0x2044180  piperd        sendmail
  2438      1   2438      0  3   0x2040180  select        sendmail
 28905  29660  15839   1000  3   0x2004080  select        ssh
 29660  19535  15839   1000  3   0x2004080  pause         autossh
 30101      1  30101      0  3   0x2004082  ttyin         ksh
 19535  15839  15839   1000  3   0x2004080  pause         sh
 15839  10598  15839   1000  3   0x2004080  pause         sh
 10598  24835  24835      0  3   0x2000080  piperd        cron
 24835      1  24835      0  3   0x2000080  select        cron
  5514      1   5514      0  3   0x2000180  select        inetd
 19952      1  19952      0  3   0x2000080  select        sshd
  7684   7212   7212     74  3   0x2000180  bpf           pflogd
  7212      1   7212      0  3   0x2000080  netio         pflogd
 18355  20282  20282     73  2   0x2000180                syslogd
 20282      1  20282      0  3   0x2000088  netio         syslogd
  2191      1   2191     77  3   0x2000180  poll          dhclient
 16605      1    913      0  3   0x2000082  poll          dhclient
    12      0      0      0  3   0x2100200  bored         crypto
    11      0      0      0  3   0x2100200  aiodoned      aiodoned
    10      0      0      0  3   0x2100200  syncer        update
     9      0      0      0  3   0x2100200  cleaner       cleaner
     8      0      0      0  3    0x100200  reaper        reaper
     7      0      0      0  3   0x2100200  pgdaemon      pagedaemon
     6      0      0      0  3   0x2100200  pftm          pfpurge
     5      0      0      0  7  0x40100200                idle1
     4      0      0      0  3   0x2100200  bored         syswq
*    3      0      0      0  7  0x40100200                idle0
     2      0      0      0  3   0x2100200  kmalloc       kmthread
     1      0      1      0  3   0x2004080  wait          init
     0     -1      0      0  3   0x2080200  scheduler     swapper
ddb{0}>


ddb{0}> continue
sd2(siop1:9:0): timeout on SCSI command 0x2a
siop1: scsi bus reset
siop1: target 9 now using tagged 8 bit async xfers
siop1: target 10 now using tagged 8 bit async xfers
siop1: target 11 now using tagged 8 bit async xfers
siop1: target 12 now using tagged 8 bit async xfers
siop1: target 13 now using tagged 8 bit async xfers
sd2(siop1:9:0): cmd 0x40002113ce0 added to reset list from ready list
sd2(siop1:9:0): cmd 0x40002113ce0 (status 6) reset with status 6, xs->error 8
sd2(siop1:9:0): timeout on SCSI command 0x2a
siop1: scsi bus reset
siop1: target 9 now using tagged 8 bit async xfers
siop1: target 10 now using tagged 8 bit async xfers
siop1: target 11 now using tagged 8 bit async xfers
siop1: target 12 now using tagged 8 bit async xfers
siop1: target 13 now using tagged 8 bit async xfers
sd2(siop1:9:0): timeout on SCSI command 0x2a
siop1: scsi bus reset
siop1: target 9 now using tagged 8 bit async xfers
siop1: target 10 now using tagged 8 bit async xfers
siop1: target 11 now using tagged 8 bit async xfers
siop1: target 12 now using tagged 8 bit async xfers
siop1: target 13 now using tagged 8 bit async xfers
sd2(siop1:9:0): timeout on SCSI command 0x2a
siop1: scsi bus reset
siop1: target 9 now using tagged 8 bit async xfers
siop1: target 10 now using tagged 8 bit async xfers
siop1: target 11 now using tagged 8 bit async xfers
siop1: target 12 now using tagged 8 bit async xfers
siop1: target 13 now using tagged 8 bit async xfers
sd2(siop1:9:0): timeout on SCSI command 0x2a
siop1: scsi bus reset
sd2(siop1:9:0): timeout on SCSI command 0x2a
siop1: scsi bus reset
siop1: target 9 now using tagged 8 bit async xfers
siop1: target 10 now using tagged 8 bit async xfers
siop1: target 11 now using tagged 8 bit async xfers
siop1: target 12 now using tagged 8 bit async xfers
siop1: target 13 now using tagged 8 bit async xfers
syncing disks... 9 9 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 giving up
Frame pointer is at 0xe0016e79
Call traceback:
1440208(a, 101, 144d080, 800006, 0, 1800, e0016f39) fp = e0016f39
11952b0(100, e0017940, 14eda28, e0017940, 184, a, e0016ff9) fp = e0016ff9
105a17c(14eda28, 100, 1892000, e0017940, 184, 5, e00170b9) fp = e00170b9
1059a54(400020cd000, 5, ff00, 0, 1, 0, e0017179) fp = e0017179
1451760(4000c042000, fe050000, 4000, 4000c044060, 4000, 0, e0017249) fp =
e0017249
1451794(4000c042000, 4000, 4000211b000, 0, 6, 8, e0017309) fp = e0017309
10595f0(4000c042000, 6, 4, 9, 0, ffffffffffffffff, e00173c9) fp = e00173c9
105a288(400020cd000, 2a, 400020cd024, 9, 10, 400020cd078, e0017499) fp =
e0017499
118a7b0(40002113ce0, cc6f773952c, 8, 2, 40002087720, 4000c042098, e0017559) fp
= e0017559
1012244(1800, 0, e0017ec8, 0, 118a480, 0, e0017619) fp = e0017619
117e2f8(188b7f0, 1c14000, 15207c0, 18871a8, 0, 0, 4001a5b5551) fp =
4001a5b5551

dump to dev 7,1 not possible
siop1: target 9 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
rebooting

Resetting ...





Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.7-current (GENERIC.MP) #346: Tue Apr 27 03:32:22 MDT 2010
    [email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 2147483648 (2048MB)
avail mem = 2068152320 (1972MB)
mainbus0 at root: Sun Ultra 60 UPA/PCI (2 X UltraSPARC-II 360MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-II (rev 2.0) @ 359.992 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64
b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-II (rev 2.0) @ 359.992 MHz
cpu1: physical 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64
b/l)
psycho0 at mainbus0 addr 0xfffb4000: SUNW,psycho, impl 0, version 4, ign 7c0
psycho0: bus range 0-0, PCI bus 0
psycho0: dvma map fe000000-ffffffff, STC0 enabled
pci0 at psycho0
ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003
"SUNW,pll" at ebus0 addr 504000-504002 not configured
uperf0 at ebus0 addr 500000-500007: model SUNW,sc-qp (0/1) ports 9
sab0 at ebus0 addr 400000-40007f ivec 0x2b: rev 3.2
sabtty0 at sab0 port 0: console
sabtty1 at sab0 port 1
comkbd0 at ebus0 addr 3083f8-3083ff ivec 0x29: no keyboard
comms0 at ebus0 addr 3062f8-3062ff ivec 0x2a
wsmouse0 at comms0 mux 0
lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ivec 0x22:
polled
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ivec 0x23 ivec 0x24: nvaddrs 0
audio0 at audioce0
hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address
08:xx:xx:xx:xx:xx
qsphy0 at hme0 phy 1: QS6612 10/100 PHY, rev. 1
siop0 at pci0 dev 3 function 0 "Symbios Logic 53c875" rev 0x14: ivec 0x7e0,
using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3147NC, 4201> SCSI3 0/direct fixed
sd0: 140272MB, 512 bytes/sec, 287277984 sec total
sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3147NC, 0109> SCSI3 0/direct fixed
sd1: 140272MB, 512 bytes/sec, 287277984 sec total
probe(siop0:6:0): Check Condition (error 0x70) on opcode 0x0
    SENSE KEY: Media Error
     ASC/ASCQ: Unable To Recover Table-Of-Contents
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, XM5701TASUN12XCD, 0997> SCSI2 5/cdrom
removable
siop1 at pci0 dev 3 function 1 "Symbios Logic 53c875" rev 0x14: ivec 0x7e6,
using 4K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
sd2 at scsibus1 targ 9 lun 0: <FUJITSU, MAN3735MC, 0111> SCSI3 0/direct fixed
sd2: 70092MB, 512 bytes/sec, 143550456 sec total
sd3 at scsibus1 targ 10 lun 0: <FUJITSU, MAP3735NC, 0108> SCSI3 0/direct
fixed
sd3: 70103MB, 512 bytes/sec, 143571316 sec total
sd4 at scsibus1 targ 11 lun 0: <FUJITSU, MAB3091S SUN9.0G, 1705> SCSI2
0/direct fixed
sd4: 8637MB, 512 bytes/sec, 17689267 sec total
sd5 at scsibus1 targ 12 lun 0: <FUJITSU, MAT3147NC, 4201> SCSI3 0/direct
fixed
sd5: 140272MB, 512 bytes/sec, 287277984 sec total
sd6 at scsibus1 targ 13 lun 0: <FUJITSU, MAP3735NC, 0108> SCSI3 0/direct
fixed
sd6: 70103MB, 512 bytes/sec, 143571316 sec total
psycho1 at mainbus0 addr 0xfffc6000: SUNW,psycho, impl 0, version 4, ign 7c0
psycho1: bus range 128-128, PCI bus 128
psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled
pci1 at psycho1
"counter-timer" at mainbus0 addr 0xfff9fc00 not configured
creator0 at mainbus0 addr 0xfebc0000: Creator3D, model SUNW,501-4788, dac 10
wsdisplay0 at creator0 mux 1
wsdisplay0: screen 0 added (std, sun emulation)
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
siop0: target 1 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
siop1: target 9 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
siop1: target 10 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
siop1: target 11 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
siop1: target 12 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
siop1: target 13 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
bootpath: /pci@1f,4000/scsi@3,0/disk@0,0
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
#



_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with
Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID2832
6::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4