Re: Audio on Blade 100

On Mon, July 12, 2010 10:56 pm, E. L. Evans V wrote:
> Hi.
>
> Is anyone using local audio on a Blade 100 with 4.6?
>
> I'm trying, and find I've what I'll call over-amped output, even when
> the volume is set (far) downwards.  The distortion is quite bad even at
> low volume levels.
>
> I've tried a few 320k constant bit rate MP3's, and two variable bit rate
> MP3's, whose bit rate do not exceed 64, TTBOMK.
>
> I've tried this on two Blade 100's and found similar if not identical
> results.  I have of course set volume and seemingly obvious mixer
> settings downward without joy.  My next step is to try Solaris and see
> if the sound hardware subsystems in the two systems are damaged in some
> way.
>
> The 'play' is from a local file, the goal is both local file and
> streamed audio via TCP with output to local analog audio for handling
> externally.
>
> I've used mpg123 and mpg321 with input files generated by iTunes (Mac
> (Intel)) and streamripper (Ubuntu (Linux (Intel)).  I am not running X.
>
>
> (Still working on my 'sili' solution to a storage problem, will
> summarize back shortly if no new data is rx'd.  Short version thus far
> is "no".  *sob*)
>
>
> Thanks.

Try 'mixerctl inputs.spkr.mute=on'

-- 
Joe Gidi
[email protected]