Re: Running Open BSD 4.8 on a Blade 1500 with XVR 1200

Am 10.11.2010 04:32, schrieb Michael Leicht:
> Am 09.11.2010 21:53, schrieb Matthieu Herrb:
>> On Tue, Nov 09, 2010 at 08:23:11PM +0100, Michael Leicht wrote:
>>> Hi Guys,
>>>
>>> As the title says, i got a got a huge problem running Open BSD on my Sun
>>> Blade 1500 with XVR 1200. As far as i understand, i have to create a
>>> simple xorg.conf like -  section "Device"
>>>                              Identifier  "Device0"
>>>                              Driver      "wildcatfb"
>>>                            EndSection
>>>
>>> and disable dev/console in /etc/ttys -  did so but it won't work.
>>>
>>> Any Ideas?
>>>
>>
>> Start by describing what happens. Error messages, join the contents of
>> /var/log/Xorg.0.log. 
>>
>> see http://www.openbsd.org/report.html for more advice.
> 
> Ok, here is my Xorg.0.log. Theres a server error at the end i see but i
> have no idea what to do with that. Xdm starts -or trys to do so- and the
> only thing i see is "starting xdm..". I can only go in using ssh at this
> point.
> 
> 
> 
> [868370.197] (--) Using wscons driver
[868370.238]
X.Org X Server 1.8.2
Release Date: 2010-07-01
[868370.238] X Protocol Version 11, Revision 0
[868370.238] Build Operating System: OpenBSD 4.8 sparc64
[868370.238] Current Operating System: OpenBSD bsdbox.my.domain 4.8
GENERIC#86 sparc64
[868370.239] Build Date: 09 August 2010  03:12:04AM
[868370.239]
[868370.239] Current version of pixman: 0.16.6
[868370.240] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[868370.240] Markers: (--) probed, (**) from config file, (==) default
setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[868370.240] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 10
04:09:19 2010
[868370.246] (==) Using config file: "/etc/X11/xorg.conf"
[868370.271] (==) No Layout section.  Using the first Screen section.
[868370.272] (==) No screen section available. Using defaults.
[868370.272] (**) |-->Screen "Default Screen Section" (0)
[868370.272] (**) |   |-->Monitor "<default monitor>"
[868370.273] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[868370.273] (**) |   |-->Device "Device0"
[868370.273] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[868370.273] (==) Not automatically adding devices
[868370.273] (==) Not automatically enabling devices
[868370.411] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[868370.411] (==) ModulePath set to "/usr/X11R6/lib/modules"
[868370.411] (==) |-->Input Device "<default pointer>"
[868370.411] (==) |-->Input Device "<default keyboard>"
[868370.411] (==) No Layout section. Using the default mouse configuration.
[868370.411] (==) No Layout section. Using the default keyboard
configuration.
[868370.418] (II) Loader magic: 0x4b7468
[868370.418] (II) Module ABI versions:
[868370.418] 	X.Org ANSI C Emulation: 0.4
[868370.418] 	X.Org Video Driver: 7.0
[868370.418] 	X.Org XInput driver : 9.0
[868370.418] 	X.Org Server Extension : 3.0
[868370.439] (--) PCI: (0:0:6:0) 10b9:7101:0000:0000 Acer Labs M7101
Power rev 0
[868370.446] (--) PCI: (1:0:3:0) 3d3d:07a2:3d3d:1044 3D Labs Wildcat
5110 rev 1, Mem @ 0x08000000/134217728, 0x00100000/131072,
0x02000000/33554432, BIOS @ 0x????????/65536
[868370.446] (--) PCI: (1:0:3:1) 3d3d:07a2:3d3d:1044 3D Labs Wildcat
5110 rev 1, Mem @ 0x00130000/4096
[868370.446] (II) LoadModule: "extmod"
[868370.499] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[868370.506] (II) Module extmod: vendor="X.Org Foundation"
[868370.508] 	compiled for 1.8.2, module version = 1.0.0
[868370.508] 	Module class: X.Org Server Extension
[868370.508] 	ABI class: X.Org Server Extension, version 3.0
[868370.508] (II) Loading extension MIT-SCREEN-SAVER
[868370.508] (II) Loading extension XFree86-VidModeExtension
[868370.508] (II) Loading extension XFree86-DGA
[868370.508] (II) Loading extension DPMS
[868370.508] (II) Loading extension XVideo
[868370.508] (II) Loading extension XVideo-MotionCompensation
[868370.508] (II) Loading extension X-Resource
[868370.508] (II) LoadModule: "dbe"
[868370.509] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[868370.511] (II) Module dbe: vendor="X.Org Foundation"
[868370.511] 	compiled for 1.8.2, module version = 1.0.0
[868370.511] 	Module class: X.Org Server Extension
[868370.511] 	ABI class: X.Org Server Extension, version 3.0
[868370.511] (II) Loading extension DOUBLE-BUFFER
[868370.511] (II) LoadModule: "glx"
[868370.512] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[868370.533] (II) Module glx: vendor="X.Org Foundation"
[868370.536] 	compiled for 1.8.2, module version = 1.0.0
[868370.536] 	ABI class: X.Org Server Extension, version 3.0
[868370.537] (==) AIGLX enabled
[868370.537] (II) Loading extension GLX
[868370.537] (II) LoadModule: "record"
[868370.538] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[868370.540] (II) Module record: vendor="X.Org Foundation"
[868370.540] 	compiled for 1.8.2, module version = 1.13.0
[868370.540] 	Module class: X.Org Server Extension
[868370.540] 	ABI class: X.Org Server Extension, version 3.0
[868370.540] (II) Loading extension RECORD
[868370.540] (II) LoadModule: "dri"
[868370.541] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[868370.554] (II) Module dri: vendor="X.Org Foundation"
[868370.554] 	compiled for 1.8.2, module version = 1.0.0
[868370.554] 	ABI class: X.Org Server Extension, version 3.0
[868370.555] (II) Loading extension XFree86-DRI
[868370.555] (II) LoadModule: "dri2"
[868370.556] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[868370.558] (II) Module dri2: vendor="X.Org Foundation"
[868370.558] 	compiled for 1.8.2, module version = 1.2.0
[868370.558] 	ABI class: X.Org Server Extension, version 3.0
[868370.558] (II) Loading extension DRI2
[868370.558] (II) LoadModule: "wildcatfb"
[868370.559] (II) Loading /usr/X11R6/lib/modules/drivers/wildcatfb_drv.so
[868370.566] (II) Module wildcatfb: vendor="X.Org Foundation"
[868370.566] 	compiled for 1.8.2, module version = 0.0.1
[868370.566] 	ABI class: X.Org Video Driver, version 7.0
[868370.567] Segmentation fault at address 0x0
[868370.567]
Fatal server error:
[868370.567] Caught signal 11 (Segmentation fault). Server aborting
[868370.567]
[868370.567]
Please consult the The X.Org Foundation support
	 at http://wiki.x.org
 for help.
[868370.567] Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[868370.567]

Sorry Guys!

-- 
         /"\
	 \ /     Plain Text Ribbon Campaign
 	  x   Say NO to HTML in email and news
	 / \

[demime 1.01d removed an attachment of type application/pgp-keys which had a name of 0x5023125A.asc]