Sun Fire v245 - OpenBSD 5.0 (sparc64) - kernel panic at boot
Daniel Plominski <[email protected]>
| Newsgroups | gmane.os.openbsd.sparc,gmane.os.openbsd.bugs |
|---|---|
| Message-ID | <[email protected]> |
Hello OpenBSD Bugs Team,
OpenBSD 5.0 (sparc64) will panic during boot.
System: Sun Fire v245
OpenBootPROM: update from 4.22.x to 4.30.4 (2009)
A.L.O.M update from 1.6.1 to 1.6.10
{1} ok printenv
Variable Name Value Default Value
asr-policy normal normal
keyboard-layout German
test-args
diag-passes 1 1
local-mac-address? true true
fcode-debug? false false
scsi-initiator-id 7 7
oem-logo No default
oem-logo? false false
oem-banner System: web23sc.domain.tld No default
oem-banner? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
output-device ttya screen
input-device ttya keyboard
auto-boot-on-error? true true
error-reset-recovery sync sync
load-base 16384 16384
auto-boot? true true
network-boot-arguments
boot-command boot boot
diag-file
diag-device net net
boot-file
boot-device disk net cdrom disk net
use-nvramrc? false false
nvramrc ." ChassisSerialNumber 0 ...
security-mode none No default
security-password No default
security-#badlogins 0 No default
verbosity normal normal
diag-trigger error-reset power-on-res ... error-reset
power-on-res ...
service-mode? false false
diag-script normal normal
diag-level max max
diag-switch? false false
{1} ok boot cdrom
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V245, No Keyboard
Copyright 2009 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.4, 8192 MB memory installed, Serial #00000000.
Ethernet address aa:bb:cc:dd:ee:ff, Host ID: 00000000.
Rebooting with command: boot cdrom
Boot device: /pci@1e,600000/pci@0/pci@1/pci@0/ide@1f/cdrom@0,0:f File and
args:
OpenBSD IEEE 1275 Bootblock 1.3
..>> OpenBSD BOOT 1.4
Trying bsd...
Booting /pci@1e,600000/pci@0/pci@1/pci@0/ide@1f/cdrom@0,0:f/bsd
3834776@0x1000000+7272@0x13a8398+3252416@0x1800000+941888@0x1b1a0c0
symbols @ 0xfefc2240 65 start=0x1000000
console is /ebus@1f,464000/serial@2,80
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.0 (RAMDISK) #31: Wed Aug 17 10:53:59 MDT 2011
[email protected]:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 8589934592 (8192MB)
avail mem = 8447467520 (8056MB)
mainbus0 at root: Sun Fire V245
"SUNW,UltraSPARC-IIIi" at mainbus0 not configured
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64
b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249 PCI-PCI" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00
rtc0 at ebus0 addr 70-73: m5823
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi
pci4 at ppb3 bus 6
ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi
pci5 at ppb4 bus 7
ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba
pci6 at ppb5 bus 8
ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci7 at ppb6 bus 9
bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3
(0x9003): ivec 0x795, address aa:bb:cc:dd:ee:ff
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3
(0x9003): ivec 0x796, address aa:bb:cc:dd:ee:ff
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci8 at ppb7 bus 10
ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci10 at ppb9 bus 12
bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3
(0x9003): ivec 0x796, address aa:bb:cc:dd:ee:ff
brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3
(0x9003): ivec 0x797, address aa:bb:cc:dd:ee:ff
brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci11 at ppb10 bus 13
mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
scsibus1 at mpi0: 63 targets
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST973401LSUN72G, 0556> SCSI3 0/direct
fixed
sd0: 70007MB, 512 bytes/sector, 143374738 sectors
sd1 at scsibus1 targ 1 lun 0: <SEAGATE, ST973401LSUN72G, 0556> SCSI3 0/direct
fixed
sd1: 70007MB, 512 bytes/sector, 143374738 sectors
sd2 at scsibus1 targ 2 lun 0: <SEAGATE, ST973401LSUN72G, 0556> SCSI3 0/direct
fixed
sd2: 70007MB, 512 bytes/sector, 143374738 sectors
sd3 at scsibus1 targ 3 lun 0: <SEAGATE, ST973401LSUN72G, 0556> SCSI3 0/direct
fixed
sd3: 70007MB, 512 bytes/sector, 143374738 sectors
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
pyro1: dvma map c0000000-ffffffff
pci12 at pyro1
ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci13 at ppb11 bus 3
ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci14 at ppb12 bus 4
ebus1 at mainbus0: ign 7c0
"flashprom" at ebus1 addr 0-1fffff not configured
com0 at ebus1 addr 80-87 ivec 0x8: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 40-47 ivec 0x9: ns16550a, 16 byte fifo
"rmc-comm" at ebus1 addr 0-7 ivec 0xa not configured
"gpio" at ebus1 addr c0-c0 not configured
"env-monitor" at ebus1 addr 0-80 not configured
"power" at ebus1 addr 40-c1 ivec 0x3 not configured
"i2c" at mainbus0 not configured
data error type 32 sfsr=80800c sfva=400793e4041 afsr=10080005000000
afva=7f8100010c0 tf=0xe0017aa8
panic: data fault: pc=101b490 addr=400793e4041 sfsr=80800c<TM,PRIV,W>
halted
Program terminated
{1} ok
it seems well to describe
http://marc.info/?l=openbsd-sparc&m=133016022323288&w=2
On Tue, Mar 13, 2012 at 08:15:33PM +0100, Mark Kettenis wrote:
> > Date: Mon, 12 Mar 2012 22:39:31 +0100 (CET)
> > From: Mark Kettenis <[email protected]>
> >
> > > Date: Sat, 25 Feb 2012 09:55:57 +0100
> > > From: Paul de Weerd <[email protected]>
> > >
> > > I recently got a v215 from a friend and have installed OpenBSD on it.
> > > Occassionally, it will panic during boot. This happened during
> > > install and I see it now during regular reboots. I can pretty much
> > > reproduce this at will with a couple of reboots.
> > >
> > > Could this be faulty hardware ? To reset the ALOM password, I
> > > installed Solaris 10 (took an eternity) and that never showed any
> > > problems, but I guess that doesn't prove much.
> > >
> > > First the panic and then full dmesg (from a succesful boot) are
> > > included below.
> >
> > I doubt this is faulty hardware. I've seen similar reports for a
> > v445, which has the same crappy Acer Labs pciide(4) controller. I
> > fear that the wdc.c changes made in April 2011 introduced this
> > behaviour.
>
> So thanks to Paul giving me access to the machine in question I've
> been able to figure out what's going wrong here.
>
> The data error always happens when running wdcintr() for channel 1.
> Now on these machines we have the following line in dmesg
>
> ...
> pciide0: channel 1 disabled (no drives)
> ...
>
> indicating that there is no actual hardware connected to channel 1.
> As a result of this we skip further initialization of the channel.
> Therefore it shouldn't be a terrible surprise that the chip doesn't
> like it when we try to read registers associated with this channel.
> On crappy PC hardware this won't be noticed, but on sparc64 this
> results in an unrecoverable fault.
>
> The solution is easy. We shouldn't be calling wdcintr() for a channel
> that isn't properly initialized.
>
> ok?
>
>
> Index: pciide.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/pci/pciide.c,v
> retrieving revision 1.337
> diff -u -p -r1.337 pciide.c
> --- pciide.c 15 Jan 2012 15:16:23 -0000 1.337
> +++ pciide.c 13 Mar 2012 18:54:50 -0000
> @@ -1838,6 +1838,9 @@ pciide_pci_intr(void *arg)
> if (cp->compat)
> continue;
>
> + if (cp->hw_ok == 0)
> + continue;
> +
> if (pciide_intr_flag(cp) == 0)
> continue;
>
http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/pciide.c
would be the patch in openbsd 5.1 current?
Revision 1.338: download - view: text, markup, annotated - select for diffs
Tue Mar 13 21:32:42 2012 UTC (4 weeks, 4 days ago) by kettenis
Branches: MAIN
CVS tags: HEAD
Diff to: previous 1.337: preferred, coloured
Changes since revision 1.337: +4 -1 lines
Don't call wdcintr() for channels that aren't properly initialized or don't
have any drives on them. Fixes a panic seen on sparc64 machines with that
pesky Acer Labs chipset.
ok deraadt@, krw@, henning@
System OpenBootPROM
{1} ok setenv boot-command boot -c
boot-command = boot -c
{1} ok
{1} ok reset-all
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V245, No Keyboard
Copyright 2009 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.4, 8192 MB memory installed, Serial #00000000.
Ethernet address aa:bb:cc:dd:ee:ff, Host ID: 00000000.
Boot device: /pci@1e,600000/pci@0/pci@1/pci@0/ide@1f/cdrom@0,0:f File and
args: -c
OpenBSD IEEE 1275 Bootblock 1.3
..>> OpenBSD BOOT 1.4
Trying bsd...
Booting /pci@1e,600000/pci@0/pci@1/pci@0/ide@1f/cdrom@0,0:f/bsd
3834776@0x1000000+7272@0x13a8398+3252416@0x1800000+941888@0x1b1a0c0
symbols @ 0xfefc2240 65 start=0x1000000
console is /ebus@1f,464000/serial@2,80
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.0 (RAMDISK) #31: Wed Aug 17 10:53:59 MDT 2011
[email protected]:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 8589934592 (8192MB)
avail mem = 8447467520 (8056MB)
User Kernel Config
UKC> disable pciide
89 pciide* disabled
90 pciide* disabled
UKC> quit
Continuing...
mainbus0 at root: Sun Fire V245
"SUNW,UltraSPARC-IIIi" at mainbus0 not configured
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64
b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249 PCI-PCI" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00
rtc0 at ebus0 addr 70-73: m5823
"Acer Labs M5229 UDMA IDE" rev 0xc8 at pci3 dev 31 function 0 not configured
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi
pci4 at ppb3 bus 6
ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi
pci5 at ppb4 bus 7
ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba
pci6 at ppb5 bus 8
ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci7 at ppb6 bus 9
bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3
(0x9003): ivec 0x795, address aa:bb:cc:dd:ee:ff
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3
(0x9003): ivec 0x796, address aa:bb:cc:dd:ee:ff
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci8 at ppb7 bus 10
ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci10 at ppb9 bus 12
bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3
(0x9003): ivec 0x796, address aa:bb:cc:dd:ee:ff
brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3
(0x9003): ivec 0x797, address aa:bb:cc:dd:ee:ff
brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci11 at ppb10 bus 13
mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST973401LSUN72G, 0556> SCSI3 0/direct
fixed
sd0: 70007MB, 512 bytes/sector, 143374738 sectors
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST973401LSUN72G, 0556> SCSI3 0/direct
fixed
sd1: 70007MB, 512 bytes/sector, 143374738 sectors
sd2 at scsibus0 targ 2 lun 0: <SEAGATE, ST973401LSUN72G, 0556> SCSI3 0/direct
fixed
sd2: 70007MB, 512 bytes/sector, 143374738 sectors
sd3 at scsibus0 targ 3 lun 0: <SEAGATE, ST973401LSUN72G, 0556> SCSI3 0/direct
fixed
sd3: 70007MB, 512 bytes/sector, 143374738 sectors
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
pyro1: dvma map c0000000-ffffffff
pci12 at pyro1
ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci13 at ppb11 bus 3
ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci14 at ppb12 bus 4
ebus1 at mainbus0: ign 7c0
"flashprom" at ebus1 addr 0-1fffff not configured
com0 at ebus1 addr 80-87 ivec 0x8: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 40-47 ivec 0x9: ns16550a, 16 byte fifo
"rmc-comm" at ebus1 addr 0-7 ivec 0xa not configured
"gpio" at ebus1 addr c0-c0 not configured
"env-monitor" at ebus1 addr 0-80 not configured
"power" at ebus1 addr 40-c1 ivec 0x3 not configured
"i2c" at mainbus0 not configured
uhub3 at uhub2 port 1 "vendor 0x03eb Standard USB Hub" rev 1.10/3.00 addr 2
softraid0 at root
scsibus1 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@1,0/pci@0,0/ide@1f,0/cdrom@0,0:f
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/sparc64 5.0 installation program.
(I)nstall, (U)pgrade or (S)hell?
best regards
[demime 1.01d removed an attachment of type application/pkcs7-signature which had a name of smime.p7s]