Re: X11 not coming up on SUN Netra T1 with Raptor GFX-8P PGX32 PCI card
"Dr. Wolfgang Daum" <[email protected]>
| Newsgroups | gmane.os.openbsd.sparc |
|---|---|
| Message-ID | <D480D02D8288454592C71BB026EF318E@Papa2> |
Here is the dmesg:
console is /pci@1f,0/pci@1,1/isa@7/serial@0,3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2012 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 5.1 (GENERIC) #130: Sun Feb 12 12:19:20 MST 2012
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 2147483648 (2048MB)
avail mem = 2100641792 (2003MB)
mainbus0 at root: Netra T1 200 (UltraSPARC-IIe 500MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 500 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external
(64 b/l)
psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-2, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 12 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59
lom0 at ebus0 addr 200000-200003 ivec 0x2a: LOMlite2 rev 3.12
alipm0 at pci1 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz
clock
iic0 at alipm0
"max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs
spdmem0 at iic0 addr 0x54: 512MB SDRAM registered ECC PC133CL2
spdmem1 at iic0 addr 0x55: 512MB SDRAM registered ECC PC133CL2
spdmem2 at iic0 addr 0x56: 512MB SDRAM registered ECC PC133CL3
spdmem3 at iic0 addr 0x57: 512MB SDRAM registered ECC PC133CL3
ebus1 at pci1 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
power0 at ebus1 addr 2000-2007 ivec 0x25
com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
gem0 at pci1 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7c6, address
00:03:ba:10:90:a3
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd, model 0x0002
ohci0 at pci1 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version 1.0,
legacy support
pciide0 at pci1 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1110> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
gem1 at pci1 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7dc, address
00:03:ba:10:90:a4
ukphy1 at gem1 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd, model 0x0002
ohci1 at pci1 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x7e6, version 1.0,
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Sun OHCI root hub" rev 1.00/1.00 addr 1
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
pci2 at ppb1 bus 2
siop0 at pci2 dev 8 function 0 "Symbios Logic 53c896" rev 0x07: ivec 0x7e0,
using 8K of on-board RAM
scsibus1 at siop0: 16 targets, initiator 7
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST336704LSUN36G, 0326> SCSI3
0/direct fixed serial.SEAGATE_ST336704LSUN36G_3CD1HNWC00007129GNW3
sd0: 34732MB, 512 bytes/sector, 71132959 sectors
siop0: target 1 now using 8 bit async xfers
siop0: target 1 now using 8 bit 40.0 MHz 31 REQ/ACK offset xfers
sd1 at scsibus1 targ 1 lun 0: <IBM-ESXS, PYH036C1-ETS10F, RXQN> SCSI2
0/direct fixed t10.HITACHI_HUS103073FL3800_V3WDP7UA
sd1: 34715MB, 512 bytes/sector, 71096640 sectors
siop1 at pci2 dev 8 function 1 "Symbios Logic 53c896" rev 0x07: ivec 0x7e0,
using 8K of on-board RAM
scsibus2 at siop1: 16 targets, initiator 7
gfxp0 at pci2 dev 5 function 0 "TI 3DLabs Permedia 2" rev 0x11
gfxp0: GFXP, 1152x900
wsdisplay0 at gfxp0 mux 1
wsdisplay0: screen 0 added (std, sun emulation)
siop0: target 0 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Alcor Micro USB Mouse"
rev 1.10/51.27 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub2 at uhub1 port 1 "Fujitsu Component product 0x100e" rev 2.00/1.04 addr
2
uhidev1 at uhub2 port 4 configuration 1 interface 0 "Fujitsu Component Type
7 Keyboard" rev 2.00/1.04 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 33
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@1f,0/pci@1,0/scsi@8,0/disk@0,0
root on sd0a (a3b100d6d56dfa38.a) swap on sd0b dump on sd0b
I ran X -configure. It terminated with error code 2.
Here is the Xorg.0.log file:
[3332772.312]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[3332772.314] X Protocol Version 11, Revision 0
[3332772.315] Build Operating System: OpenBSD 5.1 sparc64
[3332772.315] Current Operating System: OpenBSD Netra-T1b.d1aum1 5.1
GENERIC#130 sparc64
[3332772.317] Build Date: 11 February 2012 11:37:16PM
[3332772.318]
[3332772.318] Current version of pixman: 0.22.2
[3332772.319] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[3332772.319] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[3332772.323] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 3
10:21:43 2012
[3332772.324] (II) Loader magic: 0x4c0018
[3332772.324] (II) Module ABI versions:
[3332772.324] X.Org ANSI C Emulation: 0.4
[3332772.324] X.Org Video Driver: 11.0
[3332772.324] X.Org XInput driver : 13.0
[3332772.324] X.Org Server Extension : 6.0
[3332772.518] (--) Using wscons driver
[3332772.538] (--) PCI: (0:2:5:0) 104c:3d07:1227:0008 rev 17, Mem @
0x00020000/131072, 0x00800000/8388608, 0x01000000/8388608, BIOS @
0x????????/65536
[3332772.542] List of video drivers:
[3332772.543] ati
[3332772.543] glint
[3332772.543] mach64
[3332772.544] r128
[3332772.544] radeon
[3332772.545] sunffb
[3332772.545] wildcatfb
[3332772.545] wsfb
[3332772.546] (II) LoadModule: "ati"
[3332772.547] (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so
[3332772.559] (II) Module ati: vendor="X.Org Foundation"
[3332772.559] compiled for 1.11.4, module version = 6.12.2
[3332772.559] Module class: X.Org Video Driver
[3332772.559] ABI class: X.Org Video Driver, version 11.0
[3332772.560] (II) LoadModule: "glint"
[3332772.560] (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.so
[3332772.573] (II) Module glint: vendor="X.Org Foundation"
[3332772.586] compiled for 1.11.4, module version = 1.2.4
[3332772.586] Module class: X.Org Video Driver
[3332772.586] ABI class: X.Org Video Driver, version 11.0
[3332772.586] (II) LoadModule: "mach64"
[3332772.587] (II) Loading /usr/X11R6/lib/modules/drivers/mach64_drv.so
[3332772.597] (II) Module mach64: vendor="X.Org Foundation"
[3332772.599] compiled for 1.11.4, module version = 6.8.2
[3332772.599] Module class: X.Org Video Driver
[3332772.599] ABI class: X.Org Video Driver, version 11.0
[3332772.604] (II) LoadModule: "r128"
[3332772.605] (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.so
[3332772.614] (II) Module r128: vendor="X.Org Foundation"
[3332772.628] compiled for 1.11.4, module version = 6.8.1
[3332772.629] Module class: X.Org Video Driver
[3332772.629] ABI class: X.Org Video Driver, version 11.0
[3332772.629] (II) LoadModule: "radeon"
[3332772.630] (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.so
[3332772.664] (II) Module radeon: vendor="X.Org Foundation"
[3332772.667] compiled for 1.11.4, module version = 6.12.2
[3332772.667] Module class: X.Org Video Driver
[3332772.667] ABI class: X.Org Video Driver, version 11.0
[3332772.675] (II) LoadModule: "sunffb"
[3332772.676] (II) Loading /usr/X11R6/lib/modules/drivers/sunffb_drv.so
[3332772.680] (II) Module sunffb: vendor="X.Org Foundation"
[3332772.681] compiled for 1.11.4, module version = 1.2.1
[3332772.681] Module class: X.Org Video Driver
[3332772.681] ABI class: X.Org Video Driver, version 11.0
[3332772.682] (II) LoadModule: "wildcatfb"
[3332772.683] (II) Loading /usr/X11R6/lib/modules/drivers/wildcatfb_drv.so
[3332772.687] (II) Module wildcatfb: vendor="X.Org Foundation"
[3332772.687] compiled for 1.11.4, module version = 0.0.1
[3332772.687] ABI class: X.Org Video Driver, version 11.0
[3332772.687] (II) LoadModule: "wsfb"
[3332772.689] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so
[3332772.691] (II) Module wsfb: vendor="X.Org Foundation"
[3332772.691] compiled for 1.11.4, module version = 0.4.0
[3332772.691] ABI class: X.Org Video Driver, version 11.0
[3332772.692] (WW) Falling back to old probe method for glint
[3332772.693] (WW) Falling back to old probe method for sunffb
[3332772.693] (WW) Falling back to old probe method for wildcatfb
[3332772.693] (WW) Falling back to old probe method for wsfb
[3332772.693] No devices to configure. Configuration failed.
[3332772.697] Server terminated with error (2). Closing log file.
I then re-ran startx, which I had to kill with CTRL-C and am getting the
following log:
[3333003.998] (--) Using wscons driver
[3333004.029]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[3333004.030] X Protocol Version 11, Revision 0
[3333004.030] Build Operating System: OpenBSD 5.1 sparc64
[3333004.031] Current Operating System: OpenBSD Netra-T1b.d1aum1 5.1
GENERIC#130 sparc64
[3333004.034] Build Date: 11 February 2012 11:37:16PM
[3333004.034]
[3333004.035] Current version of pixman: 0.22.2
[3333004.035] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[3333004.036] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[3333004.040] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 3
10:25:34 2012
[3333004.043] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[3333004.044] (==) No Layout section. Using the first Screen section.
[3333004.044] (==) No screen section available. Using defaults.
[3333004.044] (**) |-->Screen "Default Screen Section" (0)
[3333004.044] (**) | |-->Monitor "<default monitor>"
[3333004.046] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[3333004.046] (==) Disabling SIGIO handlers for input devices
[3333004.046] (==) Automatically adding devices
[3333004.047] (==) Automatically enabling devices
[3333004.048] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[3333004.048] (==) ModulePath set to "/usr/X11R6/lib/modules"
[3333004.048] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[3333004.048] (II) Loader magic: 0x4c0018
[3333004.048] (II) Module ABI versions:
[3333004.048] X.Org ANSI C Emulation: 0.4
[3333004.048] X.Org Video Driver: 11.0
[3333004.048] X.Org XInput driver : 13.0
[3333004.048] X.Org Server Extension : 6.0
[3333004.068] (--) PCI: (0:2:5:0) 104c:3d07:1227:0008 rev 17, Mem @
0x00020000/131072, 0x00800000/8388608, 0x01000000/8388608, BIOS @
0x????????/65536
[3333004.069] (II) LoadModule: "extmod"
[3333004.072] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[3333004.076] (II) Module extmod: vendor="X.Org Foundation"
[3333004.076] compiled for 1.11.4, module version = 1.0.0
[3333004.076] Module class: X.Org Server Extension
[3333004.076] ABI class: X.Org Server Extension, version 6.0
[3333004.076] (II) Loading extension MIT-SCREEN-SAVER
[3333004.076] (II) Loading extension XFree86-VidModeExtension
[3333004.076] (II) Loading extension XFree86-DGA
[3333004.076] (II) Loading extension DPMS
[3333004.077] (II) Loading extension XVideo
[3333004.077] (II) Loading extension XVideo-MotionCompensation
[3333004.077] (II) Loading extension X-Resource
[3333004.077] (II) LoadModule: "dbe"
[3333004.079] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[3333004.082] (II) Module dbe: vendor="X.Org Foundation"
[3333004.082] compiled for 1.11.4, module version = 1.0.0
[3333004.082] Module class: X.Org Server Extension
[3333004.082] ABI class: X.Org Server Extension, version 6.0
[3333004.082] (II) Loading extension DOUBLE-BUFFER
[3333004.082] (II) LoadModule: "glx"
[3333004.084] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[3333004.088] (II) Module glx: vendor="X.Org Foundation"
[3333004.089] compiled for 1.11.4, module version = 1.0.0
[3333004.089] ABI class: X.Org Server Extension, version 6.0
[3333004.089] (==) AIGLX enabled
[3333004.089] (II) Loading extension GLX
[3333004.089] (II) LoadModule: "record"
[3333004.092] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[3333004.095] (II) Module record: vendor="X.Org Foundation"
[3333004.095] compiled for 1.11.4, module version = 1.13.0
[3333004.095] Module class: X.Org Server Extension
[3333004.095] ABI class: X.Org Server Extension, version 6.0
[3333004.095] (II) Loading extension RECORD
[3333004.095] (II) LoadModule: "dri"
[3333004.097] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[3333004.101] (II) Module dri: vendor="X.Org Foundation"
[3333004.102] compiled for 1.11.4, module version = 1.0.0
[3333004.102] ABI class: X.Org Server Extension, version 6.0
[3333004.102] (II) Loading extension XFree86-DRI
[3333004.102] (II) LoadModule: "dri2"
[3333004.104] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[3333004.107] (II) Module dri2: vendor="X.Org Foundation"
[3333004.107] compiled for 1.11.4, module version = 1.2.0
[3333004.107] ABI class: X.Org Server Extension, version 6.0
[3333004.107] (II) Loading extension DRI2
[3333004.108] (==) Matched wsfb as autoconfigured driver 0
[3333004.108] (==) Assigned the driver to the xf86ConfigLayout
[3333004.108] (II) LoadModule: "wsfb"
[3333004.109] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so
[3333004.111] (II) Module wsfb: vendor="X.Org Foundation"
[3333004.112] compiled for 1.11.4, module version = 0.4.0
[3333004.112] ABI class: X.Org Video Driver, version 11.0
[3333004.112] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[3333004.112] (WW) Falling back to old probe method for wsfb
[3333004.113] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so
[3333004.114] (II) wsfb(0): using default device
[3333004.114] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[3333004.115] (II) wsfb(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 8/8
[3333004.115] (==) wsfb(0): Depth 8, (==) framebuffer bpp 8
[3333004.115] (==) wsfb(0): Default visual is PseudoColor
[3333004.116] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0)
[3333004.116] (II) wsfb(0): Vidmem: 1012k
[3333004.116] (==) wsfb(0): DPI set to (96, 96)
[3333004.116] (**) wsfb(0): Using "Shadow Framebuffer"
[3333004.116] (II) Loading sub module "shadow"
[3333004.116] (II) LoadModule: "shadow"
[3333004.121] (II) Loading /usr/X11R6/lib/modules/libshadow.so
[3333004.124] (II) Module shadow: vendor="X.Org Foundation"
[3333004.124] compiled for 1.11.4, module version = 1.1.0
[3333004.124] ABI class: X.Org ANSI C Emulation, version 0.4
[3333004.124] (II) Loading sub module "fb"
[3333004.124] (II) LoadModule: "fb"
[3333004.129] (II) Loading /usr/X11R6/lib/modules/libfb.so
[3333004.135] (II) Module fb: vendor="X.Org Foundation"
[3333004.135] compiled for 1.11.4, module version = 1.0.0
[3333004.135] ABI class: X.Org ANSI C Emulation, version 0.4
[3333004.138] (==) wsfb(0): Backing store disabled
[3333004.139] (==) RandR enabled
[3333004.140] (II) Initializing built-in extension Generic Event Extension
[3333004.140] (II) Initializing built-in extension SHAPE
[3333004.140] (II) Initializing built-in extension MIT-SHM
[3333004.140] (II) Initializing built-in extension XInputExtension
[3333004.140] (II) Initializing built-in extension XTEST
[3333004.140] (II) Initializing built-in extension BIG-REQUESTS
[3333004.140] (II) Initializing built-in extension SYNC
[3333004.140] (II) Initializing built-in extension XKEYBOARD
[3333004.140] (II) Initializing built-in extension XC-MISC
[3333004.140] (II) Initializing built-in extension SECURITY
[3333004.140] (II) Initializing built-in extension XINERAMA
[3333004.140] (II) Initializing built-in extension XFIXES
[3333004.140] (II) Initializing built-in extension RENDER
[3333004.140] (II) Initializing built-in extension RANDR
[3333004.140] (II) Initializing built-in extension COMPOSITE
[3333004.141] (II) Initializing built-in extension DAMAGE
[3333005.586] (II) AIGLX: Screen 0 is not DRI2 capable
[3333005.586] (II) AIGLX: Screen 0 is not DRI capable
[3333005.701] (II) AIGLX: Loaded and initialized swrast
[3333005.701] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[3333007.477] (II) config/wscons: checking input device /dev/wskbd
[3333007.477] (II) wskbd: using layout us
[3333007.477] (II) LoadModule: "kbd"
[3333007.481] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[3333007.483] (II) Module kbd: vendor="X.Org Foundation"
[3333007.483] compiled for 1.11.4, module version = 1.6.1
[3333007.483] Module class: X.Org XInput Driver
[3333007.484] ABI class: X.Org XInput driver, version 13.0
[3333007.484] (II) Using input driver 'kbd' for '/dev/wskbd'
[3333007.484] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[3333007.485] (**) /dev/wskbd: always reports core events
[3333007.485] (**) /dev/wskbd: always reports core events
[3333007.485] (**) Option "Protocol" "standard"
[3333007.486] (**) Option "XkbRules" "base"
[3333007.486] (**) Option "XkbModel" "pc105"
[3333007.486] (**) Option "XkbLayout" "us"
[3333007.486] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[3333007.515] (II) config/wscons: checking input device /dev/wsmouse
[3333007.515] (II) LoadModule: "ws"
[3333007.519] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[3333007.521] (II) Module ws: vendor="X.Org Foundation"
[3333007.521] compiled for 1.11.4, module version = 1.3.0
[3333007.521] Module class: X.Org XInput Driver
[3333007.521] ABI class: X.Org XInput driver, version 13.0
[3333007.522] (II) Using input driver 'ws' for '/dev/wsmouse'
[3333007.522] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[3333007.523] (**) /dev/wsmouse: always reports core events
[3333007.523] (II) ws: /dev/wsmouse: debuglevel 0
[3333007.523] (**) Option "Device" "/dev/wsmouse"
[3333007.523] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[3333007.524] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[3333007.524] (**) ws: /dev/wsmouse: associated screen: 0
[3333007.525] (II) ws: /dev/wsmouse: minimum x position: 0
[3333007.525] (II) ws: /dev/wsmouse: maximum x position: 1151
[3333007.525] (II) ws: /dev/wsmouse: minimum y position: 0
[3333007.525] (II) ws: /dev/wsmouse: maximum y position: 899
[3333007.525] (==) ws: /dev/wsmouse: Buttons: 7
[3333007.553] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[3333007.553] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 7)
[3333007.556] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[3333007.556] (**) /dev/wsmouse: (accel) acceleration profile 0
[3333007.556] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[3333007.556] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[3333077.021] (II) UnloadModule: "kbd"
[3333077.021] (II) Unloading kbd
[3333077.053] (II) UnloadModule: "ws"
[3333077.053] (II) Unloading ws
[3333077.237] Server terminated successfully (0). Closing log file.
Wolf.
-----Original Message-----
From: Matthieu Herrb
Sent: Saturday, November 03, 2012 3:12 AM
To: Dr. Wolfgang Daum
Cc: [email protected]
Subject: Re: X11 not coming up on SUN Netra T1 with Raptor GFX-8P PGX32 PCI
card
On Fri, Nov 02, 2012 at 10:34:10PM -0400, Dr. Wolfgang Daum wrote:
> Hi,
>
> I am having trouble in getting my SUN Netra T1, equipped with a Raptor
> GFX-8P
> PGX32 PCI card to run in X11. When booting it sees the card on the PCI bus
> as
> 5 2 0. When installing Unbuntu Sparc 7.10 or Xbuntu Spar 7.10 the screen
> actually shows up during the boot process, but then goes away. So I know
> that
> the card works and can be recognized. I have a SUN USB keyboard and SUN
> mouse
> attached to the to USB ports.
>
> Do I need to adjust the NVRAM?
>
> What else am I missing?
>
> I am using the term A to log in and boot at 9600 baud.
>
> Help would be greatly appreciated.
We'd need to see dmesg output and /var/log/Xorg.0.log from a failed
attempt to start X to be able to help.
--
Matthieu Herrb