Re: XVR-100 out of Radeon 7000 (Almost there...)
pekka <[email protected]>
| Newsgroups | gmane.os.openbsd.sparc |
|---|---|
| Message-ID | <[email protected]> |
Hi, I found out that the ROM image from internet was faulty so I installed Solaris 10 into VirtualBox on OS X Mountain Lion and extracted new ROM from xvr10-DVI_console-040512.tar.Z DOS command "flashrom -i" showed that the card had 128k and the flashing succeeded. Sun Ultra 45's OBP recognised the card and so did OpenBSD (radeonfb). However, both SUN and HP monitors show odd pattern (like I was looking thru cotton fabric, like a mummy) which I could not get rid off. The pattern is on both on analog (HD15) and digital channel (DVI). I can change DVI console resolution from OBP so I tried: r1280x1024x60 r1280x1024x75 => no picture at all r1024x768x60 but the pattern remained. Starting X in OpenBSD works; I can see the fvwm windows but the sick-sack pattern makes the text unreadable. To be continued... -pekka- On 6/30/13 1:12 PM, Tobias Ulmer wrote: > On Sat, Jun 29, 2013 at 11:09:00AM +0300, pekka wrote: >> Hi, >> >> has anybody managed to reflash >> ATI Radeon 7000 64MB PCI (not MAC version!) >> into XVR-100? >> >> I tried flashrom with firmware 1.61 as >> explained in forums.nekochan.net but >> obdiag in OBP does not see the card. >> >> -pekka- >> > > Interesting... No. This is what a real one looks like: > > Domain /dev/pci3: > 0:2:0: ATI Radeon VE > 0x0000: Vendor ID: 1002 Product ID: 5159 > 0x0004: Command: 0286 Status: 02b0 > 0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 00 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 84 Cache Line Size: 10 > 0x0010: BAR mem prefetchable 32bit addr: 0x08000000/0x08000000 > 0x0014: BAR io addr: 0x00000300/0x0100 > 0x0018: BAR mem 32bit addr: 0x00100000/0x00010000 > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1002 Product ID: 0908 > 0x0030: Expansion ROM Base Address: 00120001 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 08 Max Lat: 00 > 0x0050: Capability 0x01: Power Management