Sun Ultra 45 with -current. Just FYI

Have this laying around the office. Decided to use it as more than a door
stop.

console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 5.4-current (RAMDISK) #45: Mon Sep 30 02:30:21 MDT 2013
    [email protected]:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 1073741824 (1024MB)
avail mem = 1045323776 (996MB)
mainbus0 at root: Sun Ultra 45 Workstation
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external
(64 b/l)
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci2 at pci3 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
"Acer Labs M5455 Audio" rev 0x21 at pci3 dev 29 function 0 not configured
"Acer Labs M7101 Power" rev 0x00 at pci3 dev 30 function 1 not configured
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-85JS, F100> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xaa
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
pci5 at ppb4 bus 7
bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x796, address 00:14:4f:23:88:f4
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x797, address 00:14:4f:23:88:f5
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb5 at pci1 dev 3 function 0 "PLX PEX 8532" rev 0xaa: msi
pci6 at ppb5 bus 8
ppb6 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xaa: msi
pci7 at ppb6 bus 9
ppb7 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xaa
pci8 at ppb7 bus 10
ppb8 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci9 at ppb8 bus 11
mpi0 at pci9 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
scsibus1 at mpi0: 63 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HDS7225S, A9CA> SCSI3 0/direct
fixed naa.5000cca20cc2c85e
sd0: 238471MB, 512 bytes/sector, 488390625 sectors
ppb9 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci10 at ppb9 bus 12
uhci0 at pci10 dev 1 function 0 "VIA VT83C572 USB" rev 0x61: ivec 0x78b
uhci1 at pci10 dev 1 function 1 "VIA VT83C572 USB" rev 0x61: ivec 0x78c
ehci1 at pci10 dev 1 function 2 "VIA VT6202 USB" rev 0x63: ivec 0x78d
usb4 at ehci1: USB revision 2.0
uhub4 at usb4 "VIA EHCI root hub" rev 2.00/1.00 addr 1
radeonfb0 at pci10 dev 2 function 0 "ATI Radeon VE" rev 0x00
radeonfb0: SUNW,375-3290, 1024x768
wsdisplay0 at radeonfb0: console (std, sun emulation)
usb5 at uhci0: USB revision 1.0
uhub5 at usb5 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci1: USB revision 1.0
uhub6 at usb6 "VIA UHCI root hub" rev 1.00/1.00 addr 1
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 255
pyro1: dvma map c0000000-ffffffff
pci11 at pyro1
ebus0 at mainbus0
"flashprom" at ebus0 addr 0-1fffff not configured
rtc0 at ebus0 addr 100000-10000f: bq4802
com0 at ebus0 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
com1 at ebus0 addr 0-7 ivec 0x7c8: ns16550a, 16 byte fifo
"env-monitor" at ebus0 addr 0-41 not configured
"i2c" at ebus0 addr 80-81 ivec 0x7c1 not configured
"power" at ebus0 addr e0-e1 ivec 0x7c3 not configured
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"ppm" at mainbus0 not configured
ural0 at uhub0 port 2 "ASUS 802.11g WLAN Drive" rev 2.00/0.01 addr 2
ural0: MAC/BBP RT2570 (rev 0x03), RF RT2526, address 00:17:31:00:79:64
uhub7 at uhub0 port 7 "vendor 0x0424 product 0x2502" rev 2.00/0.01 addr 3
uhidev0 at uhub2 port 1 configuration 1 interface 0 "vendor 0x1267 PS/2+USB
Mouse" rev 1.10/51.15 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhub8 at uhub2 port 2 "vendor 0x0430 product 0x100e" rev 2.00/1.03 addr 3
uhidev1 at uhub8 port 4 configuration 1 interface 0 "vendor 0x0430 Sun USB
Keyboard" rev 2.00/1.03 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd0 at ukbd0: console keyboard, using wsdisplay0
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@1,0/pci@0,0/ide@1f,0/cdrom@0,0:f
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
rebooting

console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 5.4-current (GENERIC) #46: Mon Sep 30 01:06:52 MDT 2013
    [email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1040932864 (992MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Ultra 45 Workstation
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external
(64 b/l)
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci2 at pci3 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
auacer0 at pci3 dev 29 function 0 "Acer Labs M5455 Audio" rev 0x21: ivec
0x785
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auacer0
alipm0 at pci3 dev 30 function 1 "Acer Labs M7101 Power" rev 0x00: can't
map i/o space
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-85JS, F100> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xaa
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
pci5 at ppb4 bus 7
bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x796, address 00:14:4f:23:88:f4
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x797, address 00:14:4f:23:88:f5
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb5 at pci1 dev 3 function 0 "PLX PEX 8532" rev 0xaa: msi
pci6 at ppb5 bus 8
ppb6 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xaa: msi
pci7 at ppb6 bus 9
ppb7 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xaa
pci8 at ppb7 bus 10
ppb8 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci9 at ppb8 bus 11
mpi0 at pci9 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
scsibus2 at mpi0: 63 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, HITACHI HDS7225S, A9CA> SCSI3 0/direct
fixed naa.5000cca20cc2c85e
sd0: 238471MB, 512 bytes/sector, 488390625 sectors
ppb9 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci10 at ppb9 bus 12
uhci0 at pci10 dev 1 function 0 "VIA VT83C572 USB" rev 0x61: ivec 0x78b
uhci1 at pci10 dev 1 function 1 "VIA VT83C572 USB" rev 0x61: ivec 0x78c
ehci1 at pci10 dev 1 function 2 "VIA VT6202 USB" rev 0x63: ivec 0x78d
usb4 at ehci1: USB revision 2.0
uhub4 at usb4 "VIA EHCI root hub" rev 2.00/1.00 addr 1
radeondrm0 at pci10 dev 2 function 0 "ATI Radeon VE" rev 0x00: ivec 0x790
drm0 at radeondrm0
usb5 at uhci0: USB revision 1.0
uhub5 at usb5 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci1: USB revision 1.0
uhub6 at usb6 "VIA UHCI root hub" rev 1.00/1.00 addr 1
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 255
pyro1: dvma map c0000000-ffffffff
pci11 at pyro1
ebus0 at mainbus0
"flashprom" at ebus0 addr 0-1fffff not configured
rtc0 at ebus0 addr 100000-10000f: bq4802
com0 at ebus0 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
com1 at ebus0 addr 0-7 ivec 0x7c8: ns16550a, 16 byte fifo
"env-monitor" at ebus0 addr 0-41 not configured
pcfiic0 at ebus0 addr 80-81 ivec 0x7c1
iic0 at pcfiic0
"pca9556" at iic0 addr 0x18 not configured
lmtemp0 at iic0 addr 0x2b: lm76
lmtemp1 at iic0 addr 0x48: lm76, fails to respond
lmtemp2 at iic0 addr 0x4f: lm76
"adt7462" at iic0 addr 0x58 not configured
power0 at ebus0 addr e0-e1 ivec 0x7c3
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"ppm" at mainbus0 not configured
ural0 at uhub0 port 2 "ASUS 802.11g WLAN Drive" rev 2.00/0.01 addr 2
ural0: MAC/BBP RT2570 (rev 0x03), RF RT2526, address 00:17:31:00:79:64
uhub7 at uhub0 port 7 "Standard Microsystems product 0x2502" rev 2.00/0.01
addr 3
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Raptor Gaming PS/2+USB
Mouse" rev 1.10/51.15 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub8 at uhub2 port 2 "Fujitsu Component product 0x100e" rev 2.00/1.03 addr
3
uhidev1 at uhub8 port 4 configuration 1 interface 0 "Fujitsu Component Type
7 Keyboard" rev 2.00/1.03 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0: console keyboard
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@9,0/pci@0,0/scsi@1,0/disk@0,0
root on sd0a (2d2ac1ff7feb117c.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (RV100 0x1002:0x5159 0x1002:0x0908).
BIOS signature incorrect 0 0
drm: Using generic clock info
radeondrm0: VRAM: 128M 0x0000000008000000 - 0x000000000FFFFFFF (64M used)
radeondrm0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
ttm_pool_mm_shrink_init stub
drm: PCI GART of 512M enabled (table at 0x00000000C00E2000).
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load
firmware "radeon-r100_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
error: [drm:pid0:r100_startup] *ERROR* failed initializing CP (-2).
error: [drm:pid0:r100_init] *ERROR* Disabling GPU acceleration
drm: radeon: cp finalized
drm: Connector Table: 1 (generic)
drm: No TMDS info found in BIOS
drm: No TV DAC info found in BIOS
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, sun emulation), using wskbd0
wsmouse0 detached
ums0 detached
uhidev0 detached
ehci_idone: ex=0x40001382800 is done!
ehci_idone: ex=0x40001382800 is done!
ehci_idone: ex=0x40001382800 is done!
ehci_idone: ex=0x40001382800 is done!
syncing disks... done
rebooting

console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 5.4-current (GENERIC) #0: Thu Oct 17 12:06:00 SAST 2013
    [email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1040982016 (992MB)
mainbus0 at root: Sun Ultra 45 Workstation
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external
(64 b/l)
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci2 at pci3 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
auacer0 at pci3 dev 29 function 0 "Acer Labs M5455 Audio" rev 0x21: ivec
0x785
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auacer0
alipm0 at pci3 dev 30 function 1 "Acer Labs M7101 Power" rev 0x00: can't
map i/o space
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-85JS, F100> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xaa
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
pci5 at ppb4 bus 7
bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x796, address 00:14:4f:23:88:f4
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x797, address 00:14:4f:23:88:f5
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb5 at pci1 dev 3 function 0 "PLX PEX 8532" rev 0xaa: msi
pci6 at ppb5 bus 8
ppb6 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xaa: msi
pci7 at ppb6 bus 9
ppb7 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xaa
pci8 at ppb7 bus 10
ppb8 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci9 at ppb8 bus 11
mpi0 at pci9 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
scsibus1 at mpi0: 63 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HDS7225S, A9CA> SCSI3 0/direct
fixed naa.5000cca20cc2c85e
sd0: 238471MB, 512 bytes/sector, 488390625 sectors
ppb9 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci10 at ppb9 bus 12
uhci0 at pci10 dev 1 function 0 "VIA VT83C572 USB" rev 0x61: ivec 0x78b
uhci1 at pci10 dev 1 function 1 "VIA VT83C572 USB" rev 0x61: ivec 0x78c
ehci1 at pci10 dev 1 function 2 "VIA VT6202 USB" rev 0x63: ivec 0x78d
usb4 at ehci1: USB revision 2.0
uhub4 at usb4 "VIA EHCI root hub" rev 2.00/1.00 addr 1
radeondrm0 at pci10 dev 2 function 0 "ATI Radeon VE" rev 0x00: ivec 0x790
drm0 at radeondrm0
usb5 at uhci0: USB revision 1.0
uhub5 at usb5 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci1: USB revision 1.0
uhub6 at usb6 "VIA UHCI root hub" rev 1.00/1.00 addr 1
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 255
pyro1: dvma map c0000000-ffffffff
pci11 at pyro1
ebus0 at mainbus0
"flashprom" at ebus0 addr 0-1fffff not configured
rtc0 at ebus0 addr 100000-10000f: bq4802
com0 at ebus0 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
com1 at ebus0 addr 0-7 ivec 0x7c8: ns16550a, 16 byte fifo
"env-monitor" at ebus0 addr 0-41 not configured
pcfiic0 at ebus0 addr 80-81 ivec 0x7c1
iic0 at pcfiic0
"pca9556" at iic0 addr 0x18 not configured
lmtemp0 at iic0 addr 0x2b: lm76
lmtemp1 at iic0 addr 0x48: lm76, fails to respond
lmtemp2 at iic0 addr 0x4f: lm76
"adt7462" at iic0 addr 0x58 not configured
power0 at ebus0 addr e0-e1 ivec 0x7c3
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"ppm" at mainbus0 not configured
ural0 at uhub0 port 2 "ASUS 802.11g WLAN Drive" rev 2.00/0.01 addr 2
ural0: MAC/BBP RT2570 (rev 0x03), RF RT2526, address 00:17:31:00:79:64
uhub7 at uhub0 port 7 "Standard Microsystems product 0x2502" rev 2.00/0.01
addr 3
uhub8 at uhub2 port 2 "Fujitsu Component product 0x100e" rev 2.00/1.03 addr
2
uhidev0 at uhub8 port 4 configuration 1 interface 0 "Fujitsu Component Type
7 Keyboard" rev 2.00/1.03 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0: console keyboard
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@9,0/pci@0,0/scsi@1,0/disk@0,0
root on sd0a (2d2ac1ff7feb117c.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (RV100 0x1002:0x5159 0x1002:0x0908).
BIOS signature incorrect 0 0
drm: Using generic clock info
radeondrm0: VRAM: 128M 0x0000000008000000 - 0x000000000FFFFFFF (64M used)
radeondrm0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
ttm_pool_mm_shrink_init stub
drm: PCI GART of 512M enabled (table at 0x00000000C00E2000).
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load
firmware "radeon-r100_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
error: [drm:pid0:r100_startup] *ERROR* failed initializing CP (-2).
error: [drm:pid0:r100_init] *ERROR* Disabling GPU acceleration
drm: radeon: cp finalized
drm: Connector Table: 1 (generic)
drm: No TMDS info found in BIOS
drm: No TV DAC info found in BIOS
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, sun emulation), using wskbd0
syncing disks... done
rebooting

console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 5.4-current (GENERIC) #0: Thu Oct 17 12:06:00 SAST 2013
    [email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1040982016 (992MB)
mainbus0 at root: Sun Ultra 45 Workstation
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external
(64 b/l)
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci2 at pci3 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
auacer0 at pci3 dev 29 function 0 "Acer Labs M5455 Audio" rev 0x21: ivec
0x785
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auacer0
alipm0 at pci3 dev 30 function 1 "Acer Labs M7101 Power" rev 0x00: can't
map i/o space
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-85JS, F100> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xaa
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
pci5 at ppb4 bus 7
bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x796, address 00:14:4f:23:88:f4
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x797, address 00:14:4f:23:88:f5
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb5 at pci1 dev 3 function 0 "PLX PEX 8532" rev 0xaa: msi
pci6 at ppb5 bus 8
ppb6 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xaa: msi
pci7 at ppb6 bus 9
ppb7 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xaa
pci8 at ppb7 bus 10
ppb8 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci9 at ppb8 bus 11
mpi0 at pci9 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
scsibus1 at mpi0: 63 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HDS7225S, A9CA> SCSI3 0/direct
fixed naa.5000cca20cc2c85e
sd0: 238471MB, 512 bytes/sector, 488390625 sectors
ppb9 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci10 at ppb9 bus 12
uhci0 at pci10 dev 1 function 0 "VIA VT83C572 USB" rev 0x61: ivec 0x78b
uhci1 at pci10 dev 1 function 1 "VIA VT83C572 USB" rev 0x61: ivec 0x78c
ehci1 at pci10 dev 1 function 2 "VIA VT6202 USB" rev 0x63: ivec 0x78d
usb4 at ehci1: USB revision 2.0
uhub4 at usb4 "VIA EHCI root hub" rev 2.00/1.00 addr 1
radeondrm0 at pci10 dev 2 function 0 "ATI Radeon VE" rev 0x00: ivec 0x790
drm0 at radeondrm0
usb5 at uhci0: USB revision 1.0
uhub5 at usb5 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci1: USB revision 1.0
uhub6 at usb6 "VIA UHCI root hub" rev 1.00/1.00 addr 1
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 255
pyro1: dvma map c0000000-ffffffff
pci11 at pyro1
ebus0 at mainbus0
"flashprom" at ebus0 addr 0-1fffff not configured
rtc0 at ebus0 addr 100000-10000f: bq4802
com0 at ebus0 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
com1 at ebus0 addr 0-7 ivec 0x7c8: ns16550a, 16 byte fifo
"env-monitor" at ebus0 addr 0-41 not configured
pcfiic0 at ebus0 addr 80-81 ivec 0x7c1
iic0 at pcfiic0
"pca9556" at iic0 addr 0x18 not configured
lmtemp0 at iic0 addr 0x2b: lm76
lmtemp1 at iic0 addr 0x48: lm76, fails to respond
lmtemp2 at iic0 addr 0x4f: lm76
"adt7462" at iic0 addr 0x58 not configured
power0 at ebus0 addr e0-e1 ivec 0x7c3
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"ppm" at mainbus0 not configured
ural0 at uhub0 port 2 "ASUS 802.11g WLAN Drive" rev 2.00/0.01 addr 2
ural0: MAC/BBP RT2570 (rev 0x03), RF RT2526, address 00:17:31:00:79:64
uhub7 at uhub0 port 7 "Standard Microsystems product 0x2502" rev 2.00/0.01
addr 3
uhub8 at uhub2 port 2 "Fujitsu Component product 0x100e" rev 2.00/1.03 addr
2
uhidev0 at uhub8 port 4 configuration 1 interface 0 "Fujitsu Component Type
7 Keyboard" rev 2.00/1.03 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0: console keyboard
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@9,0/pci@0,0/scsi@1,0/disk@0,0
root on sd0a (2d2ac1ff7feb117c.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (RV100 0x1002:0x5159 0x1002:0x0908).
BIOS signature incorrect 0 0
drm: Using generic clock info
radeondrm0: VRAM: 128M 0x0000000008000000 - 0x000000000FFFFFFF (64M used)
radeondrm0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
ttm_pool_mm_shrink_init stub
drm: PCI GART of 512M enabled (table at 0x00000000C00E2000).
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load
firmware "radeon-r100_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
error: [drm:pid0:r100_startup] *ERROR* failed initializing CP (-2).
error: [drm:pid0:r100_init] *ERROR* Disabling GPU acceleration
drm: radeon: cp finalized
drm: Connector Table: 1 (generic)
drm: No TMDS info found in BIOS
drm: No TV DAC info found in BIOS
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, sun emulation), using wskbd0

KR
Dusty