Re: sparc64 7.0 install CD does not boot on V240

We believe this problem is fixed in -current, and will be fixed in 7.1

Therefore would appreciate if you test the snapshot.


Pekka Niiranen <[email protected]> wrote:

> I can confirm this problem:
> The Sun Ultra 45 boots from v6.8 CD fine, but not from v7.0 CD
> (install70.iso or cd70.iso)
>=20
> > Can't read disk label.
>=20
> I was able to install only from USB disk.
>=20
> - Pekka -
>=20
> On 1.2.2022 15.42, David Savolainen wrote:
> > Sparc64 7.0 full install CD (install70.iso) does not boot on my Sun
> > V240.=C2=A0 This includes the original release and the 1/31 snapshot.=
=C2=A0
> > Here is the output when attempting to boot from the 1/31 snapshot:
> > Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f=C2=A0 File and args:
> > OpenBSD IEEE 1275 Bootblock 2.1
> > ..>> OpenBSD BOOT 1.22
> > Can't read disk label.
> > Can't open disk label package
> > Trying bsd...
> > Booting /pci@1e,600000/ide@d/cdrom@0,0:f/bsd
> > 4130216@0x1000000+6744@0x13f05a8+3236812@0x1c00000+957492@0x1f163cc
> > OF_map_phys(3fe44000,8192,fed58000,-1) failed
> > no space for symbol table
> > Program terminated
> > {1} ok
> > The last OpenBSD to run on this machine is 6.6
> > David Savolainen
> >=20
>=20
>=20