laptop
"D. E. Evans" <[email protected]>
| Newsgroups | gmane.os.openbsd.www |
|---|---|
| Message-ID | <[email protected]> |
Here's one for your laptop page: Toshiba Satellite A35-S1593 OpenBSD 3.8 The following do not work: Modem (detects, but is a winmodem) Detects as ENE CB-1410 CardBus, but gives 'rev 0x01pci_intr_map: no mapping for pin A' I have not tested the APM support. Audio, DVD/CD-RW, X11, ethernet, mouse, keyboard, and USB all seem to work fine. I do not have the internal wireless card to test it. Feel free to list my contact information as: Sinuhe <[email protected]> Following is the dmesg and xorg.conf: OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(R) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID real mem = 770154496 (752104K) avail mem = 695369728 (679072K) using 4278 buffers containing 38608896 bytes (37704K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(ca) BIOS, date 10/31/03, BIOS32 rev. 0 @ 0xfd750 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xfd750/0x8b0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xce00 0xcd000/0x1000 0xdf000/0x1000! 0xe0000/0x4000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02 "Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured "Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at 0xe8000000, size 0x8000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 9 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 9 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 9 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83 pci1 at ppb0 bus 1 rl0 at pci1 dev 1 function 0 "Realtek 8139" rev 0x10: irq 9 address 00:02:3f:ce:8c:30 rlphy0 at rl0 phy 0: RTL internal phy cbb0 at pci1 dev 4 function 0 "ENE CB-1410 CardBus" rev 0x01pci_intr_map: no mapping for pin A : couldn't map interrupt ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03: SpeedStep pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <IC25N040ATMR04-0> wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R2412, 1015> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 "Intel 82801DB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 10, ICH4 AC97 ac97: codec id 0x414c4740 (Avance Logic ALC202) ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D audio0 at auich0 "Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384 pcic0 controller 0: <Intel 82365SL rev 2> has socket A only pcmcia0 at pcic0 controller 0 socket 0 pcic0: irq 3, polling enabled biomask ef75 netmask ef75 ttymask ffff pctr: user-level cycle counter enabled dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 Xorg.conf: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/TTF/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/local/lib/metamail/fonts/" EndSection Section "Module" Load "dbe" Load "extmod" Load "glx" Load "record" Load "xtrap" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "wsmouse" Option "Device" "/dev/wsmouse" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # <i> #Option "PageFlip" # [<bool>] Identifier "Card0" Driver "i810" VendorName "Intel Corp." BoardName "82852/855GM Integrated Graphics Device" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "DRI" Group 0 EndSection