i386-laptop: Acer TravelMate 4654 LMi

Acer TravelMate 4654LMi
 - OpenBSD 3.8 works
 - CPU: Intel Pentium M processor 760, 2Mb L2 cache (2.0Ghz)
 - DVD-RW: works (burning is not tested, reading both CD and DVD is ok)
 - Touchpad: works
 - USB: works (tested with cheap external card reader)
 - Ethernet: Broadcom BCM5788 10/100/1G works (1G is not tested)
 - Graphics: nVidia GeForce Go 6600, works with resolution 1400x1050x24
 - Sound: works
 - Not all functional keys are workable
 - Bluetooth, IrDA, internal modem: not tested
 - Firewire: not tested
 - APM: doesn't work (cannot open device file `/dev/apmctl': Device not
configured)
 - Wi-Fi: iwi doesn't work. Can't enable radio transmitter using button
on front panel
 - Card reader: doesn't work
 - PCMCIA: doesn't work (tested with ORINOCO wi-fi *wi* card that is
working on old OpenBSD 3.5 server - not a laptop)

-- 
%cat ~/doc/personal.txt
mailto: [email protected]         JID: [email protected]
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 1500 MHz (1356 mV) (not in table)
real mem  = 536317952 (523748K)
avail mem = 482467840 (471160K)
using 4278 buffers containing 26918912 bytes (26288K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(62) BIOS, date 07/12/04, BIOS32 rev. 0 @ 0xea800
pcibios0 at bios0: rev 2.1 @ 0xe6000/0x6f9
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/288 (16 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf400! 0xdd000/0x1400! 0xe0000/0x2000! 0xe5000/0x1000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 915GM/PM/GMS Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 915PM/GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "Nvidia", unknown product 0x0148 rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 11
ehci0: reset timeout
ehci0: init failed, error=13
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 4
"Texas Instruments TSB43AB21 FireWire" rev 0x00 at pci4 dev 0 function 0 not configured
bge0 at pci4 dev 1 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3 (0x3003): irq 11 address 00:0f:b0:81:25:f2
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11, address 00:12:f0:d2:60:bb
cbb0 at pci4 dev 4 function 0 vendor "ENE", unknown product 0x1412 rev 0x10pci_intr_map: no mapping for pin A
: couldn't map interrupt
vendor "ENE", unknown product 0x0530 (class memory subclass flash, rev 0x01) at pci4 dev 4 function 1 not configured
vendor "ENE", unknown product 0x0550 (class system unknown subclass 0x05, rev 0x01) at pci4 dev 4 function 2 not configured
vendor "ENE", unknown product 0x0520 (class memory subclass flash, rev 0x01) at pci4 dev 4 function 3 not configured
vendor "ENE", unknown product 0x0551 (class memory subclass flash, rev 0x01) at pci4 dev 4 function 4 not configured
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x04: irq 5, ICH6 AC97
ac97: codec id 0x414c4752 (Avance Logic ALC250A?)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x04 at pci0 dev 30 function 3 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM IDE" rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-L632B, TI31> SCSI0 5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd0 at pciide0 channel 1 drive 0: <ST9100822A>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801FB SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt1 at isa0 port 0x278/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 2> has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcic0: irq 4, polling enabled
biomask efc5 netmask efc5 ttymask ffd7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Section "ServerLayout"
	Identifier     "Acer TravelMate 4654 LMi"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "wsmouse"
	Option	    "Device" "/dev/wsmouse"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier	"Monitor0"
	VendorName	"Acer"
	ModelName	"laptop monitor"
	HorizSync	31 - 90
	VertRefresh	50.0 - 90.0
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "nv"
	VendorName  "nVidia Corporation"
	ChipSet     "GeForce Go 6600"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier	"Screen0"
	Device		"Card0"
	Monitor		"Monitor0"
	DefaultDepth	24
	SubSection "Display"
		Depth	24
		Modes	"1400x1050"
	EndSubSection
EndSection