OpenBSD on a laptop on your list

Anonymous Troll <[email protected]>
Newsgroups gmane.os.openbsd.www
Message-ID <[email protected]>
Laptops is an Averatec 3250 running KDE :

dmesg:

# dmesg
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: mobile AMD Athlon(tm) XP-M (LV) 2200+ ("AuthenticAMD" 686-class, 512KB
L2 cache) 1.66 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,S
SE
cpu0: AMD Powernow: FID VID TTP
real mem  = 502833152 (491048K)
avail mem = 451698688 (441112K)
using 4278 buffers containing 25243648 bytes (24652K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 08/04/04, BIOS32 rev. 0 @ 0xfdb30
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79f0/160 (8 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3177
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc200 0xcca00/0x1800 0xe0000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01: aperture at
0xd8000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ral0 at pci0 dev 9 function 0 "Ralink RT2560" rev 0x01: irq 11, address
00:11:09:0e:05:c7
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
cbb0 at pci0 dev 10 function 0 "O2 Micro OZ69[17]2 CardBus" rev
0x20pci_intr_map: no mapping for pin A
: couldn't map interrupt
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80pci_intr_map: no
mapping for pin A
: couldn't map interrupt
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80pci_intr_map: no
mapping for pin B
: couldn't map interrupt
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80pci_intr_map: no
mapping for pin C
: couldn't map interrupt
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82pci_intr_map: no
mapping for pin D
: couldn't map interrupt
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N080ATMR04-0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Slimtype, DVDRW SOSW-852S, PSD1> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
"VIA VT82C686 Modem" rev 0x80 at pci0 dev 17 function 6 not configured
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11 address
00:40:45:25:ee:23
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063, model 0x0032, rev. 8
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 3, polling enabled
biomask e3f5 netmask ebf5 ttymask fbff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Here is xorg.conf

# more xorg.conf
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
        FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath   "/usr/local/lib/X11/fonts/ghostscript/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"

EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "glx"
        Load  "record"
        Load  "xtrap"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option      "CoreKeyboard"
        Option      "XkbModel" "pc105"
        Option      "XkbRules" "xorg"
        Option      "XkbLayout" "us"

EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "wsmouse"
        Option      "Device" "/dev/wsmouse"
        Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync    31.5 - 57.0
        VertRefresh  50.0 - 90.0
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "DefaultRefresh"            # [<bool>]
        Identifier  "Card0"
        Driver      "vesa"
        VendorName  "Unknown Vendor"
        BoardName   "Unknown Board"
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes   "1024x786"
        EndSubSection
EndSection




*

Specifications
*



  Processor: AMD Athlon XP-M 2200+ (1.67 GHz)  Operating System: OpenBSD 3.8
<http://www.notebookreview.com/default.asp?newsID=2145&review=Averatec+3250HS
#>
Display: 12.1 inch 1024 x 768 XGA LCD; S3 Unichrome display controller /w
shared video memory Memory: 512 MB PC2700 (333 MHz) DDR RAM Storage: 80 GB
4200 RPM 9.5mm Hitachi Travelstar hard drive Optical Drive: QSI SDW-042 dual
format 4x/2x DVD RW drive Size & Weight: 10.9 inches wide x 9.6 inches deep
x 1.0 inch thick, 4.4 pounds Expansion: 1x CardBus slot, 1x VGA out, 1x RJ45
ethernet, 1x RJ11 modem, 3x USB 2.0 ports Docking: No docking
connector Communication:


Integrated 802.11g WiFi, 10/100 ethernet, 56k modem
 Audio: 1x headphone jack, 1x microphone jack, internal stereo speakers
Input: Standard keyboard, touchpad Battery: 44 watt-hour (11.1 volt,
4.0amp-hour) Lithium Ion battery

Feel free to contact:  [email protected]
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.