toshiba libretto u100 for i386-laptop.html

"Sebastian Reitenbach" <[email protected]>
Newsgroups gmane.os.openbsd.www
Organization L00 bugdead prods.
Message-ID <[email protected]>
Manufacturer: 	Toshiba 
Model: 		Libretto U100
Size:  		much like a good old VHS Cassette
Running:	OpenBSD latest cvs ckeckout from 15.01.2007
Contact:	Sebastian Reitenbach <[email protected]>

Hardware: 
Processor: 		cpu0: Intel(R) Pentium(R) M processor 1.20GHz ("GenuineIntel" 
686-class) 1.20 GHz
Memory:			real mem  = 518942720 (506780K)
Graphics:		vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP"
WLAN:			ath0 at pci1 dev 5 function 0 "Atheros AR5212"
                        ath0: AR5213 7.9 phy 4.5 rf2112a 5.6, WOR4W, address 
00:11:f5:83:9e:f4
USB2:
Harddisk:		TOSHIBA MK6006GAH (60GB IDE)
Display:			1280x1050px, 
Sound:			auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: 
irq 11, ICH4 AC97
			ac97: codec id 0x41445374 (Analog Devices AD1981B)
			ac97: codec features headphone, 20 bit DAC, No 3D Stereo
DVD Writer in Docking Station: works well, as USB Mass storage
Cardbus Slot:		Working well
Ethernet:		100MBit Intel card, working well
Bluetooth:              untested

Not working Hardware:
FireWire:  		device not configured
WLAN:      		device does not associate to a network
Modem:   		"Intel 82801DB Modem"
Thumbprint reader:      device not configured
SD-Card Slot:		Available, but untested
External Monitor:	via an adapter cable, available but untested

for more take a look at the dmesg, at the link below.


ACPI is recognized
# sysctl hw.sensors
hw.sensors.acpibat0.volt0=10.80 VDC (voltage), OK
hw.sensors.acpibat0.volt1=11.40 VDC (current voltage), OK
hw.sensors.acpibat0.watthour0=33.92 Wh (last full capacity)
hw.sensors.acpibat0.watthour1=0.68 Wh (warning capacity)
hw.sensors.acpibat0.watthour2=0.00 Wh (low capacity)
hw.sensors.acpibat0.watthour3=33.92 Wh (remaining capacity)
hw.sensors.acpibat0.raw0=0 (battery full), OK
hw.sensors.acpibat0.raw1=0 (rate)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpitz0.temp0=45.05 degC (zone temperature)

Link to dmesg:
https://www.l00-bugdead-prods.de/libretto.dmesg.txt

Link to xorg.conf
https://www.l00-bugdead-prods.de/libretto.xorg.conf

Link to LIBRETTO kernel config file (just only enabled ACPI)
https://www.l00-bugdead-prods.de/LIBRETTO

Link to Manual from Toshiba:
http://cdgenp01.csd.toshiba.com/content/support/downloads/PMA500125011_web.pdf
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.