Re: UPDATE: FAQ-4.9 (dmesg)

steven mestdagh <[email protected]>
Newsgroups gmane.os.openbsd.www
Message-ID <[email protected]>
J.C. Roberts [2007-02-21, 18:23:04]:
> Below is a diff to augment FAQ 4.9 in hopes of getting more dmesg's sent in and 
> making sure they are usable.
> 
> 
> --- faq/faq4.html.orig	Wed Feb 21 17:02:00 2007
> +++ faq/faq4.html	Wed Feb 21 18:14:44 2007
> @@ -2043,11 +2043,43 @@
>   [email protected]
>  </pre>
>  where <tt>[email protected]</tt> is your regular email account.
> -(or transfer the dmesg output using FTP/scp/floppydisk/carrier-pigeon/...)
>  
>  <p>
> +The methods above are much easier but if you chose not to configure mail on 
> +your OpenBSD system, you should still send your dmesg to the developers. Save 
> +your dmesg output to a text file.

How about just using /var/run/dmesg.boot ?

Maybe a short note about GENERIC.MP could be inserted into
etc/root/root.mail as well?

> +<pre>
> +$ dmesg > ~/dmesg.txt
> +</pre>
> +<p>
> +Then transfer the file (using FTP/scp/floppydisk/carrier-pigeon/...)  to the
> +system you normally use for email. 
> +
> +<p>
> +Since the dmesg output you send in is processed automatically, when using 
> +alternate email clients/systems to send in your dmesg be sure to remember the
> +following: 
> +<ul>
> +<li>Make sure your email client is configured to send messages as plain text
> +    (do not use HTML-formatted email) 
> +<li>Make sure to turn off any forced line break feature. Many email clients are 
> +    configured to insert line breaks at 72 characters/columns (the norm for
> +    mailing lists), so be sure to turn this feature off.
> +<li>Make sure your email client does not reformat messages into "text-flow" 
> +    nonsesne.
> +<li>Do not send the dmesg output as file attachement. You should
> +    cat/pipe/copy/paste the dmesg output into the body of the message.
> +</ul>
> +
> +<p>
>  <strong>NOTE</strong> - Please send only GENERIC kernel dmesgs. Custom
>  kernels that have device drivers removed are not helpful.
> +
> +<p>
> +<strong>NOTE</strong> - If you have a supported multiprocessor system and 
> +normally run the GENERIC.MP kernel, it is helpful to developers to see the dmesg
> +output of both the GENERIC kernel and the GENERIC.MP kernel, so please send both
> +of them in separate emails.
>  
>  <p>
>  Also note that the dmesgs are received on a computer using the 

Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.