OpenBSD/zaurus 4.0 Billionton CFLT2-10B 10Base-T LAN Card Supported

Yiorgos Goumenakis <[email protected]>
Newsgroups gmane.os.openbsd.www
Message-ID <[email protected]> 
Dear Sir,

I hope I am not spamming by sending this to multiple addresses.

First of all, thank you for all your time and effort on producing such a 
high quality port.

I have installed OpenBSD/zaurus 4.0 on a Sharp Zaurus SL-C3000 with the 
attached CF card Billionton CFLT2-10B 10Base-T LAN recognised from the 
installer as ne0.

Could you kindly add this information to the www/zaurus.html? I have 
attached a patch for the webpage, dmesg and ifconfig -a.

Thank you in advance for your time.

Yiorgos Goumenakis


diff

Index: zaurus.html
===================================================================
RCS file: /cvs/www/zaurus.html,v
retrieving revision 1.77
diff -u -r1.77 zaurus.html
--- zaurus.html    2007/03/19 00:47:37    1.77
+++ zaurus.html    2007/03/20 10:34:40
@@ -468,6 +468,7 @@
 <li>NE2000 compatible CF Ethernet adapters
 (<a 
href="http://www.openbsd.org/cgi-bin/man.cgi?query=ne&amp;sektion=4">ne</a>)
     <ul>
+   <li>Billionton Systems CFLT2-10B
     <li>Billionton Systems CFLT2-10N
     <li>Buffalo LPC-CF-CLT
     <li>Hawking CF686TX


dmesg

OpenBSD 4.0 (GENERIC) #88: Sun Sep 17 20:31:07 MDT 2006
    [email protected]:/usr/src/sys/arch/zaurus/compile/GENERIC
real mem  = 67108864 (65536K) 64MB
avail mem = 53280768 (52032K)
using 844 buffers containing 3457024 bytes (3376K) of memory
mainbus0 (root)
cpu0 at mainbus0: PXA27x step C-0 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB(32b/l,32way) I-cache, 32KB(32b/l,32way) wr-back-lock D-cache
pxaip0 at mainbus0: CPU clock = 416.000 MHz
pxaintc0 at pxaip0 addr 0x40d00000: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000: GPIO Controller
pxadmac0 at pxaip0 addr 0x40000000 intr 25: DMA Controller
pxaost0 at pxaip0 addr 0x40a00000
com0 at pxaip0 addr 0x40100000 intr 22: pxa2x0, 32 byte fifo
com1 at pxaip0 addr 0x40200000 intr 21: pxa2x0, 32 byte fifo
com2 at pxaip0 addr 0x40700000 intr 20: pxa2x0, 32 byte fifo (SIR)
pxaudc0 at pxaip0: USB Device Controller
ohci0 at pxaip0, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: PXA27x OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
lcd0 at pxaip0
wsdisplay0 at lcd0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1 added (std, vt100 emulation)
zkbd0 at pxaip0
wskbd0 at zkbd0: console keyboard, using wsdisplay0
scoop0 at pxaip0: PCMCIA/GPIO controller
scoop1 at pxaip0: PCMCIA/GPIO controller
pxapcic0 at pxaip0: 2 slots
pcmcia0 at pxapcic0
pcmcia1 at pxapcic0
zssp0 at pxaip0
apm0 at pxaip0
zts0 at pxaip0
wsmouse0 at zts0 mux 0
zaudio0 at pxaip0: I2C, I2S, WM8750 Audio
audio0 at zaudio0
zrc0 at pxaip0: CE-RH2 remote control
wskbd1 at zrc0 mux 1
wskbd1: connecting to wsdisplay0
clock: hz=100 stathz=64
wdc0 at pcmcia0 function 0 "HITACHI, microdrive" port 0x0/16: irq 138
wd0 at wdc0 channel 0 drive 0: <HMS360404D5CF00>
wd0: 32-sector PIO, LBA, 3906MB, 7999488 sectors
wd0(wdc0:0:0): using BIOS timings
ne0 at pcmcia1 function 0 "CF, 10Base-Ethernet, 1.0" port 0x300/32, irq 
137, address 00:10:60:f1:f6:09
boot device: wd0.
rootdev=0x1000 rrootdev=0x1000 rawdev=0x1002

ifconfig -a

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
    groups: lo
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
pflog0: flags=0<> mtu 33224
pfsync0: flags=0<> mtu 1460
    groups: carp
enc0: flags=0<> mtu 1536
ne0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    lladdr 00:10:60:f1:f6:09
    groups: egress
    media: Ethernet manual
    inet 10.10.10.4 netmask 0xffffff00 broadcast 10.10.10.255
    inet6 fe80::210:60ff:fef1:f609%ne0 prefixlen 64 scopeid 0x5
Index: zaurus.html
===================================================================
RCS file: /cvs/www/zaurus.html,v
retrieving revision 1.77
diff -u -r1.77 zaurus.html
--- zaurus.html	2007/03/19 00:47:37	1.77
+++ zaurus.html	2007/03/20 10:34:40
@@ -468,6 +468,7 @@
 <li>NE2000 compatible CF Ethernet adapters
 (<a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ne&amp;sektion=4">ne</a>)
     <ul>
+    <li>Billionton Systems CFLT2-10B
     <li>Billionton Systems CFLT2-10N
     <li>Buffalo LPC-CF-CLT
     <li>Hawking CF686TX
OpenBSD 4.0 (GENERIC) #88: Sun Sep 17 20:31:07 MDT 2006
    [email protected]:/usr/src/sys/arch/zaurus/compile/GENERIC
real mem  = 67108864 (65536K) 64MB
avail mem = 53280768 (52032K)
using 844 buffers containing 3457024 bytes (3376K) of memory
mainbus0 (root)
cpu0 at mainbus0: PXA27x step C-0 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB(32b/l,32way) I-cache, 32KB(32b/l,32way) wr-back-lock D-cache
pxaip0 at mainbus0: CPU clock = 416.000 MHz
pxaintc0 at pxaip0 addr 0x40d00000: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000: GPIO Controller
pxadmac0 at pxaip0 addr 0x40000000 intr 25: DMA Controller
pxaost0 at pxaip0 addr 0x40a00000
com0 at pxaip0 addr 0x40100000 intr 22: pxa2x0, 32 byte fifo
com1 at pxaip0 addr 0x40200000 intr 21: pxa2x0, 32 byte fifo
com2 at pxaip0 addr 0x40700000 intr 20: pxa2x0, 32 byte fifo (SIR)
pxaudc0 at pxaip0: USB Device Controller
ohci0 at pxaip0, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: PXA27x OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
lcd0 at pxaip0
wsdisplay0 at lcd0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1 added (std, vt100 emulation)
zkbd0 at pxaip0
wskbd0 at zkbd0: console keyboard, using wsdisplay0
scoop0 at pxaip0: PCMCIA/GPIO controller
scoop1 at pxaip0: PCMCIA/GPIO controller
pxapcic0 at pxaip0: 2 slots
pcmcia0 at pxapcic0
pcmcia1 at pxapcic0
zssp0 at pxaip0
apm0 at pxaip0
zts0 at pxaip0
wsmouse0 at zts0 mux 0
zaudio0 at pxaip0: I2C, I2S, WM8750 Audio
audio0 at zaudio0
zrc0 at pxaip0: CE-RH2 remote control
wskbd1 at zrc0 mux 1
wskbd1: connecting to wsdisplay0
clock: hz=100 stathz=64
wdc0 at pcmcia0 function 0 "HITACHI, microdrive" port 0x0/16: irq 138
wd0 at wdc0 channel 0 drive 0: <HMS360404D5CF00>
wd0: 32-sector PIO, LBA, 3906MB, 7999488 sectors
wd0(wdc0:0:0): using BIOS timings
ne0 at pcmcia1 function 0 "CF, 10Base-Ethernet, 1.0" port 0x300/32, irq 137, address 00:10:60:f1:f6:09
boot device: wd0.
rootdev=0x1000 rrootdev=0x1000 rawdev=0x1002
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
	groups: lo
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
pflog0: flags=0<> mtu 33224
pfsync0: flags=0<> mtu 1460
	groups: carp
enc0: flags=0<> mtu 1536
ne0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	lladdr 00:10:60:f1:f6:09
	groups: egress
	media: Ethernet manual
	inet 10.10.10.4 netmask 0xffffff00 broadcast 10.10.10.255
	inet6 fe80::210:60ff:fef1:f609%ne0 prefixlen 64 scopeid 0x5
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.