update hardware platform pages to 4.2
Lawrence Teo <[email protected]>
| Newsgroups | gmane.os.openbsd.www |
|---|---|
| Message-ID | <[email protected]> |
This diff updates the hardware platform pages (alpha.html, amd64.html, etc.) to OpenBSD 4.2. Lawrence Index: alpha.html =================================================================== RCS file: /cvs/www/alpha.html,v retrieving revision 1.218 diff -u -p -r1.218 alpha.html --- alpha.html 22 Jun 2007 11:38:45 -0000 1.218 +++ alpha.html 2 Nov 2007 23:49:59 -0000 @@ -1336,10 +1336,10 @@ available in the GENERIC kernel that wil <p> The latest supported OpenBSD/alpha release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/alpha/INSTALL.alpha"> -OpenBSD/alpha 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/alpha/INSTALL.alpha"> +OpenBSD/alpha 4.2 installation instructions </a>. <p> @@ -1367,7 +1367,7 @@ There are several installation media pro look at the <a href="http://www.openbsd.org/cgi-bin/cvsweb/src/sys/arch/alpha/conf/RAMDISKBIG?rev=HEAD">RAMDISKBIG</a> kernel configuration file. - <li><strong>Floppy A</strong> (floppy41.fs) + <li><strong>Floppy A</strong> (floppy42.fs) <p> This 1.44MB floppy image supports the following alpha hardware: <ul> @@ -1387,7 +1387,7 @@ There are several installation media pro look at the <a href="http://www.openbsd.org/cgi-bin/cvsweb/src/sys/arch/alpha/conf/RAMDISK?rev=HEAD">RAMDISK</a> kernel configuration file. - <li><strong>Floppy B</strong> (floppyB41.fs) + <li><strong>Floppy B</strong> (floppyB42.fs) <p> This 1.44MB floppy image supports the following alpha hardware: <ul> Index: amd64.html =================================================================== RCS file: /cvs/www/amd64.html,v retrieving revision 1.176 diff -u -p -r1.176 amd64.html --- amd64.html 14 Oct 2007 11:55:35 -0000 1.176 +++ amd64.html 2 Nov 2007 23:49:59 -0000 @@ -1658,10 +1658,10 @@ a custom kernel to enable it. <p> The latest supported OpenBSD/amd64 release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/amd64/INSTALL.amd64"> -OpenBSD/amd64 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/amd64/INSTALL.amd64"> +OpenBSD/amd64 4.2 installation instructions </a>. <p> @@ -1685,7 +1685,7 @@ There are several installation media pro For the latest list of drivers available on this image, take a look at the <a href="http://www.openbsd.org/cgi-bin/cvsweb/src/sys/arch/amd64/conf/RAMDISK_CD?rev=HEAD">RAMDISK_CD</a> kernel configuration file. - <li><strong>Floppy A</strong> (floppy41.fs) + <li><strong>Floppy A</strong> (floppy42.fs) <br> This 1.44MB floppy image contains the most common drivers. It is designed to cover the most typical PC. As a general rule, you will Index: armish.html =================================================================== RCS file: /cvs/www/armish.html,v retrieving revision 1.16 diff -u -p -r1.16 armish.html --- armish.html 15 May 2007 02:10:53 -0000 1.16 +++ armish.html 2 Nov 2007 23:49:59 -0000 @@ -108,10 +108,10 @@ boot from disk as well. <p> The latest supported OpenBSD/armish release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/armish/INSTALL.armish"> -OpenBSD/armish 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/armish/INSTALL.armish"> +OpenBSD/armish 4.2 installation instructions </a>. <p> Index: hp300.html =================================================================== RCS file: /cvs/www/hp300.html,v retrieving revision 1.68 diff -u -p -r1.68 hp300.html --- hp300.html 21 Jun 2007 20:27:44 -0000 1.68 +++ hp300.html 2 Nov 2007 23:50:00 -0000 @@ -294,10 +294,10 @@ More information about hardware configur <p> The latest supported OpenBSD/hp300 release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/hp300/INSTALL.hp300"> -OpenBSD/hp300 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/hp300/INSTALL.hp300"> +OpenBSD/hp300 4.2 installation instructions </a>. <p> Index: hppa.html =================================================================== RCS file: /cvs/www/hppa.html,v retrieving revision 1.210 diff -u -p -r1.210 hppa.html --- hppa.html 28 Oct 2007 21:23:04 -0000 1.210 +++ hppa.html 2 Nov 2007 23:50:00 -0000 @@ -792,10 +792,10 @@ reference website. <p> The latest supported OpenBSD/hppa release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/hppa/INSTALL.hppa"> -OpenBSD/hppa 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/hppa/INSTALL.hppa"> +OpenBSD/hppa 4.2 installation instructions </a>. </p> Index: i386.html =================================================================== RCS file: /cvs/www/i386.html,v retrieving revision 1.639 diff -u -p -r1.639 i386.html --- i386.html 14 Oct 2007 11:55:35 -0000 1.639 +++ i386.html 2 Nov 2007 23:54:06 -0000 @@ -59,8 +59,7 @@ applications will work flawlessly. <p> X Window System support is available for most graphics cards, using -either the recent X.Org (6.9.0 as of OpenBSD 4.1) server whenever possible, -or XFree86 3.3.6 servers otherwise. +the recent Xenocara server (based on X.Org 7.2 as of OpenBSD 4.2). <hr> <a name="hardware"></a> @@ -2109,10 +2108,10 @@ More details on this process can be foun <p> The latest supported OpenBSD/i386 release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/i386/INSTALL.i386"> -OpenBSD/i386 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/i386/INSTALL.i386"> +OpenBSD/i386 4.2 installation instructions </a>. <p> @@ -2137,7 +2136,7 @@ There are several installation media pro For the latest list of drivers available on this image, take a look at the <a href="http://www.openbsd.org/cgi-bin/cvsweb/src/sys/arch/i386/conf/RAMDISK_CD?rev=HEAD">RAMDISK_CD</a> kernel configuration file. - <li><strong>Floppy A</strong> (floppy41.fs) + <li><strong>Floppy A</strong> (floppy42.fs) <br> This 1.44MB floppy image contains the most common drivers. It is designed to cover the most typical PC. As a general rule, you will @@ -2146,7 +2145,7 @@ There are several installation media pro For the latest list of drivers available on this image, take a look at the <a href="http://www.openbsd.org/cgi-bin/cvsweb/src/sys/arch/i386/conf/RAMDISK?rev=HEAD">RAMDISK</a> kernel configuration file. - <li><strong>Floppy B</strong> (floppyB41.fs) + <li><strong>Floppy B</strong> (floppyB42.fs) <br> This 1.44MB floppy image contains some drivers that are missing from Floppy A. @@ -2159,7 +2158,7 @@ There are several installation media pro For the latest list of drivers available on this image, take a look at the <a href="http://www.openbsd.org/cgi-bin/cvsweb/src/sys/arch/i386/conf/RAMDISKB?rev=HEAD">RAMDISKB</a> kernel configuration file. - <li><strong>Floppy C</strong> (floppyC41.fs) + <li><strong>Floppy C</strong> (floppyC42.fs) <br> This 1.44MB floppy image contains many CardBus and PCMCIA device drivers. This media is designed for installing on laptops. Index: landisk.html =================================================================== RCS file: /cvs/www/landisk.html,v retrieving revision 1.26 diff -u -p -r1.26 landisk.html --- landisk.html 15 May 2007 02:10:53 -0000 1.26 +++ landisk.html 2 Nov 2007 23:50:00 -0000 @@ -117,10 +117,10 @@ are still many bugs to fix. <p> The latest supported OpenBSD/landisk release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/landisk/INSTALL.landisk"> -OpenBSD/landisk 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/landisk/INSTALL.landisk"> +OpenBSD/landisk 4.2 installation instructions </a>. <p> Index: mac68k.html =================================================================== RCS file: /cvs/www/mac68k.html,v retrieving revision 1.79 diff -u -p -r1.79 mac68k.html --- mac68k.html 15 May 2007 02:10:53 -0000 1.79 +++ mac68k.html 2 Nov 2007 23:50:01 -0000 @@ -204,10 +204,10 @@ subsystems. It is very likely that many <p> The latest supported OpenBSD/mac68k release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/mac68k/INSTALL.mac68k"> -OpenBSD/mac68k 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/mac68k/INSTALL.mac68k"> +OpenBSD/mac68k 4.2 installation instructions </a>. </p> Index: macppc.html =================================================================== RCS file: /cvs/www/macppc.html,v retrieving revision 1.182 diff -u -p -r1.182 macppc.html --- macppc.html 15 Oct 2007 05:43:21 -0000 1.182 +++ macppc.html 2 Nov 2007 23:50:01 -0000 @@ -1193,10 +1193,10 @@ keys on ADB (laptop) keyboards, or throu <p> The latest supported OpenBSD/macppc release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/macppc/INSTALL.macppc"> -OpenBSD/macppc 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/macppc/INSTALL.macppc"> +OpenBSD/macppc 4.2 installation instructions </a>. <p> @@ -1220,7 +1220,7 @@ There are several installation media pro procedure. Alternatively, the CD can be booted at the Open Firmware prompt, with <pre> - boot cd:,ofwboot 4.1/macppc/bsd.rd + boot cd:,ofwboot 4.2/macppc/bsd.rd </pre> <li><strong>Mac OS based boot</strong> <p> Index: mvme68k.html =================================================================== RCS file: /cvs/www/mvme68k.html,v retrieving revision 1.66 diff -u -p -r1.66 mvme68k.html --- mvme68k.html 15 May 2007 02:10:53 -0000 1.66 +++ mvme68k.html 2 Nov 2007 23:50:01 -0000 @@ -143,10 +143,10 @@ Other models may work already (MVME165, <p> The latest supported OpenBSD/mvme68k release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/mvme68k/INSTALL.mvme68k"> -OpenBSD/mvme68k 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/mvme68k/INSTALL.mvme68k"> +OpenBSD/mvme68k 4.2 installation instructions </a>. <p> Index: sparc.html =================================================================== RCS file: /cvs/www/sparc.html,v retrieving revision 1.183 diff -u -p -r1.183 sparc.html --- sparc.html 15 May 2007 02:10:53 -0000 1.183 +++ sparc.html 2 Nov 2007 23:50:01 -0000 @@ -623,10 +623,10 @@ A comprehensive list can probably not be <p> The latest supported OpenBSD/sparc release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/sparc/INSTALL.sparc"> -OpenBSD/sparc 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/sparc/INSTALL.sparc"> +OpenBSD/sparc 4.2 installation instructions </a>. </p> @@ -656,10 +656,10 @@ sun4c and sun4m, miniroot images for mac kernel configuration file. The CD can be booted off the OpenPROM prompt with <pre> - boot cdrom 4.1/sparc/bsd.rd + boot cdrom 4.2/sparc/bsd.rd </pre> </li> - <li><strong>Floppy</strong> (floppy41.fs) + <li><strong>Floppy</strong> (floppy42.fs) <p> Booting off the floppy provides a small ffs filesystem with a kernel containing drivers for the most popular devices found on SPARC machines.<br> @@ -671,7 +671,7 @@ kernel configuration file. boot floppy </pre> </li> - <li><strong>Miniroot</strong> (miniroot41.fs) + <li><strong>Miniroot</strong> (miniroot42.fs) <p> The miniroot provides the same installation environment as the bootable CD, and is intended for easy bootstrap if there is already an operating system Index: sparc64.html =================================================================== RCS file: /cvs/www/sparc64.html,v retrieving revision 1.247 diff -u -p -r1.247 sparc64.html --- sparc64.html 29 Oct 2007 19:05:47 -0000 1.247 +++ sparc64.html 2 Nov 2007 23:50:02 -0000 @@ -1136,10 +1136,10 @@ This list has been originally posted by <p> The latest supported OpenBSD/sparc64 release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/sparc64/INSTALL.sparc64"> -OpenBSD/sparc64 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/sparc64/INSTALL.sparc64"> +OpenBSD/sparc64 4.2 installation instructions </a>. <p> @@ -1169,7 +1169,7 @@ as well as network and diskless installs <pre> boot cdrom </pre> - <li><strong>Floppy A</strong> (floppy41.fs) + <li><strong>Floppy A</strong> (floppy42.fs) <p> Booting off the floppy provides a small ffs filesystem with a kernel containing supporting the following sparc64 hardware: @@ -1190,7 +1190,7 @@ as well as network and diskless installs boot floppy </pre> <p> - <li><strong>Floppy B</strong> (floppyB41.fs) + <li><strong>Floppy B</strong> (floppyB42.fs) <p> Booting off the floppy provides a small ffs filesystem with a kernel containing supporting the following sparc64 hardware: @@ -1212,7 +1212,7 @@ as well as network and diskless installs boot floppy </pre> <p> - <li><strong>Miniroot</strong> (miniroot41.fs) + <li><strong>Miniroot</strong> (miniroot42.fs) <p> The miniroot provides the same installation environment as the bootable CD, and is intended for easy bootstrap if there is already an operating system @@ -1239,7 +1239,7 @@ as well as network and diskless installs Please note that booting from floppy might not work on your machine; also, Ultra 1, 1E and 2 systems might require a PROM update (they usually don't if they are able to boot Solaris in 64bit-mode); please refer to the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/sparc64/INSTALL.sparc64">installation +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/sparc64/INSTALL.sparc64">installation notes</a> for details. <hr> Index: vax.html =================================================================== RCS file: /cvs/www/vax.html,v retrieving revision 1.68 diff -u -p -r1.68 vax.html --- vax.html 15 May 2007 02:10:53 -0000 1.68 +++ vax.html 2 Nov 2007 23:50:02 -0000 @@ -279,10 +279,10 @@ the SPXg/SPXgt options for VAXstation 40 <p> The latest supported OpenBSD/vax release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/vax/INSTALL.vax"> -OpenBSD/vax 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/vax/INSTALL.vax"> +OpenBSD/vax 4.2 installation instructions </a>. <p> Index: zaurus.html =================================================================== RCS file: /cvs/www/zaurus.html,v retrieving revision 1.85 diff -u -p -r1.85 zaurus.html --- zaurus.html 10 Aug 2007 22:33:53 -0000 1.85 +++ zaurus.html 2 Nov 2007 23:50:02 -0000 @@ -565,10 +565,10 @@ Note that it is possible to use a PCMCIA <p> The latest supported OpenBSD/zaurus release is -<a href="41.html">OpenBSD 4.1</a>. +<a href="42.html">OpenBSD 4.2</a>. Here are the -<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.1/zaurus/INSTALL.zaurus"> -OpenBSD/zaurus 4.1 installation instructions +<a href="ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/zaurus/INSTALL.zaurus"> +OpenBSD/zaurus 4.2 installation instructions </a>. <p>