Lenovo x61s - update

This is an Update to the x61s entry on the laptop website:

* OpenBSD 4.3-current (Thu May 15 23:34:00 CEST 2008) works (also 4.3)
* ACPI-only machine, no APM support
* No CPU throtteling because OpenBSD lacks support of enhanced speedstep
 - apm -C works in a limited way
   it reports wrong values and just 3 different speeds
* No suspend functionality
 - apm -z does not work
   no function key works related to any suspend method
* Video works fine without configuration
* USB 2 works fine
* em(4) ethernet works
* iwn(4) wireless works but needs unfree firmware
* Mini PCMCIA works
* Card reader works fine.
* Audio (azalia(4)) works
* Function keys do work (not all, see apm notice)
* Devices wich do not work currently:
 - Bluetooth
 - fingerprint reader
 - internal modem
 - Firewire


dmesg:

OpenBSD 4.3-current (GENERIC.MP) #0: Thu May 15 23:34:00 CEST 2008
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem  = 2103726080 (2006MB)
avail mem = 2025959424 (1932MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/15/07, BIOS32 rev. 0 @ 0xfdc80,
SMBIOS rev. 2.4 @ 0xe0010 (63 entries)
bios0: vendor LENOVO version "7NET30WW (1.11 )" date 11/15/2007
bios0: LENOVO 766655G
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF! SSDT
SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) IGBE(S4) EXP0(S4)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz ("GenuineIntel"
686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus -1 (EXP3)
acpiprt6 at acpi0: bus -1 (EXP4)
acpiprt7 at acpi0: bus 5 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "92P1163" serial  2787 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock at acpi0 not configured
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000
0xe0000/0x10000!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0615092406000924
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1800 MHz (1276 mV): speeds: 1800, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xe0000000, size 0x10000000
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 2 int
20 (irq 11), address 00:1d:72:88:a7:33
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 2 int 20
(irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 2 int 21
(irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 2 int 22
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic 2
int 17 (irq 11)
azalia0: RIRB time out
azalia0: RIRB time out
azalia0: codec[s]: Analog Devices AD1984, Conexant/0x2bfa, using Analog
Devices AD1984
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 2 int 20
(irq 11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 2 int 21
(irq 11)
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Wireless WiFi Link 4965AGN" rev 0x61:
apic 2 int 17 (irq 11), MoW2, address 00:1f:3b:47:93:cf
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 2 int 16
(irq 10)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 2 int 17
(irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 2 int 19
(irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci3 at ppb2 bus 5
cbb0 at pci3 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2 int
16 (irq 10)
"Ricoh 5C832 Firewire" rev 0x04 at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2 int
18 (irq 11)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 2 int
16 (irq 10), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS54251, BB2Z> SCSI3 0/direct
fixed
sd0: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec
total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 2
int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2
ugen1 at uhub2 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 3
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
--

This model is a base model (CTO) wich is used for customable configurations.
It should be pretty much the "base" for any of x61s models. ;-]

Also:
If anybody may has _any_ patches I could test please contact me!
Specialy for the enhanced speedstep or bluetooth but I would test other
things as well! Just send me a mail and tell me what results/feedback you
need!

The enhanced speedstep is also in use on Desktop CPUs so I could test
patches there as well! :)


Kind regards,
Sebastian