v vs V in faq12

frantisek holop <[email protected]>
Newsgroups gmane.os.openbsd.www
Message-ID <[email protected]>
i think this should really be 'V' and not 'v'.
(please cc: me i am not subscribed)


--- faq12.html.orig	Tue Mar 17 21:34:16 2009
+++ faq12.html	Tue Mar 17 21:35:10 2009
@@ -119,12 +119,12 @@
 Also, many cards with on-board bridges (such as, multi-port network
 cards) will not work well in older systems.
 
-<li>The PCI bus supports two levels of signaling, 3.3v and 5v.
-Cards that work with 3.3v signaling have a second notch cut in their
+<li>The PCI bus supports two levels of signaling, 3.3V and 5V.
+Cards that work with 3.3V signaling have a second notch cut in their
 PCI connector.
-Most PCI cards use 5v signaling, which is used by most computers.
+Most PCI cards use 5V signaling, which is used by most computers.
 The Soekris single-board computers (Net45x1 and Net4801) are
-commonly-encountered computers that only support 3.3v signaling.
+commonly-encountered computers that only support 3.3V signaling.
 
 </ul>
 
-- 
30 minutes of begging is not considered foreplay.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.