Re: intel(4) slow on G33
Matthieu Herrb <[email protected]> Sun, 02 Aug 2009 11:27:09 +0200
| Newsgroups | gmane.os.openbsd.x11 |
|---|---|
| Message-ID | <[email protected]> |
Henry Precheur wrote: > X11 is slow on my computer. I am not 100% sure, but I believe it started > when I updated OpenBSD a few weeks ago. The intel(4) driver was updated > to version 2.7.1. > > It's still usable, but it is definitly slower than before. If I hide and > show Firefox, it takes 1/2 second to redraw. > > Any advice on how I could track this problem? > > My /var/log/Xorg.0.log & dmesg are below. I don't have a xorg.conf. > > Try again with a more recent snapshot. A problem in libpixman was fixed last week. > Cheers, > > --- > /var/log/Xorg.0.log > > (--) checkDevMem: using aperture driver /dev/xf86 > (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) > > X.Org X Server 1.5.3 > Release Date: 5 November 2008 > X Protocol Version 11, Revision 0 > Build Operating System: OpenBSD 4.6 amd64 > Current Operating System: OpenBSD banane.novuscom.net 4.6 GENERIC#86 amd64 > Build Date: 23 July 2009 11:59:39AM > > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 21:38:09 2009 > (EE) Unable to locate/open config file > (II) Loader magic: 0x771560 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 4.1 > X.Org XInput driver : 2.1 > X.Org Server Extension : 1.1 > X.Org Font Renderer : 0.6 > (II) Loader running on openbsd > (--) PCI:*(0@0:2:0) Intel 82G33 Video rev 2, Mem @ 0x90300000/524288, 0x80000000/268435456, 0x90200000/1048576, I/O @ 0x00002460/8 > (==) Matched intel for the autoconfigured driver > New driver is "intel" > (==) Using default built-in configuration (30 lines) > (==) --- Start of built-in configuration --- > Section "Device" > Identifier "Builtin Default intel Device 0" > Driver "intel" > EndSection > Section "Screen" > Identifier "Builtin Default intel Screen 0" > Device "Builtin Default intel Device 0" > EndSection > Section "Device" > Identifier "Builtin Default fbdev Device 0" > Driver "fbdev" > EndSection > Section "Screen" > Identifier "Builtin Default fbdev Screen 0" > Device "Builtin Default fbdev Device 0" > EndSection > Section "Device" > Identifier "Builtin Default vesa Device 0" > Driver "vesa" > EndSection > Section "Screen" > Identifier "Builtin Default vesa Screen 0" > Device "Builtin Default vesa Device 0" > EndSection > Section "ServerLayout" > Identifier "Builtin Default Layout" > Screen "Builtin Default intel Screen 0" > Screen "Builtin Default fbdev Screen 0" > Screen "Builtin Default vesa Screen 0" > EndSection > (==) --- End of built-in configuration --- > (==) ServerLayout "Builtin Default Layout" > (**) |-->Screen "Builtin Default intel Screen 0" (0) > (**) | |-->Monitor "<default monitor>" > (**) | |-->Device "Builtin Default intel Device 0" > (==) No monitor specified for screen "Builtin Default intel Screen 0". > Using a default monitor configuration. > (**) |-->Screen "Builtin Default fbdev Screen 0" (1) > (**) | |-->Monitor "<default monitor>" > (**) | |-->Device "Builtin Default fbdev Device 0" > (==) No monitor specified for screen "Builtin Default fbdev Screen 0". > Using a default monitor configuration. > (**) |-->Screen "Builtin Default vesa Screen 0" (2) > (**) | |-->Monitor "<default monitor>" > (**) | |-->Device "Builtin Default vesa Device 0" > (==) No monitor specified for screen "Builtin Default vesa Screen 0". > Using a default monitor configuration. > (==) Not automatically adding devices > (==) Not automatically enabling devices > (==) No FontPath specified. Using compiled-in default. > (==) FontPath set to: > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > (==) ModulePath set to "/usr/X11R6/lib/modules" > (==) |-->Input Device "<default pointer>" > (==) |-->Input Device "<default keyboard>" > (==) The core pointer device wasn't specified explicitly in the layout. > Using the default mouse configuration. > (==) The core keyboard device wasn't specified explicitly in the layout. > Using the default keyboard configuration. > (II) System resource ranges: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) LoadModule: "extmod" > > (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "dbe" > > (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "glx" > > (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so > (II) Module glx: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org Server Extension, version 1.1 > (==) AIGLX enabled > (==) Exporting typical set of GLX visuals > (II) Loading extension GLX > (II) LoadModule: "freetype" > > (II) Loading /usr/X11R6/lib/modules/fonts//libfreetype.so > (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" > compiled for 1.5.3, module version = 2.1.0 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.6 > (II) Loading font FreeType > (II) LoadModule: "dri" > > (II) Loading /usr/X11R6/lib/modules/extensions//libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension XFree86-DRI > (II) LoadModule: "intel" > > (II) Loading /usr/X11R6/lib/modules/drivers//intel_drv.so > (II) Module intel: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 2.7.1 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 4.1 > (II) LoadModule: "fbdev" > > (WW) Warning, couldn't open module fbdev > (II) UnloadModule: "fbdev" > (EE) Failed to load module "fbdev" (module does not exist, 0) > (II) LoadModule: "vesa" > > (II) Loading /usr/X11R6/lib/modules/drivers//vesa_drv.so > (II) Module vesa: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 2.2.0 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 4.1 > (II) LoadModule: "mouse" > > (II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so > (II) Module mouse: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.4.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 2.1 > (II) LoadModule: "kbd" > > (II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so > (II) Module kbd: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.3.2 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 2.1 > (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, > i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, > E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, > 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, > Mobile IntelB. GM45 Express Chipset, > Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 > (II) VESA: driver for VESA chipsets: vesa > (II) Primary Device is: PCI 00@00:02:0 > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (WW) Falling back to old probe method for vesa > (II) resource ranges after probing: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > > (II) Loading /usr/X11R6/lib/modules//libvgahw.so > (II) Module vgahw: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 0.1.0 > ABI class: X.Org Video Driver, version 4.1 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Module "ramdac" already built-in > (II) intel(0): Creating default Display subsection in Screen section > "Builtin Default intel Screen 0" for depth/fbbpp 24/32 > (==) intel(0): Depth 24, (--) framebuffer bpp 32 > (==) intel(0): RGB weight 888 > (==) intel(0): Default visual is TrueColor > (II) intel(0): Integrated Graphics Chipset: Intel(R) G33 > (--) intel(0): Chipset: "G33" > (--) intel(0): Linear framebuffer at 0x80000000 > (--) intel(0): IO registers at addr 0x90300000 > (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB > (==) intel(0): Using EXA for acceleration > (II) intel(0): 2 display pipes available. > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Module "i2c" already built-in > (II) intel(0): Output VGA has no monitor section > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) intel(0): Resizable framebuffer: not available (1 3) > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. > (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): EDID vendor "SAM", prod id 627 > (II) intel(0): Using EDID range info for horizontal sync > (II) intel(0): Using EDID range info for vertical refresh > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) > (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) > (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) > (II) intel(0): Modeline "1440x900"x60.0 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync (55.9 kHz) > (II) intel(0): Modeline "1440x900"x75.0 136.49 1440 1536 1688 1936 900 901 904 940 -hsync +vsync (70.5 kHz) > (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) > (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) > (II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz) > (II) intel(0): EDID vendor "SAM", prod id 627 > (II) intel(0): Output VGA connected > (II) intel(0): Using exact sizes for initial modes > (II) intel(0): Output VGA using initial mode 1440x900 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) intel(0): detected 1024 kB GTT. > (II) intel(0): detected 7164 kB stolen memory. > (==) intel(0): video overlay key set to 0x101fe > (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) > (**) intel(0): Display dimensions: (410, 260) mm > (**) intel(0): DPI set to (89, 140) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > > (II) Loading /usr/X11R6/lib/modules//libfb.so > (II) Module fb: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "exa" > (II) LoadModule: "exa" > > (II) Loading /usr/X11R6/lib/modules//libexa.so > (II) Module exa: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 2.4.0 > ABI class: X.Org Video Driver, version 4.1 > (II) intel(0): Comparing regs from server start up to After PreInit > (II) UnloadModule: "vesa" > (II) Unloading /usr/X11R6/lib/modules/drivers//vesa_drv.so > (==) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (II) intel(0): Kernel reported 491520 total, 0 used > (II) intel(0): I830CheckAvailableMemory: 1966080 kB available > drmOpenDevice: node name is /dev/drm0 > drmOpenDevice: open result is 13, (OK) > drmOpenDevice: node name is /dev/drm0 > drmOpenDevice: open result is 13, (OK) > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > drmOpenDevice: node name is /dev/drm0 > drmOpenDevice: open result is 13, (OK) > drmOpenByBusid: drmOpenMinor returns 13 > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > (II) [drm] DRM interface version 1.2 > (II) [drm] DRM open master succeeded. > (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. > (II) intel(0): [drm] framebuffer mapped by ddx driver > (II) intel(0): [drm] added 1 reserved context for kernel > (II) intel(0): X context handle = 0x1 > (II) intel(0): [drm] installed DRM signal handler > (**) intel(0): Framebuffer compression disabled > (**) intel(0): Tiling enabled > (==) intel(0): VideoRam: 262144 KB > (II) intel(0): Attempting memory allocation with tiled buffers. > (II) intel(0): Tiled allocation successful. > (II) intel(0): [drm] Registers = 0x40002000 > (II) intel(0): [drm] ring buffer = 0x40082000 > (II) intel(0): [drm] mapped front buffer at 0x81000000, handle = 0x400a2000 > (II) intel(0): [drm] mapped back buffer at 0x85000000, handle = 0x40be2000 > (II) intel(0): [drm] mapped depth buffer at 0x86000000, handle = 0x41be2000 > (II) intel(0): [drm] mapped classic textures at 0x87000000, handle = 0x42be2000 > (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 > (II) intel(0): [dri] visual configs initialized > (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) EXA(0): Offscreen pixmap area of 35389440 bytes > (II) EXA(0): Driver registered support for the following operations: > (II) Solid > (II) Copy > (II) Composite (RENDER acceleration) > (==) intel(0): Backing store disabled > (==) intel(0): Silken mouse enabled > (II) intel(0): Initializing HW Cursor > (II) intel(0): [DRI] installation complete > (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x006ff000 (pgoffset 1791) > (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0082a000 (pgoffset 2090) > (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x0082b000 (pgoffset 2091) > (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01000000 (pgoffset 4096) > (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02000000 (pgoffset 8192) > (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x05000000 (pgoffset 20480) > (II) intel(0): xf86BindGARTMemory: bind key 6 at 0x06000000 (pgoffset 24576) > (II) intel(0): xf86BindGARTMemory: bind key 7 at 0x07000000 (pgoffset 28672) > (II) intel(0): Fixed memory allocation layout: > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) > (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) > (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) > (II) intel(0): 0x006ff000: end of stolen memory > (II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB) > (II) intel(0): 0x0082b000-0x0082bfff: HW status (4 kB) > (II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled > (II) intel(0): 0x02000000-0x041bffff: exa offscreen (34560 kB) > (II) intel(0): 0x05000000-0x05ffffff: back buffer (16384 kB) X tiled > (II) intel(0): 0x06000000-0x06ffffff: depth buffer (16384 kB) X tiled > (II) intel(0): 0x07000000-0x08ffffff: classic textures (32768 kB) > (II) intel(0): 0x10000000: end of aperture > (II) intel(0): Output configuration: > (II) intel(0): Pipe A is on > (II) intel(0): Display plane A is now enabled and connected to pipe A. > (II) intel(0): Pipe B is off > (II) intel(0): Display plane B is now disabled and connected to pipe B. > (II) intel(0): Output VGA is connected to pipe A > (II) intel(0): [drm] dma control initialized, using IRQ 11 > (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. > (II) intel(0): DPMS enabled > (==) intel(0): Intel XvMC decoder disabled > (II) intel(0): Set up textured video > (II) intel(0): Set up overlay video > (II) intel(0): direct rendering: XF86DRI Enabled > (--) RandR disabled > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (II) Initializing built-in extension XEVIE > drmOpenDevice: node name is /dev/drm0 > drmOpenDevice: open result is 14, (OK) > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > drmOpenDevice: node name is /dev/drm0 > drmOpenDevice: open result is 14, (OK) > drmOpenByBusid: drmOpenMinor returns 14 > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > (II) AIGLX: enabled GLX_MESA_copy_sub_buffer > (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control > (II) AIGLX: enabled GLX_texture_from_pixmap with driver support > (II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/i915_dri.so > (II) GLX: Initialized DRI GL provider for screen 0 > (II) intel(0): Setting screen physical size to 410 x 257 > (WW) <default pointer>: No Device specified, looking for one... > (II) <default pointer>: found Device "/dev/wsmouse" > (**) <default pointer>: Protocol: WSMouse > (**) Option "CorePointer" > (**) <default pointer>: always reports core events > (**) Option "Device" "/dev/wsmouse" > (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50 > (**) <default pointer>: ZAxisMapping: buttons 4 and 5 > (**) <default pointer>: Buttons: 9 > (**) Option "CoreKeyboard" > (**) <default keyboard>: always reports core events > (**) Option "Protocol" "standard" > (**) <default keyboard>: Protocol: standard > (--) <default keyboard>: using wscons layout us > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xorg" > (**) <default keyboard>: XkbRules: "xorg" > (**) Option "XkbModel" "pc105" > (**) <default keyboard>: XkbModel: "pc105" > (**) Option "XkbLayout" "us" > (**) <default keyboard>: XkbLayout: "us" > (**) Option "CustomKeycodes" "off" > (**) <default keyboard>: CustomKeycodes disabled > (II) evaluating device (<default pointer>) > (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE) > (II) evaluating device (<default keyboard>) > (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD) > (II) 3rd Button detected: disabling emulate3Button > > --- > dmesg > > > OpenBSD 4.6-current (GENERIC) #86: Mon Jul 27 14:59:03 MDT 2009 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 2116874240 (2018MB) > avail mem = 2042974208 (1948MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe33f0 (32 entries) > bios0: vendor Intel Corp. version "DPP3510J.86A.0517.2009.0107.2203" date 01/07/2009 > bios0: Intel Corporation DG33BU > acpi0 at bios0: rev 0 > acpi0: tables DSDT FACP APIC WDDT MCFG ASF! ASPT WDTT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT > acpi0: wakeup devices SLPB(S4) P32_(S4) ECIR(S4) UAR1(S4) ILAN(S4) PEGP(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) UHC6(S3) AZAL(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz, 1600.28 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG > cpu0: 1MB 64b/line 4-way L2 cache > cpu0: apic clock running at 202MHz > cpu at mainbus0: not configured > ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 2 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 6 (P32_) > acpiprt2 at acpi0: bus 1 (PEX0) > acpiprt3 at acpi0: bus 2 (PEX1) > acpiprt4 at acpi0: bus 3 (PEX2) > acpiprt5 at acpi0: bus 4 (PEX3) > acpiprt6 at acpi0: bus 5 (PEX4) > acpiprt7 at acpi0: bus -1 (PEX5) > acpicpu0 at acpi0: C1, PSS > acpibtn0 at acpi0: SLPB > cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1600, 1400, 1200 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > vga1 at pci0 dev 2 function 0 "Intel 82G33 Video" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0x80000000, size 0x10000000 > inteldrm0 at vga1: apic 2 int 16 (irq 11) > drm0 at inteldrm0 > "Intel 82G33 HECI" rev 0x02 at pci0 dev 3 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP C" rev 0x02: apic 2 int 20 (irq 9), address 00:1c:c0:0c:bf:23 > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq 10) > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 21 (irq 11) > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 17 (irq 9) > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 17 (irq 9) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 2 int 22 (irq 10) > azalia0: codecs: Realtek ALC888 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2 int 17 (irq 255) > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02: apic 2 int 20 (irq 255) > pci2 at ppb1 bus 2 > pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 17 (irq 9) for native-PCI interrupt > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H55N, 1.03> ATAPI 5/cdrom removable > pciide0: channel 1 ignored (not responding; disabled or no drives?) > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 2 int 18 (irq 255) > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: apic 2 int 19 (irq 255) > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 2 int 17 (irq 255) > pci5 at ppb4 bus 5 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 (irq 11) > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 19 (irq 11) > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq 10) > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 (irq 11) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > pci6 at ppb5 bus 6 > "TI TSB43AB22 FireWire" rev 0x00 at pci6 dev 3 function 0 not configured > pcib0 at pci0 dev 31 function 0 "Intel 82801IH LPC" rev 0x02 > pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 2 int 21 (irq 11) for native-PCI interrupt > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18 (irq 10) > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide2: using apic 2 int 21 (irq 11) for native-PCI interrupt > wd0 at pciide2 channel 0 drive 0: <ST3160815AS> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > -- Matthieu Herrb