Re: X fails in 4.6 for Toshiba Satellite 460CDX (fwd)
k z <[email protected]> Tue, 15 Dec 2009 23:02:55 +0900
| Newsgroups | gmane.os.openbsd.x11 |
|---|---|
| Message-ID | <[email protected]> |
On 12/15/09, beasley <[email protected]> wrote: > I reported the X problem last summer with the C&T 65555 chipset. > I was not able to find a solution that would work with the 4.6 > release, but more recent snapshots (including 12/12/2009) seem > to work well on my ancient hardware. I'm able to get good video > by just entering "startx" from a user account's command line. with recent snapshot, startx works on 305CDT (using 65555): OpenBSD 4.6-current (GENERIC) #454: Sat Dec 12 19:22:12 MST 2009 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 167 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX real mem = 33189888 (31MB) avail mem = 22069248 (21MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/26/97, BIOS32 rev. 0 @ 0xfe95a apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 100% apm0: AC on, battery charge high, estimated 2:31 hours pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8e80/96 (4 entries) pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc0000/0x9800 cpu0 at mainbus0: (uniprocessor) cpu0: F00F bug workaround installed pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Toshiba PCI" rev 0x2c vga1 at pci0 dev 4 function 0 "Chips and Technologies 65555" rev 0xc6 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ohci0 at pci0 dev 11 function 0 "NEC USB" rev 0x02: irq 11, version 1.0 "Toshiba Fast Infrared Type O" rev 0x21 at pci0 dev 17 function 0 not configured usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "NEC OHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 wdc0 at isa0 port 0x1f0/8 irq 14 wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK4310MAT> wd0: 16-sector PIO, LBA, 4126MB, 8452080 sectors wd0(wdc0:0:0): using BIOS timings wdc1 at isa0 port 0x170/8 irq 15 atapiscsi0 at wdc1 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-220EA, 7.0A> ATAPI 5/cdrom removable cd0(wdc1:0:0): using BIOS timings sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01 midi0 at sb0: <SB MIDI UART> audio0 at sb0 opl0 at sb0: model OPL3 midi1 at opl0: <SB Yamaha OPL3> wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4) audio1 at wss0 pcppi0 at isa0 port 0x61 midi2 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536 pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B pcmcia0 at pcic0 controller 0 socket 0 wi0 at pcmcia0 function 0 " , IEEE 802.11 Wireless LAN/PC Card, " port 0x400/64, irq 3 wi0: PRISM2 HWB3163 rev.A (0x8002), Firmware 0.3.0 (primary), 0.8.3 (station), address <snip> pcmcia1 at pcic0 controller 0 socket 1 ne3 at pcmcia1 function 0 "corega K.K., corega Ether PCC-TD, " port 0x300/32, irq 9, address <snip> pcic0: no irq, polling enabled biomask e945 netmask eb4d ttymask fbdf uhub1 at uhub0 port 1 "NEC hub" rev 2.00/1.00 addr 2 umodem0 at uhub1 port 2 configuration 1 interface 0 "Alcor Micro product 0x9720" rev 1.10/0.00 addr 3 umodem0: data interface 1, has no CM over data, has break umodem0: status change notification available ucom0 at umodem0 uplcom0 at uhub1 port 4 "Prolific Technology Inc. USB-Serial Controller" rev 1.10/3.00 addr 4 ucom1 at uplcom0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b (--) checkDevMem: using aperture driver /dev/xf86 (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) X.Org X Server 1.6.5 Release Date: 2009-10-11 X Protocol Version 11, Revision 0 Build Operating System: OpenBSD 4.6 i386 Current Operating System: OpenBSD 305CDT.my.domain 4.6 GENERIC#454 i386 Build Date: 11 December 2009 10:02:34AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 11 10:02:36 2007 (II) Loader magic: 0x1dc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on openbsd (--) PCI:*(0:0:4:0) 102c:00e5:1179:0001 Chips and Technologies 65555 rev 198, Mem @ 0xfd000000/16777216 (==) Using default built-in configuration (21 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default chips Device 0" Driver "chips" EndSection Section "Screen" Identifier "Builtin Default chips Screen 0" Device "Builtin Default chips Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default chips Screen 0" Screen "Builtin Default vesa Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default chips Screen 0" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default chips Device 0" (==) No monitor specified for screen "Builtin Default chips Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (1) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (==) Not automatically adding devices (==) Not automatically enabling devices (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ (==) ModulePath set to "/usr/X11R6/lib/modules" (==) |-->Input Device "<default pointer>" (==) |-->Input Device "<default keyboard>" (==) The core pointer device wasn't specified explicitly in the layout. Using the default mouse configuration. (==) The core keyboard device wasn't specified explicitly in the layout. Using the default keyboard configuration. (II) System resource ranges: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "chips" (II) Loading /usr/X11R6/lib/modules/drivers//chips_drv.so (II) Module chips: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.2.2 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "vesa" (II) Loading /usr/X11R6/lib/modules/drivers//vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.6.5, module version = 2.2.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300 (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 00@00:04:0 (WW) Falling back to old probe method for vesa (II) resource ranges after probing: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.5, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) CHIPS(0): initializing int10 (II) CHIPS(0): Primary V_BIOS segment is: 0xc000 (II) CHIPS(0): VESA BIOS detected (II) CHIPS(0): VESA VBE Version 2.0 (II) CHIPS(0): VESA VBE Total Mem: 2048 kB (II) CHIPS(0): VESA VBE OEM: CHIPS 6x555 Super VGA (II) CHIPS(0): VESA VBE OEM Software Rev: 1.0 (II) CHIPS(0): VESA VBE OEM Vendor: Chips & Technologies, Inc. (II) CHIPS(0): VESA VBE OEM Product: 6x555 Display Controller (II) CHIPS(0): VESA VBE OEM Product Rev: 2 (II) CHIPS(0): Creating default Display subsection in Screen section "Builtin Default chips Screen 0" for depth/fbbpp 24/24 (==) CHIPS(0): Depth 24, (--) framebuffer bpp 24 (II) CHIPS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) CHIPS(0): RGB weight 888 (==) CHIPS(0): Default visual is TrueColor (==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0) (==) CHIPS(0): Using HW cursor (**) CHIPS(0): Enabling linear addressing (--) CHIPS(0): base address is set at 0xFD000000. (==) CHIPS(0): IOAddress is set at 0xFD400000. (**) CHIPS(0): Using MMIO (--) CHIPS(0): VideoRAM: 2048 kByte (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) CHIPS(0): VESA VBE DDC supported (II) CHIPS(0): VESA VBE DDC Level 2 (II) CHIPS(0): VESA VBE DDC transfer in appr. 1 sec. f000:a167: 01 ILLEGAL EXTENDED X86 OPCODE! (II) CHIPS(0): VESA VBE DDC invalid (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) CHIPS(0): I2C bus "DDC" initialized. (II) CHIPS(0): Probing for DDC1 (--) CHIPS(0): TFT probed (--) CHIPS(0): LCD (--) CHIPS(0): Display Size: x=800; y=600 (--) CHIPS(0): PCI Bus (--) CHIPS(0): Internal DAC disabled (--) CHIPS(0): Using programmable clocks (--) CHIPS(0): Dot clock 0: 25.172 MHz (--) CHIPS(0): Dot clock 1: 28.325 MHz CRTclk (--) CHIPS(0): Dot clock 2: 40.090 MHz FPclk (--) CHIPS(0): Probed memory clock of 50.113 MHz (==) CHIPS(0): Min pixel clock is 1.000 MHz (--) CHIPS(0): Max pixel clock is 93.544 MHz (II) CHIPS(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz (II) CHIPS(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz (WW) CHIPS(0): Unable to estimate virtual size (II) CHIPS(0): Clock range: 1.00 to 93.54 MHz (II) CHIPS(0): Not using default mode "640x350" (vrefresh out of range) (II) CHIPS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "640x400" (vrefresh out of range) (II) CHIPS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "720x400" (vrefresh out of range) (II) CHIPS(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "640x480" (vrefresh out of range) (II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "640x480" (vrefresh out of range) (II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) (II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) (II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) (II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) (II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1152x864" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "832x624" (exceeds panel dimensions) (II) CHIPS(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) CHIPS(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "1024x768" (insufficient memory for mode) (--) CHIPS(0): Virtual size is 800x600 (pitch 800) (**) CHIPS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) CHIPS(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) CHIPS(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) CHIPS(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) CHIPS(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) CHIPS(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (==) CHIPS(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) UnloadModule: "vesa" (II) Unloading /usr/X11R6/lib/modules/drivers//vesa_drv.so (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (--) CHIPS(0): 657152 bytes off-screen memory available (II) CHIPS(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles CPU to Screen color expansion Screen to Screen color expansion Solid Horizontal and Vertical Lines Driver provided WritePixmap replacement Setting up tile and stipple cache: 11 128x128 slots 32 8x8 color expansion slots (==) CHIPS(0): Backing store disabled (II) CHIPS(0): DPMS enabled (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (WW) <default pointer>: No Device specified, looking for one... (II) <default pointer>: found Device "/dev/wsmouse" (**) <default pointer>: Protocol: WSMouse (**) Option "CorePointer" (**) <default pointer>: always reports core events (**) Option "Device" "/dev/wsmouse" (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50 (**) <default pointer>: ZAxisMapping: buttons 4 and 5 (**) <default pointer>: Buttons: 9 (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE) (**) <default pointer>: (accel) keeping acceleration scheme 1 (**) <default pointer>: (accel) filter chain progression: 2.00 (**) <default pointer>: (accel) filter stage 0: 20.00 ms (**) <default pointer>: (accel) set acceleration profile 0 (**) Option "CoreKeyboard" (**) <default keyboard>: always reports core events (**) Option "Protocol" "standard" (**) <default keyboard>: Protocol: standard (--) <default keyboard>: using wscons layout jp (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) <default keyboard>: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) <default keyboard>: XkbModel: "pc105" (**) Option "XkbLayout" "jp" (**) <default keyboard>: XkbLayout: "jp" (**) Option "CustomKeycodes" "off" (**) <default keyboard>: CustomKeycodes disabled (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD) (II) PM Event received: Power Status Change (II) PM Event received: Power Status Change (II) PM Event received: Power Status Change (II) PM Event received: Power Status Change (II) PM Event received: Power Status Change (II) PM Event received: Power Status Change (II) UnloadModule: "mouse" (II) UnloadModule: "kbd" Domain /dev/pci0: 0:0:0: Toshiba PCI 0x0000: Vendor ID: 1179 Product ID: 0601 0x0004: Command: 0006 Status ID: 2280 0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 2c 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 08 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1179 Product ID: 0001 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 0:4:0: Chips and Technologies 65555 0x0000: Vendor ID: 102c Product ID: 00e5 0x0004: Command: 0083 Status ID: 0280 0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: c6 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem 32bit addr: 0xfd000000 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1179 Product ID: 0001 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 0:11:0: NEC USB 0x0000: Vendor ID: 1033 Product ID: 0035 0x0004: Command: 0006 Status ID: 0200 0x0008: Class: 0c Subclass: 03 Interface: 10 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 40 Cache Line Size: 00 0x0010: BAR mem 32bit addr: 0xfcfff000 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1179 Product ID: 0001 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 01 Max Lat: 15 0:17:0: Toshiba Fast Infrared Type O 0x0000: Vendor ID: 1179 Product ID: 0701 0x0004: Command: 0005 Status ID: 0400 0x0008: Class: 07 Subclass: 80 Interface: 00 Revision: 21 0x000c: BIST: 00 Header Type: 00 Latency Timer: 40 Cache Line Size: 00 0x0010: BAR io addr: 0x0000ffe0 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1179 Product ID: 0001 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 --eof