Assertion failure in mesa
"Anthony J. Bentley" <[email protected]> Wed, 14 Nov 2012 02:40:56 -0700
| Newsgroups | gmane.os.openbsd.x11 |
|---|---|
| Message-ID | <[email protected]> |
Hi,
When running with a specific mupen64plus plugin on my i386 laptop, I get
an assertion failure:
assertion "0" failed: file "/usr/xenocara/lib/libGL/mesa/libmesa/../../../../dist/Mesa/src/mesa/main/ff_fragment_shader.cpp", line 197, function "translate_source"
To reproduce on my hardware:
- install the mupen64plus-extras port I just sent to ports@
- modify the mupen64plus config file ~/.config/mupen64plus/mupen64plus.cfg
to use video-arachnoid instead of video-rice
- run mupen64plus with any ROM, such as the one freely available here:
http://pouet.net/prod.php?which=56794
The emulator will display the N64 logo and then hit the assertion, sometimes
printing "Abort trap (core dumped)" afterward.
dmesg and Xorg.0.log follow...
OpenBSD 5.2-current (GENERIC.MP) #29: Mon Sep 24 18:40:41 MDT 2012
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF
real mem = 1062469632 (1013MB)
avail mem = 1034153984 (986MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/08/08, SMBIOS rev. 2.4 @ 0x3f607010 (45 entries)
bios0: vendor American Megatrends Inc. version "4.6.3" date 05/06/2010
bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-N033
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC HPET MCFG SLIC SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) PEGP(S4) MC97(S4) P0P1(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus 2 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "MS-N033
" serial
type LION
oem "MSI Corp.
"
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: IGD_
acpivout0 at acpivideo0: LCD_
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000
cpu0: Enhanced SpeedStep 1667 MHz: speeds: 1667, 1334, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102E (0x3480), apic 2 int 16, address 00:24:21:62:f5:5d
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 18
pci2 at ppb1 bus 2
"Realtek 8187SE" rev 0x22 at pci2 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD1600BEVT-2, 11.0> SCSI3 0/direct fixed naa.50014ee257e5e2de
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 6 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/58.87 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct removable serial.0bda0158114173400000
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (42f381ab5e53ab60.a) swap on sd0b dump on sd0b
run0 at uhub0 port 1 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 3
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address c8:3a:35:ce:b4:9a
[ 169.121] (--) checkDevMem: using aperture driver /dev/xf86
[ 169.150] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
[ 169.209]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 169.209] X Protocol Version 11, Revision 0
[ 169.209] Build Operating System: OpenBSD 5.2 i386
[ 169.209] Current Operating System: OpenBSD ponderosa.my.domain 5.2 GENERIC.MP#29 i386
[ 169.209] Build Date: 24 September 2012 07:34:50PM
[ 169.209]
[ 169.209] Current version of pixman: 0.26.2
[ 169.209] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 169.209] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 169.210] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 9 22:40:17 2012
[ 169.255] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[ 169.256] (==) No Layout section. Using the first Screen section.
[ 169.257] (==) No screen section available. Using defaults.
[ 169.257] (**) |-->Screen "Default Screen Section" (0)
[ 169.257] (**) | |-->Monitor "<default monitor>"
[ 169.258] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 169.258] (==) Disabling SIGIO handlers for input devices
[ 169.258] (==) Automatically adding devices
[ 169.258] (==) Automatically enabling devices
[ 169.398] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 169.398] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 169.398] (II) The server relies on wscons to provide the list of input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[ 169.406] (II) Loader magic: 0x3c022040
[ 169.406] (II) Module ABI versions:
[ 169.406] X.Org ANSI C Emulation: 0.4
[ 169.406] X.Org Video Driver: 12.0
[ 169.406] X.Org XInput driver : 16.0
[ 169.406] X.Org Server Extension : 6.0
[ 169.408] (--) PCI:*(0:0:2:0) 8086:27ae:1462:100a rev 3, Mem @ 0xdfe80000/524288, 0xc0000000/268435456, 0xdff00000/262144, I/O @ 0x0000d100/8
[ 169.408] (--) PCI: (0:0:2:1) 8086:27a6:1462:100a rev 3, Mem @ 0xdfe00000/524288
[ 169.409] (II) LoadModule: "extmod"
[ 169.460] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[ 169.463] (II) Module extmod: vendor="X.Org Foundation"
[ 169.463] compiled for 1.12.3, module version = 1.0.0
[ 169.463] Module class: X.Org Server Extension
[ 169.463] ABI class: X.Org Server Extension, version 6.0
[ 169.463] (II) Loading extension MIT-SCREEN-SAVER
[ 169.463] (II) Loading extension XFree86-VidModeExtension
[ 169.463] (II) Loading extension XFree86-DGA
[ 169.464] (II) Loading extension DPMS
[ 169.464] (II) Loading extension XVideo
[ 169.464] (II) Loading extension XVideo-MotionCompensation
[ 169.464] (II) Loading extension X-Resource
[ 169.464] (II) LoadModule: "dbe"
[ 169.466] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[ 169.469] (II) Module dbe: vendor="X.Org Foundation"
[ 169.469] compiled for 1.12.3, module version = 1.0.0
[ 169.469] Module class: X.Org Server Extension
[ 169.469] ABI class: X.Org Server Extension, version 6.0
[ 169.469] (II) Loading extension DOUBLE-BUFFER
[ 169.469] (II) LoadModule: "glx"
[ 169.471] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 169.483] (II) Module glx: vendor="X.Org Foundation"
[ 169.483] compiled for 1.12.3, module version = 1.0.0
[ 169.483] ABI class: X.Org Server Extension, version 6.0
[ 169.484] (==) AIGLX enabled
[ 169.484] (II) Loading extension GLX
[ 169.484] (II) LoadModule: "record"
[ 169.486] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[ 169.487] (II) Module record: vendor="X.Org Foundation"
[ 169.487] compiled for 1.12.3, module version = 1.13.0
[ 169.487] Module class: X.Org Server Extension
[ 169.487] ABI class: X.Org Server Extension, version 6.0
[ 169.487] (II) Loading extension RECORD
[ 169.487] (II) LoadModule: "dri"
[ 169.489] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[ 169.506] (II) Module dri: vendor="X.Org Foundation"
[ 169.506] compiled for 1.12.3, module version = 1.0.0
[ 169.506] ABI class: X.Org Server Extension, version 6.0
[ 169.506] (II) Loading extension XFree86-DRI
[ 169.507] (II) LoadModule: "dri2"
[ 169.509] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 169.510] (II) Module dri2: vendor="X.Org Foundation"
[ 169.510] compiled for 1.12.3, module version = 1.2.0
[ 169.510] ABI class: X.Org Server Extension, version 6.0
[ 169.510] (II) Loading extension DRI2
[ 169.510] (==) Matched intel as autoconfigured driver 0
[ 169.510] (==) Matched vesa as autoconfigured driver 1
[ 169.510] (==) Assigned the driver to the xf86ConfigLayout
[ 169.510] (II) LoadModule: "intel"
[ 169.511] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 169.554] (II) Module intel: vendor="X.Org Foundation"
[ 169.554] compiled for 1.12.3, module version = 2.12.0
[ 169.554] Module class: X.Org Video Driver
[ 169.554] ABI class: X.Org Video Driver, version 12.0
[ 169.554] (II) LoadModule: "vesa"
[ 169.556] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 169.557] (II) Module vesa: vendor="X.Org Foundation"
[ 169.557] compiled for 1.12.3, module version = 2.3.2
[ 169.557] Module class: X.Org Video Driver
[ 169.557] ABI class: X.Org Video Driver, version 12.0
[ 169.557] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server
[ 169.558] (II) VESA: driver for VESA chipsets: vesa
[ 169.558] (WW) Falling back to old probe method for vesa
[ 169.559] (II) Loading sub module "vgahw"
[ 169.559] (II) LoadModule: "vgahw"
[ 169.566] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[ 169.579] (II) Module vgahw: vendor="X.Org Foundation"
[ 169.579] compiled for 1.12.3, module version = 0.1.0
[ 169.579] ABI class: X.Org Video Driver, version 12.0
[ 169.579] (II) Loading sub module "ramdac"
[ 169.579] (II) LoadModule: "ramdac"
[ 169.579] (II) Module "ramdac" already built-in
[ 169.579] drmOpenDevice: node name is /dev/drm0
[ 169.579] drmOpenDevice: open result is 10, (OK)
[ 169.580] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 169.580] drmOpenDevice: node name is /dev/drm0
[ 169.580] drmOpenDevice: open result is 10, (OK)
[ 169.580] drmOpenByBusid: drmOpenMinor returns 10
[ 169.580] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 169.580] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 169.580] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 169.580] (==) intel(0): RGB weight 888
[ 169.580] (==) intel(0): Default visual is TrueColor
[ 169.599] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 169.599] (--) intel(0): Chipset: "945GME"
[ 169.599] (--) intel(0): Linear framebuffer at 0xC0000000
[ 169.599] (--) intel(0): IO registers at addr 0xDFE80000 size 524288
[ 169.600] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 169.601] (II) intel(0): No SDVO device is found in VBT
[ 169.629] (II) intel(0): 2 display pipes available.
[ 169.629] (II) Loading sub module "ddc"
[ 169.629] (II) LoadModule: "ddc"
[ 169.629] (II) Module "ddc" already built-in
[ 169.629] (II) Loading sub module "i2c"
[ 169.629] (II) LoadModule: "i2c"
[ 169.629] (II) Module "i2c" already built-in
[ 169.630] (II) intel(0): Output VGA has no monitor section
[ 169.630] (II) intel(0): Output LVDS has no monitor section
[ 169.630] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[ 169.630] (II) intel(0): Attempting to determine panel fixed mode.
[ 169.630] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
[ 169.686] (II) intel(0): EDID for output LVDS
[ 169.686] (II) intel(0): Manufacturer: CPT Model: 4c4 Serial#: 0
[ 169.686] (II) intel(0): Year: 2008 Week: 2
[ 169.686] (II) intel(0): EDID Version: 1.3
[ 169.686] (II) intel(0): Digital Display Input
[ 169.686] (II) intel(0): Max Image Size [cm]: horiz.: 23 vert.: 14
[ 169.686] (II) intel(0): Gamma: 2.20
[ 169.686] (II) intel(0): No DPMS capabilities specified
[ 169.686] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 169.686] (II) intel(0): First detailed timing is preferred mode
[ 169.686] (II) intel(0): redX: 0.571 redY: 0.345 greenX: 0.336 greenY: 0.570
[ 169.686] (II) intel(0): blueX: 0.153 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
[ 169.686] (II) intel(0): Manufacturer's mask: 0
[ 169.686] (II) intel(0): Supported detailed timing:
[ 169.686] (II) intel(0): clock: 45.0 MHz Image Size: 222 x 130 mm
[ 169.686] (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1200 h_border: 0
[ 169.686] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 609 v_blanking: 625 v_border: 0
[ 169.686] (II) intel(0): Unknown vendor-specific block f
[ 169.686] (II) intel(0): CPT
[ 169.686] (II) intel(0): CLAA102NA0A
[ 169.686] (II) intel(0): EDID (in hex):
[ 169.686] (II) intel(0): 00ffffffffffff000e14c40400000000
[ 169.686] (II) intel(0): 0212010380170e780a50759258569227
[ 169.686] (II) intel(0): 1f505400000001010101010101010101
[ 169.686] (II) intel(0): 010101010101941100b0405819203020
[ 169.686] (II) intel(0): 3600de82000000190000000f00000000
[ 169.686] (II) intel(0): 0000000000206e050f00000000fe0043
[ 169.686] (II) intel(0): 505420202020202020202020000000fe
[ 169.686] (II) intel(0): 00434c41413130324e4130412020006f
[ 169.687] (II) intel(0): EDID vendor "CPT", prod id 1220
[ 169.783] (II) intel(0): EDID for output VGA
[ 169.839] (II) intel(0): EDID for output LVDS
[ 169.839] (II) intel(0): Manufacturer: CPT Model: 4c4 Serial#: 0
[ 169.839] (II) intel(0): Year: 2008 Week: 2
[ 169.839] (II) intel(0): EDID Version: 1.3
[ 169.839] (II) intel(0): Digital Display Input
[ 169.839] (II) intel(0): Max Image Size [cm]: horiz.: 23 vert.: 14
[ 169.839] (II) intel(0): Gamma: 2.20
[ 169.839] (II) intel(0): No DPMS capabilities specified
[ 169.839] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 169.839] (II) intel(0): First detailed timing is preferred mode
[ 169.839] (II) intel(0): GTF timings supported
[ 169.839] (II) intel(0): redX: 0.571 redY: 0.345 greenX: 0.336 greenY: 0.570
[ 169.839] (II) intel(0): blueX: 0.153 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
[ 169.839] (II) intel(0): Manufacturer's mask: 0
[ 169.839] (II) intel(0): Supported detailed timing:
[ 169.839] (II) intel(0): clock: 45.0 MHz Image Size: 222 x 130 mm
[ 169.839] (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1200 h_border: 0
[ 169.839] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 609 v_blanking: 625 v_border: 0
[ 169.839] (II) intel(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz,
[ 169.839] (II) intel(0): CPT
[ 169.839] (II) intel(0): CLAA102NA0A
[ 169.839] (II) intel(0): EDID (in hex):
[ 169.839] (II) intel(0): 00ffffffffffff000e14c40400000000
[ 169.839] (II) intel(0): 0212010380170e780a50759258569227
[ 169.839] (II) intel(0): 1f505400000001010101010101010101
[ 169.839] (II) intel(0): 010101010101941100b0405819203020
[ 169.839] (II) intel(0): 3600de82000000190000000f00000000
[ 169.839] (II) intel(0): 0000000000206e050f00000000fe0043
[ 169.839] (II) intel(0): 505420202020202020202020000000fe
[ 169.840] (II) intel(0): 00434c41413130324e4130412020006f
[ 169.840] (II) intel(0): EDID vendor "CPT", prod id 1220
[ 169.840] (II) intel(0): Printing probed modes for output LVDS
[ 169.840] (II) intel(0): Modeline "1024x600"x60.0 45.00 1024 1072 1104 1200 600 603 609 625 -hsync -vsync (37.5 kHz eP)
[ 169.840] (II) intel(0): Output VGA disconnected
[ 169.840] (II) intel(0): Output LVDS connected
[ 169.840] (II) intel(0): Using exact sizes for initial modes
[ 169.840] (II) intel(0): Output LVDS using initial mode 1024x600
[ 169.840] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 170.615] (II) intel(0): detected 256 kB GTT.
[ 170.615] (II) intel(0): detected 7932 kB stolen memory.
[ 170.615] (==) intel(0): video overlay key set to 0x101fe
[ 170.615] (==) intel(0): DPI set to (96, 96)
[ 170.615] (II) Loading sub module "fb"
[ 170.615] (II) LoadModule: "fb"
[ 170.618] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 170.664] (II) Module fb: vendor="X.Org Foundation"
[ 170.664] compiled for 1.12.3, module version = 1.0.0
[ 170.664] ABI class: X.Org ANSI C Emulation, version 0.4
[ 170.664] (II) UnloadModule: "vesa"
[ 170.664] (II) Unloading vesa
[ 170.664] (==) Depth 24 pixmap format is 32 bpp
[ 170.665] (II) intel(0): Kernel reported 241152 total, 0 used
[ 170.665] (II) intel(0): I830CheckAvailableMemory: 964608 kB available
[ 170.670] (II) intel(0): [DRI2] Setup complete
[ 170.670] (II) intel(0): [DRI2] DRI driver: i915
[ 170.670] (**) intel(0): Framebuffer tiled
[ 170.670] (**) intel(0): Pixmaps tiled
[ 170.670] (**) intel(0): 3D buffers tiled
[ 170.670] (**) intel(0): SwapBuffers wait enabled
[ 170.674] (==) intel(0): VideoRam: 262144 KB
[ 170.675] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 170.677] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 170.680] (II) UXA(0): Driver registered support for the following operations:
[ 170.680] (II) solid
[ 170.680] (II) copy
[ 170.680] (II) composite (RENDER acceleration)
[ 170.680] (II) put_image
[ 170.680] (II) get_image
[ 170.680] (==) intel(0): Backing store disabled
[ 170.680] (==) intel(0): Silken mouse disabled
[ 170.681] (II) intel(0): Initializing HW Cursor
[ 171.074] (II) intel(0): Fixed memory allocation layout:
[ 171.074] (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000003f800000 physical
)
[ 171.074] (II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000003f80a000 physical
)
[ 171.075] (II) intel(0): 0x007bf000: end of stolen memory
[ 171.075] (II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
[ 171.075] (II) intel(0): 0x10000000: end of aperture
[ 171.075] (II) intel(0): BO memory allocation layout:
[ 171.075] (II) intel(0): 0x007bf000: start of memory manager
[ 171.075] (II) intel(0): 0x0fff5000: end of memory manager
[ 171.250] is lvds
[ 171.250] (II) intel(0): using SSC reference clock of 100 MHz
[ 171.270] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[ 171.650] (II) intel(0): Output configuration:
[ 171.650] (II) intel(0): Pipe A is off
[ 171.650] (II) intel(0): Display plane A is now disabled and connected to pipe A.
[ 171.650] (II) intel(0): Pipe B is on
[ 171.650] (II) intel(0): Display plane B is now enabled and connected to pipe B.
[ 171.650] (II) intel(0): Output VGA is connected to pipe none
[ 171.650] (II) intel(0): Output LVDS is connected to pipe B
[ 171.650] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 171.697] (==) intel(0): DPMS enabled
[ 171.697] (==) intel(0): Intel XvMC decoder disabled
[ 171.697] (II) intel(0): Set up textured video
[ 171.698] (II) intel(0): Set up overlay video
[ 171.699] (II) intel(0): direct rendering: DRI2 Enabled
[ 171.699] (--) RandR disabled
[ 171.699] (II) Initializing built-in extension Generic Event Extension
[ 171.699] (II) Initializing built-in extension SHAPE
[ 171.699] (II) Initializing built-in extension MIT-SHM
[ 171.699] (II) Initializing built-in extension XInputExtension
[ 171.699] (II) Initializing built-in extension XTEST
[ 171.699] (II) Initializing built-in extension BIG-REQUESTS
[ 171.699] (II) Initializing built-in extension SYNC
[ 171.699] (II) Initializing built-in extension XKEYBOARD
[ 171.699] (II) Initializing built-in extension XC-MISC
[ 171.699] (II) Initializing built-in extension SECURITY
[ 171.700] (II) Initializing built-in extension XINERAMA
[ 171.700] (II) Initializing built-in extension XFIXES
[ 171.700] (II) Initializing built-in extension RENDER
[ 171.700] (II) Initializing built-in extension RANDR
[ 171.700] (II) Initializing built-in extension COMPOSITE
[ 171.700] (II) Initializing built-in extension DAMAGE
[ 171.926] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 171.926] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 171.926] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 171.926] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 171.927] (II) AIGLX: Loaded and initialized i915
[ 171.927] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 171.938] (II) intel(0): Setting screen physical size to 270 x 158
[ 172.819] (II) config/wscons: checking input device /dev/wskbd
[ 172.819] (II) wskbd: using layout us
[ 172.820] (II) LoadModule: "kbd"
[ 172.822] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 172.832] (II) Module kbd: vendor="X.Org Foundation"
[ 172.832] compiled for 1.12.3, module version = 1.6.2
[ 172.832] Module class: X.Org XInput Driver
[ 172.832] ABI class: X.Org XInput driver, version 16.0
[ 172.832] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 172.832] (**) /dev/wskbd: always reports core events
[ 172.832] (**) /dev/wskbd: always reports core events
[ 172.833] (**) Option "Protocol" "standard"
[ 172.833] (**) Option "XkbRules" "base"
[ 172.833] (**) Option "XkbModel" "pc105"
[ 172.833] (**) Option "XkbLayout" "us"
[ 172.833] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[ 173.338] (II) config/wscons: checking input device /dev/wsmouse0
[ 173.338] (II) LoadModule: "synaptics"
[ 173.341] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[ 173.342] (II) Module synaptics: vendor="X.Org Foundation"
[ 173.342] compiled for 1.12.3, module version = 1.6.2
[ 173.342] Module class: X.Org XInput Driver
[ 173.342] ABI class: X.Org XInput driver, version 16.0
[ 173.342] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[ 173.342] (**) /dev/wsmouse0: always reports core events
[ 173.342] (**) Option "Device" "/dev/wsmouse0"
[ 174.279] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5472 resolution 99
[ 174.279] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4448 resolution 109
[ 174.279] (**) /dev/wsmouse0: always reports core events
[ 174.333] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHPAD, id 7)
[ 174.334] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant deceleration 2.5
[ 174.334] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75
[ 174.334] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.040
[ 174.334] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 174.334] (**) /dev/wsmouse0: (accel) acceleration profile 1
[ 174.334] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 174.334] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 174.775] (II) config/wscons: checking input device /dev/wsmouse
[ 174.775] (II) LoadModule: "ws"
[ 174.778] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 174.779] (II) Module ws: vendor="X.Org Foundation"
[ 174.779] compiled for 1.12.3, module version = 1.3.0
[ 174.779] Module class: X.Org XInput Driver
[ 174.779] ABI class: X.Org XInput driver, version 16.0
[ 174.779] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 174.779] (**) /dev/wsmouse: always reports core events
[ 174.779] (II) ws: /dev/wsmouse: debuglevel 0
[ 174.779] (**) Option "Device" "/dev/wsmouse"
[ 174.779] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 174.779] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 174.779] (**) ws: /dev/wsmouse: associated screen: 0
[ 174.780] (EE) ws: /dev/wsmouse: cannot open input device
[ 174.780] (EE) PreInit returned 2 for "/dev/wsmouse"
[ 174.780] (II) UnloadModule: "ws"
[130124.062] (II) AIGLX: Suspending AIGLX clients for VT switch
[131489.354] (II) AIGLX: Resuming AIGLX clients after VT switch
[131489.860] (II) intel(0): Fixed memory allocation layout:
[131489.860] (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000003f800000 physical
)
[131489.860] (II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000003f80a000 physical
)
[131489.860] (II) intel(0): 0x007bf000: end of stolen memory
[131489.860] (II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
[131489.860] (II) intel(0): 0x10000000: end of aperture
[131489.860] (II) intel(0): BO memory allocation layout:
[131489.861] (II) intel(0): 0x007bf000: start of memory manager
[131489.861] (II) intel(0): 0x0fff5000: end of memory manager
[131490.061] is lvds
[131490.061] (II) intel(0): using SSC reference clock of 100 MHz
[131490.081] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[131490.511] (II) intel(0): Output configuration:
[131490.511] (II) intel(0): Pipe A is off
[131490.511] (II) intel(0): Display plane A is now disabled and connected to pipe A.
[131490.511] (II) intel(0): Pipe B is on
[131490.511] (II) intel(0): Display plane B is now enabled and connected to pipe B.
[131490.511] (II) intel(0): Output VGA is connected to pipe none
[131490.511] (II) intel(0): Output LVDS is connected to pipe B
[131490.588] (II) intel(0): EDID vendor "CPT", prod id 1220
[131490.588] (II) intel(0): Using EDID range info for horizontal sync
[131490.588] (II) intel(0): Using EDID range info for vertical refresh
[131490.588] (II) intel(0): Printing DDC gathered Modelines:
[131490.588] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1072 1104 1200 600 603 609 625 -hsync -vsync (37.5 kHz eP)
[131490.588] (II) intel(0): EDID vendor "CPT", prod id 1220
[147947.460] (II) AIGLX: Suspending AIGLX clients for VT switch
[340815.359] (II) AIGLX: Resuming AIGLX clients after VT switch
[340815.862] (II) intel(0): Fixed memory allocation layout:
[340815.862] (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000003f800000 physical
)
[340815.862] (II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000003f80a000 physical
)
[340815.862] (II) intel(0): 0x007bf000: end of stolen memory
[340815.862] (II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
[340815.862] (II) intel(0): 0x10000000: end of aperture
[340815.862] (II) intel(0): BO memory allocation layout:
[340815.862] (II) intel(0): 0x007bf000: start of memory manager
[340815.862] (II) intel(0): 0x0fff5000: end of memory manager
[340816.041] is lvds
[340816.041] (II) intel(0): using SSC reference clock of 100 MHz
[340816.061] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[340816.441] (II) intel(0): Output configuration:
[340816.441] (II) intel(0): Pipe A is off
[340816.441] (II) intel(0): Display plane A is now disabled and connected to pipe A.
[340816.441] (II) intel(0): Pipe B is on
[340816.441] (II) intel(0): Display plane B is now enabled and connected to pipe B.
[340816.441] (II) intel(0): Output VGA is connected to pipe none
[340816.441] (II) intel(0): Output LVDS is connected to pipe B
[340816.507] (II) intel(0): EDID vendor "CPT", prod id 1220
[340816.507] (II) intel(0): Using hsync ranges from config file
[340816.507] (II) intel(0): Using vrefresh ranges from config file
[340816.507] (II) intel(0): Printing DDC gathered Modelines:
[340816.507] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1072 1104 1200 600 603 609 625 -hsync -vsync (37.5 kHz eP)
[340816.507] (II) intel(0): EDID vendor "CPT", prod id 1220