Xorg memory issues

Hi!

Looking at top on my -current System i see this (running kde):

leopold@werkel:184$ top -bd1 -U _x11
load averages:  0.44,  0.26,  0.14    08:00:09
69 processes:  1 running, 67 idle, 1 on processor

Memory: Real: 219M/394M act/tot  Free: 105M  Swap: 74M/1024M used/tot


  PID USERNAME PRI NICE  SIZE   RES STATE    WAIT     TIME    CPU COMMAND
 6544 _x11      28    0  145M  125M run      -      125:26  0.00% Xorg

leopold@werkel:185$ uptime
 8:00AM  up 5 days, 15:12, 0 users, load averages: 0.31, 0.24, 0.14
leopold@werkel:186$

..... 3 days later:

leopold@werkel:255$ top -bd 1 -U _x11
load averages:  0.08,  0.14,  0.10    12:13:08
76 processes:  1 running, 74 idle, 1 on processor

Memory: Real: 238M/408M act/tot  Free: 91M  Swap: 85M/1024M used/tot


  PID USERNAME PRI NICE  SIZE   RES STATE    WAIT     TIME    CPU COMMAND
 6544 _x11       2    0  168M  153M sleep    select 181:21  0.05% Xorg

leopold@werkel:256$ uptime
12:13PM  up 8 days, 19:24, 0 users, load averages: 0.15, 0.15, 0.10
leopold@werkel:257$ uname -a
OpenBSD werkel.rechners.lemarit.com 3.7 GENERIC#166 i386
leopold@werkel:258$

Looks like Xorg is slowly growing. Has anybody seen this too?

Alf

OpenBSD 3.7-current (GENERIC) #166: Tue May 31 20:49:08 MDT 2005
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2600+ ("AuthenticAMD" 686-class, 512KB L2 cache) 1.93 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: AMD Powernow: FID
real mem  = 536387584 (523816K)
avail mem = 482619392 (471308K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/07/03, BIOS32 rev. 0 @ 0xfdb10
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7ed0/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xd000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 746 PCI" rev 0x10
ppb0 at pci0 dev 1 function 0 "SIS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9200 SE 2nd" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon 9200 SE" rev 0x01 at pci1 dev 0 function 1 not configured
pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0x00: 746: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800LB-55DNA0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1 at pciide0 channel 0 drive 1: <ST3160021A>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, CDRW 52X32, Y.DS> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ohci0 at pci0 dev 3 function 0 "SIS 5597/5598 USB" rev 0x0f: irq 10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SIS 5597/5598 USB" rev 0x0f: irq 11, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 3 function 2 "SIS 7002 USB" rev 0x00: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: SIS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sis0 at pci0 dev 4 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 3, address 00:0b:6a:35:f4:5f
rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
siop0 at pci0 dev 11 function 0 "Symbios Logic 53c810" rev 0x12: irq 3
scsibus1 at siop0: 8 targets
emu0 at pci0 dev 13 function 0 "Creative Labs SoundBlaster Live" rev 0x0a: irq 10
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x0a at pci0 dev 13 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
biomask ef6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
umass0 at uhub2 port 1 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <IBM-DTTA, -351680, 0 0> SCSI0 0/direct fixed
sd0: 16124MB, 16124 cyl, 64 head, 32 sec, 512 bytes/sec, 33022080 sec total
umass0: at uhub2 port 1 (addr 2) disconnected
sd0 detached
scsibus2 detached
umass0 detached
umass0 at uhub2 port 1 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <IBM-DTTA, -351680, 0 0> SCSI0 0/direct fixed
sd0: 16124MB, 16124 cyl, 64 head, 32 sec, 512 bytes/sec, 33022080 sec total
umass0: at uhub2 port 1 (addr 2) disconnected
sd0 detached
scsibus2 detached
umass0 detached
umass0 at uhub2 port 1 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <IBM-DTTA, -351680, 0 0> SCSI0 0/direct fixed
sd0: 16124MB, 16124 cyl, 64 head, 32 sec, 512 bytes/sec, 33022080 sec total
umass0: at uhub2 port 1 (addr 2) disconnected
sd0 detached
scsibus2 detached
umass0 detached
umass0 at uhub2 port 1 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <IBM-DTTA, -351680, 0 0> SCSI0 0/direct fixed
sd0: 16124MB, 16124 cyl, 64 head, 32 sec, 512 bytes/sec, 33022080 sec total
umass0: at uhub2 port 1 (addr 2) disconnected
sd0 detached
scsibus2 detached
umass0 detached
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <IBM-DTTA, -351680, 0 0> SCSI0 0/direct fixed
sd0: 16124MB, 16124 cyl, 64 head, 32 sec, 512 bytes/sec, 33022080 sec total
umass0: at uhub2 port 2 (addr 2) disconnected
sd0 detached
scsibus2 detached
umass0 detached
linux: syscall chown is obsolete or not implemented (pid=26076)