RE: RE: list

Hi!
I had this problem too. Solution is simple:
Use devi-hirun driver for mouse device like that:
for PS2
/usr/photon/bin/devi-hirun -Pr ps2 mousedev
for serial mouse (I don't remeber exactly, so best if you will look into
documentation)
/usr/photon/bin/devi-hirun -Pr msoft fd -d/dev/ser1

and setup mouse in XF86Config as
Section "InputDevice"
 	Identifier  "Mouse0"
 	Driver      "mouse"
 	Option      "Device" "/dev/devi/mouse0"
 EndSection
Note: there must be no "Protocol" option - it lead to incorrect mouse work.
And once more - after running Photon mouse will not work (if you know how to
fix this e-mail me please), so you will need to reboot after using Photon.

	Regards,
	Sergey Sobolev

> -----Original Message-----
> From: openqnx-developer-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> [mailto:openqnx-developer-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org]On Behalf
> Of Sergey Uvarov (by way of Jutta Steinhoff <[email protected]>)
> Sent: Friday, March 01, 2002 16:48
> To: openqnx-developer-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> Subject: Re: [Openqnx-developer] list
>
>
>
> - just redirected to the list.  Frank, Armin had the same problem, too.
>   Jutta
>
>
> Sergey Uvarov <[email protected]> wrote:
>
> Hi,
>
> I try to start XFree86-4.1 but haven't success.
> X-server is started and is blocked. When I am moving mouse it is
> working and when I am not moving mouse all X tasks are blocked.
> if file xinitrc or $HOME/.xinitrc exist X starts and
> exits. xinitrc and $HOME/.xinitrc I make empty.
>
> How can I solve this problem?Section "ServerLayout"
> 	Identifier     "XFree86 Configured"
> 	Screen      0  "Screen0" 0 0
> 	InputDevice    "Mouse0" "CorePointer"
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> 	RgbPath      "/opt/X11R6/lib/X11/rgb"
> 	ModulePath   "/opt/X11R6/lib/modules"
> 	FontPath     "/opt/X11R6/lib/X11/fonts/misc/"
> 	FontPath     "/opt/X11R6/lib/X11/fonts/Speedo/"
> 	FontPath     "/opt/X11R6/lib/X11/fonts/Type1/"
> 	FontPath     "/opt/X11R6/lib/X11/fonts/CID/"
> 	FontPath     "/opt/X11R6/lib/X11/fonts/75dpi/"
> 	FontPath     "/opt/X11R6/lib/X11/fonts/100dpi/"
> EndSection
>
> Section "Module"
> 	Load  "extmod"
> 	Load  "xie"
> 	Load  "pex5"
> 	Load  "glx"
> 	Load  "dbe"
> 	Load  "record"
> EndSection
>
> Section "InputDevice"
> 	Identifier  "Keyboard0"
> 	Driver      "keyboard"
> 	Option      "XkbRules" "xfree86"
> 	Option	    "XkbModel" "pc101"
> EndSection
>
> Section "InputDevice"
> 	Identifier  "Mouse0"
> 	Driver      "mouse"
> 	Option      "Protocol" "Microsoft"
> 	Option      "Device" "/dev/ser1"
> EndSection
>
> Section "Monitor"
> 	Identifier   "Monitor0"
> 	VendorName   "Monitor Vendor"
> 	ModelName    "Monitor Model"
> 	HorizSync    30-64
> 	VertRefresh  44-100
> EndSection
>
> Section "Device"
> 	Identifier "Card0"
> 	Driver      "ati"
> 	VendorName  "ATI"
> 	BoardName   "Mach64 GB"
> 	ChipSet     "ati"
> 	ChipId      0x4742
> 	ChipRev     0x5c
> 	BusID       "PCI:1:0:0"
> EndSection
>
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Card0"
> 	Monitor    "Monitor0"
> 	DefaultDepth 24
>
> 	SubSection "Display"
> 		Depth     1
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     4
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     8
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     15
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     16
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     24
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> EndSection
>
>
> _______________________________________________
> openqnx-developer mailing list
> openqnx-developer-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/openqnx-developer
>