RE: RE: list

Hi Frank,
Hi Sergey,

the option -Pr was the key for success!
I started the devi-hirun with it and all problems are gone :)
XFree86 4.2 is now working with my Rage 128 and a new PS/2 mouse.

Thanks for your support.

Armin


At 14:45 01.03.02 -0500, Frank Liu wrote:

>in my first post after creating this mailing list, I listed some
>installation instructions. you can read the mailing list archives at
>http://www.geocrawler.com/lists/3/SourceForge/16494/0/
>
>in particular, my post is here:
>http://www.geocrawler.com/archives/3/16494/2001/10/0/6822211/
>talks about how to start dev-hirun for PS2 or serial mouse.
>
>later on , chris posted a simplier explanation on the mouse part:
>http://www.geocrawler.com/archives/3/16494/2001/10/0/6878862/
>
>if they have alread read those archives, so my guess is their problem
>is probably something else?
>
>frank
>
>On Fri, 1 Mar 2002, Sergey Sobolev wrote:
>
> > Hi!
> > I had this problem too. Solution is simple:
> > Use devi-hirun driver for mouse device like that:
> > for PS2
> > /usr/photon/bin/devi-hirun -Pr ps2 mousedev
> > for serial mouse (I don't remeber exactly, so best if you will look into
> > documentation)
> > /usr/photon/bin/devi-hirun -Pr msoft fd -d/dev/ser1
> >
> > and setup mouse in XF86Config as
> > Section "InputDevice"
> >       Identifier  "Mouse0"
> >       Driver      "mouse"
> >       Option      "Device" "/dev/devi/mouse0"
> >  EndSection
> > Note: there must be no "Protocol" option - it lead to incorrect mouse work.
> > And once more - after running Photon mouse will not work (if you know 
> how to
> > fix this e-mail me please), so you will need to reboot after using Photon.
> >
> >       Regards,
> >       Sergey Sobolev
> >
> > > -----Original Message-----
> > > From: openqnx-developer-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> > > [mailto:openqnx-developer-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org]On Behalf
> > > Of Sergey Uvarov (by way of Jutta Steinhoff <[email protected]>)
> > > Sent: Friday, March 01, 2002 16:48
> > > To: openqnx-developer-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> > > Subject: Re: [Openqnx-developer] list
> > >
> > >
> > >
> > > - just redirected to the list.  Frank, Armin had the same problem, too.
> > >   Jutta
> > >
> > >
> > > Sergey Uvarov <[email protected]> wrote:
> > >
> > > Hi,
> > >
> > > I try to start XFree86-4.1 but haven't success.
> > > X-server is started and is blocked. When I am moving mouse it is
> > > working and when I am not moving mouse all X tasks are blocked.
> > > if file xinitrc or $HOME/.xinitrc exist X starts and
> > > exits. xinitrc and $HOME/.xinitrc I make empty.
> > >
> > > How can I solve this problem?Section "ServerLayout"
> > >     Identifier     "XFree86 Configured"
> > >     Screen      0  "Screen0" 0 0
> > >     InputDevice    "Mouse0" "CorePointer"
> > >     InputDevice    "Keyboard0" "CoreKeyboard"
> > > EndSection
> > >
> > > Section "Files"
> > >     RgbPath      "/opt/X11R6/lib/X11/rgb"
> > >     ModulePath   "/opt/X11R6/lib/modules"
> > >     FontPath     "/opt/X11R6/lib/X11/fonts/misc/"
> > >     FontPath     "/opt/X11R6/lib/X11/fonts/Speedo/"
> > >     FontPath     "/opt/X11R6/lib/X11/fonts/Type1/"
> > >     FontPath     "/opt/X11R6/lib/X11/fonts/CID/"
> > >     FontPath     "/opt/X11R6/lib/X11/fonts/75dpi/"
> > >     FontPath     "/opt/X11R6/lib/X11/fonts/100dpi/"
> > > EndSection
> > >
> > > Section "Module"
> > >     Load  "extmod"
> > >     Load  "xie"
> > >     Load  "pex5"
> > >     Load  "glx"
> > >     Load  "dbe"
> > >     Load  "record"
> > > EndSection
> > >
> > > Section "InputDevice"
> > >     Identifier  "Keyboard0"
> > >     Driver      "keyboard"
> > >     Option      "XkbRules" "xfree86"
> > >     Option      "XkbModel" "pc101"
> > > EndSection
> > >
> > > Section "InputDevice"
> > >     Identifier  "Mouse0"
> > >     Driver      "mouse"
> > >     Option      "Protocol" "Microsoft"
> > >     Option      "Device" "/dev/ser1"
> > > EndSection
> > >
> > > Section "Monitor"
> > >     Identifier   "Monitor0"
> > >     VendorName   "Monitor Vendor"
> > >     ModelName    "Monitor Model"
> > >     HorizSync    30-64
> > >     VertRefresh  44-100
> > > EndSection
> > >
> > > Section "Device"
> > >     Identifier "Card0"
> > >     Driver      "ati"
> > >     VendorName  "ATI"
> > >     BoardName   "Mach64 GB"
> > >     ChipSet     "ati"
> > >     ChipId      0x4742
> > >     ChipRev     0x5c
> > >     BusID       "PCI:1:0:0"
> > > EndSection
> > >
> > > Section "Screen"
> > >     Identifier "Screen0"
> > >     Device     "Card0"
> > >     Monitor    "Monitor0"
> > >     DefaultDepth 24
> > >
> > >     SubSection "Display"
> > >             Depth     1
> > >             Modes           "1024x768" "800x600" "640x480"
> > >     EndSubSection
> > >     SubSection "Display"
> > >             Depth     4
> > >             Modes           "1024x768" "800x600" "640x480"
> > >     EndSubSection
> > >     SubSection "Display"
> > >             Depth     8
> > >             Modes           "1024x768" "800x600" "640x480"
> > >     EndSubSection
> > >     SubSection "Display"
> > >             Depth     15
> > >             Modes           "1024x768" "800x600" "640x480"
> > >     EndSubSection
> > >     SubSection "Display"
> > >             Depth     16
> > >             Modes           "1024x768" "800x600" "640x480"
> > >     EndSubSection
> > >     SubSection "Display"
> > >             Depth     24
> > >             Modes           "1024x768" "800x600" "640x480"
> > >     EndSubSection
> > > EndSection
> > >