Re: E450 and external scsi
Craig Dewick <[email protected]>
| Newsgroups | gmane.os.solaris.at-home |
|---|---|
| Message-ID | <[email protected]> |
On Sun, 9 Sep 2007, David Barnes wrote: > Hi All; > I just picked up an E450, (only has 4 internal drives) and I want to attach a > Sun multipack to it... what should I be looking for for a supported PCI scsi > controller? One of the dual-channel Symbios 22801 cards would be ideal, or one of the PCI SunSwift cards with single-channel SCSI + ethernet (x1032a) will do the job too. Sun supports the 22801 card as the x6540a (and the 22802 which is the HVD version of it as X6541a). Both those cards have a pair of VHDCI connectors for external devices. Sun also supports single-channel Symbios 8751 card (x5010a). The 8951 cards should also work but some of the 8951's have a revision of the Symbios ASIC that the 'glm' driver doesn't support. The 'glm' driver will work with just about all PCI SCSI cards using the 53c875, 53c876, and related ASIC's. I've tested a varied bunch of non-Sun PCI SCSI cards without many problems. Some of the ones which the 'glm' driver doesn't work with have 3rd-party device drivers though that's not the best solution unless those cards give you a feature you can't get with run of the mill Symbios/LSI-based SCSI cards. The system handbook section on Sun-supported SCSI cards is at: ttp://www.sunshack.org/data/sh/2.1/infoserver.central/data/syshbk/Devices/SCSI/SCSI_TOC.html Check the PCI section. Lots more than those will work, but grab a Sun-barcoded card if you want to be sure. Craig. -- Post by Craig Dewick (tm). Web @ "http://lios.apana.org.au/~cdewick". Email 2 "[email protected]". SunShack @ "http://www.sunshack.org" Galleries @ "http://www.sunshack.org/gallery2". Also lots of tech data, etc. Sun Microsystems webring at "http://n.webring.com/hub?ring=sunmicrosystemsu".