Re: Sun V880 not starting after transport

On Wed, 23 Mar 2011, Dirk Stapels wrote:

> Hi,
>
> I moved recently and we had to carry my v880 around. Now it doesn't start 
> anymore. Power supplies show green on AC, after switching machine on also on 
> DC, so can be assumed working fine. Cardcage lights are fine, but maintenance 
> lights in CPU cage don't come on. Also, only power light lights up, but the 
> other two won't do anything. Anyone an idea what the problem could be?

Aah, the V880. Lovely machine. Must be upsetting to have it acting up.

The CPU boards in the 880 aren't the most rock-solid. I've had them appear 
to be seated correctly but not functioning and experience says to give 'em 
a slap in the centre of the board after installation and then give each 
screw a further half-turn.

Strip all your CPU boards out and re-install one board in slot A. Really 
make sure it's seated. Re-power and it should hopefully come to life for 
you.

I'd re-seat everything just to be sure and power the machine on in the 
diagnostic position to increase your chances of getting some inspiration 
from the box if it's unhappy. You might want to see if the RSC is booting 
to ensure power is being properly distributed.

-- 
Andre van Eyssen.
mail: [email protected]          jabber: [email protected]
purplecow.org: UNIX for the masses http://www2.purplecow.org
purplecow.org: PCOWpix             http://pix.purplecow.org