Re: JUNK MAIL Sun 3/60 SCSI issues

Magnus Lindholm <[email protected]> Sun, 1 Sep 2013 21:29:10 +0200
Newsgroups	gmane.os.solaris.at-home
Message-ID	<[email protected]>
--===============2349182004199879910==
Content-Type: multipart/alternative; boundary="Apple-Mail=_1ABCB2EB-47D2-4C50-B2A2-8D9AA244AD7A"


--Apple-Mail=_1ABCB2EB-47D2-4C50-B2A2-8D9AA244AD7A
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
	charset=windows-1252

Hi all,

I remember having some trouble hooking up some scsi drives to my sun =
3/60. Seemed like the sun 3/60 scsi controller did not issue the spin-up =
command to the disk at power on, so I had to set the auto-spinup jumper =
on the drive itself. Not all drives had such a jumper though=85

/Magnus


On Sep 1, 2013, at 6:57 AM, "Kurt M. Nowak" <[email protected]> =
wrote:

> Hi all,
>=20
> I have a Sun 3/60 and I hooked up a terminated 411 box with a Sun D-50 =
to HD-50 cable and a Sun terminator. The LED on the terminator does not =
come on when I power on the machine. I did some diagnostics using the =
loopback connector mentioned in Sun3Arc.org and I get an error message =
(see the end of the test output). The other tests (b,c,s and u) all are =
ok...its the external loopback test that I have problems with. I know =
its not the cable, because it works on another machine. Someone =
mentioned that I might have a faulty fuse, but both of the two fuses on =
the board are ok.=20
> Any guidance would be greatly appreciated!
>=20
> -Kurt
>=20
>=20
>=20
>=20
> Boot PROM Monitor Commands
>=20
> =
--------------------------------------------------------------------------=
--
> a [digit]                               | Open CPU Addr Reg (0-7)
> b [dev([cntrl],[unit],[part])]          | Boot a file
> c [addr]                                | Continue program at Addr
> d [digit]                               | Open CPU Data Reg (0-7)
> e [addr]                                | Open Addr as 16 bit word
> f beg_addr end_addr pattn [size]        | Fill Memory
> g [addr]                                | Go to Addr
> h                                       | Help Menu
> k [number]                              | Reset (0)CPU, (1)MMU, =
(2)System
> l [addr]                                | Open Addr as 32 bit long
> m [addr]                                | Open Segment Map
> o [addr]                                | Open Addr as 8 bit byte
> p [addr]                                | Open Page Map
> q [addr]                                | Open EEPROM
> r                                       | Open CPU Regs (i.e. PC)
> s [digit]                               | Set/Query Function Code =
(0-7)
> t [y/n/c]                               | Trace: Yes/No/Continue
> u [arg]                                 | Select Console Device
> v beg_addr end_addr [size]              | Display Memory
> w [addr] [string]                       | Vector
> x                                       | Extended Diag Tests
> z [addr]                                | Set Breakpoint
> =
--------------------------------------------------------------------------=
--
>=20
> >x
>=20
>=20
> Extended Test Menu:  (Enter 'q' to return to Monitor)
>=20
> Cmd -  Test
>=20
>   ae - Ethernet Test
>   kb - Keyboard Input Test
>   me - Memory Test
>   mk - Mouse/Keyboard Ports Test
>   rs - Serial Ports Test
>   sd - SCSI Disk Bootpath Test
>   si - SCSI Interface Test
>   st - SCSI Tape Bootpath Test
>   vm - Video (Monochrome) Test
>   vc - Video (Color) Test
>   ve - Video Enable Plane Test
>   cm - Color Map Test
>   vo - Video Overlay Plane Test
>=20
> Cmd=3D>si
>=20
> SCSI Interface Tests:  (Enter 'q' to return to Test Menu)
>=20
> Cmd -  Test
>=20
>   b - SCSI Byte Ctr Wr/Rd Test
>   c - SCSI CS Reg Wr/Rd Test
>   s - SBC Chip Wr/Rd Test
>   u - 9516 UDC Chip Wr/Rd Test
>   x - SCSI Bus External Loopback Test
>=20
> Cmd=3D>x
>=20
> Test Options: (Enter 'q' to return to Test Menu)
>=20
> Cmd  -  Option
>=20
>  f   -  Loop forever
>  h   -  Loop forever with Halt on error
>  l   -  Loop once with Loop on error
>  n   -  Loop forever with error messages inhibited
> <cr> -  Loop once
>=20
> Cmd=3D>
>=20
> SCSI Loopback Error: all signals shld be off(high) exp 0, obs 80
> SCSI Loopback Error: Signals:ACK,BSY,SEL,ATN,REQ,MSG,C/D,I/O: exp F0, =
obs 90
> SCSI Loopback Error: Signals:ACK,BSY,SEL,ATN,REQ,MSG,C/D,I/O: exp F, =
obs C2
> Test failed during pass 1.  Total errors =3D 1.
>=20
> SCSI Interface Tests:  (Enter 'q' to return to Test Menu)
> _______________________________________________
> Suns-at-Home mailing list
> [email protected]
> http://www.net-kitchen.com/mailman/listinfo/suns-at-home


--Apple-Mail=_1ABCB2EB-47D2-4C50-B2A2-8D9AA244AD7A
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
	charset=windows-1252

<html><head><meta http-equiv=3D"Content-Type" content=3D"text/html =
charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">Hi =
all,<div><br></div><div>I remember having some trouble hooking up some =
scsi drives to my sun 3/60. Seemed like the sun 3/60 scsi controller did =
not issue the spin-up command to the disk at power on, so I had to set =
the auto-spinup jumper on the drive itself. Not all drives had such a =
jumper =
though=85</div><div><br></div><div>/Magnus</div><div><br></div><div><br></=
div><div><div><div>On Sep 1, 2013, at 6:57 AM, "Kurt M. Nowak" &lt;<a =
href=3D"mailto:[email protected]">[email protected]</a>&gt; =
wrote:</div><br class=3D"Apple-interchange-newline"><blockquote =
type=3D"cite">
 =20

    <meta http-equiv=3D"content-type" content=3D"text/html; =
charset=3DISO-8859-1">
 =20
  <div bgcolor=3D"#FFFFFF" text=3D"#000000">
    <font face=3D"Courier New, Courier, monospace">Hi all,<br>
      <br>
      I have a Sun 3/60 and I hooked up a terminated 411 box with a Sun
      D-50 to HD-50 cable and a Sun terminator. The LED on the
      terminator does not come on when I power on the machine. I did
      some diagnostics using the loopback connector mentioned in
      <a href=3D"http://Sun3Arc.org">Sun3Arc.org</a> and I get an error =
message (see the end of the test
      output). The other tests (b,c,s and u) all are ok...its the
      external loopback test that I have problems with. I know its not
      the cable, because it works on another machine. Someone mentioned
      that I might have a faulty fuse, but both of the two fuses on the
      board are ok. <br>
      Any guidance would be greatly appreciated!<br>
      <br>
      -Kurt<br>
      <br>
      <br>
      <br>
      <br>
      Boot PROM Monitor Commands<br>
      <br>
=
--------------------------------------------------------------------------=
--<br>
      a =
[digit]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&=
nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb=
sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Open CPU Addr Reg (0-7)<br>
      b =
[dev([cntrl],[unit],[part])]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp; | Boot a file<br>
      c =
[addr]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Continue program at =
Addr<br>
      d =
[digit]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&=
nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb=
sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Open CPU Data Reg (0-7)<br>
      e =
[addr]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Open Addr as 16 bit =
word<br>
      f beg_addr end_addr pattn =
[size]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Fill Memory<br>
      g =
[addr]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Go to Addr<br>
      =
h&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&=
nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb=
sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp=
;&nbsp; | Help Menu<br>
      k =
[number]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;=
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Reset (0)CPU, (1)MMU,
      (2)System<br>
      l =
[addr]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Open Addr as 32 bit =
long<br>
      m =
[addr]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Open Segment Map<br>
      o =
[addr]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Open Addr as 8 bit =
byte<br>
      p =
[addr]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Open Page Map<br>
      q =
[addr]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Open EEPROM<br>
      =
r&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&=
nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb=
sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp=
;&nbsp; | Open CPU Regs (i.e. PC)<br>
      s =
[digit]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&=
nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb=
sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Set/Query Function Code
      (0-7)<br>
      t =
[y/n/c]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&=
nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb=
sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Trace: Yes/No/Continue<br>
      u =
[arg]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb=
sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp=
;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Select Console =
Device<br>
      v beg_addr end_addr =
[size]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp; | Display Memory<br>
      w [addr] =
[string]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;=
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | =
Vector<br>
      =
x&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&=
nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb=
sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp=
;&nbsp; | Extended Diag Tests<br>
      z =
[addr]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; | Set Breakpoint<br>
=
--------------------------------------------------------------------------=
--<br>
      <br>
      &gt;x<br>
      <br>
      <br>
      Extended Test Menu:&nbsp; (Enter 'q' to return to Monitor)<br>
      <br>
      Cmd -&nbsp; Test<br>
      <br>
      &nbsp; ae - Ethernet Test<br>
      &nbsp; kb - Keyboard Input Test<br>
      &nbsp; me - Memory Test<br>
      &nbsp; mk - Mouse/Keyboard Ports Test<br>
      &nbsp; rs - Serial Ports Test<br>
      &nbsp; sd - SCSI Disk Bootpath Test<br>
      &nbsp; si - SCSI Interface Test<br>
      &nbsp; st - SCSI Tape Bootpath Test<br>
      &nbsp; vm - Video (Monochrome) Test<br>
      &nbsp; vc - Video (Color) Test<br>
      &nbsp; ve - Video Enable Plane Test<br>
      &nbsp; cm - Color Map Test<br>
      &nbsp; vo - Video Overlay Plane Test<br>
      <br>
      Cmd=3D&gt;si<br>
      <br>
      SCSI Interface Tests:&nbsp; (Enter 'q' to return to Test Menu)<br>
      <br>
      Cmd -&nbsp; Test<br>
      <br>
      &nbsp; b - SCSI Byte Ctr Wr/Rd Test<br>
      &nbsp; c - SCSI CS Reg Wr/Rd Test<br>
      &nbsp; s - SBC Chip Wr/Rd Test<br>
      &nbsp; u - 9516 UDC Chip Wr/Rd Test<br>
      &nbsp; x - SCSI Bus External Loopback Test<br>
      <br>
      Cmd=3D&gt;x<br>
      <br>
      Test Options: (Enter 'q' to return to Test Menu)<br>
      <br>
      Cmd&nbsp; -&nbsp; Option<br>
      <br>
      &nbsp;f&nbsp;&nbsp; -&nbsp; Loop forever<br>
      &nbsp;h&nbsp;&nbsp; -&nbsp; Loop forever with Halt on error<br>
      &nbsp;l&nbsp;&nbsp; -&nbsp; Loop once with Loop on error<br>
      &nbsp;n&nbsp;&nbsp; -&nbsp; Loop forever with error messages =
inhibited<br>
      &lt;cr&gt; -&nbsp; Loop once<br>
      <br>
      Cmd=3D&gt;<br>
      <br>
      SCSI Loopback Error: all signals shld be off(high) exp 0, obs =
80<br>
      SCSI Loopback Error: Signals:ACK,BSY,SEL,ATN,REQ,MSG,C/D,I/O: exp
      F0, obs 90<br>
      SCSI Loopback Error: Signals:ACK,BSY,SEL,ATN,REQ,MSG,C/D,I/O: exp
      F, obs C2<br>
      Test failed during pass 1.&nbsp; Total errors =3D 1.<br>
      <br>
      SCSI Interface Tests:&nbsp; (Enter 'q' to return to Test =
Menu)</font><br>
  </div>

_______________________________________________<br>Suns-at-Home mailing =
list<br><a =
href=3D"mailto:[email protected]">[email protected]<=
/a><br>http://www.net-kitchen.com/mailman/listinfo/suns-at-home<br></block=
quote></div><br></div></body></html>=

--Apple-Mail=_1ABCB2EB-47D2-4C50-B2A2-8D9AA244AD7A--

--===============2349182004199879910==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
Suns-at-Home mailing list
[email protected]
http://www.net-kitchen.com/mailman/listinfo/suns-at-home

--===============2349182004199879910==--