Qlogic HBA not seen on Sun Fire 280R running S9

I have a Sun Microsystems Host Adapter 375-3108 SG-XPCI2FC-QF dual port HBA
installed in a Sun Fire 280R, prtdiag sees the card, however, I can't
connect to the SAN via it.

I came across this web page:


and ran the commands therein:

bash-2.05#  luxadm -e port

Found path to 1 HBA ports

/devices/pci@8,600000/SUNW,qlc@4/fp@0,0:devctl                     CONNECTED
 (this is the internal one - the PCI cards are not to be seen)

I have downloaded and installed the latest patches, this is running Solaris
9

prtdiag -v

<snip>
========================= IO Cards =========================


                         Bus  Max
     IO   Port Bus       Freq Bus  Dev,
Brd  Type  ID  Side Slot MHz  Freq Func State
Name                              Model
---- ---- ---- ---- ---- ---- ---- ---- -----
--------------------------------  ----------------------
I/O   PCI   8    B    3    33   33  2,0  ok
pci-pci1011,25.4/pci108e,1000     PCI-BRIDGE
I/O   PCI   8    B    3    33   33  0,0  ok
pci108e,1000-pci108e,1000.1       device on pci-bridge
I/O   PCI   8    B    3    33   33  0,1  ok
SUNW,qfe-pci108e,1001             SUNW,pci-qfe/pci-bridg+
I/O   PCI   8    B    3    33   33  1,0  ok
pci108e,1000-pci108e,1000.1       device on pci-bridge
I/O   PCI   8    B    3    33   33  1,1  ok
SUNW,qfe-pci108e,1001             SUNW,pci-qfe/pci-bridg+
I/O   PCI   8    B    3    33   33  2,0  ok
pci108e,1000-pci108e,1000.1       device on pci-bridge
I/O   PCI   8    B    3    33   33  2,1  ok
SUNW,qfe-pci108e,1001             SUNW,pci-qfe/pci-bridg+
I/O   PCI   8    B    3    33   33  3,0  ok
pci108e,1000-pci108e,1000.1       device on pci-bridge
I/O   PCI   8    B    3    33   33  3,1  ok
SUNW,qfe-pci108e,1001             SUNW,pci-qfe/pci-bridg+
I/O   PCI   8    B    2    33   33  3,0  ok
SUNW,qlc-pci1077,2312.1077.10a.2+
I/O   PCI   8    B    2    33   33  3,1  ok
SUNW,qlc-pci1077,2312.1077.10a.2+
I/O   PCI   8    A    1    66   66  1,0  ok
fibre-channel-pci1077,2312.1077.+

<snip>