Zone in HBA without a reboot

All,

I have a Solaris 9 V890 with a pair of Qlogic dual port HBA's. One port on
each HBA is zoned into "VSAN A" and has been for years.  I need to configure
the second port on each HBA to a different fabric (VSAN B) so I can start
migrating storage to the new array (vxevac).

Is there any way to configure the second ports without rebooting?  They have
been zoned up and the storage team can see the WWNs at the switch (9509) but
the VSAN doesn't see the HBA's yet.  I've run devfsadm and cfgadm configures
but  c2&c4 remain in an unconfigured state.  The backend is 3Par.  Any
suggestions?

#cfgadm -al|egrep '^c2|^c4|^c3|^c5'
c2                             fc           connected    unconfigured unknown
c3                             fc-fabric    connected    configured   unknown
c3::27540002ac0036e9           disk         connected    configured   unknown
c4                             fc           connected    unconfigured unknown
c5                             fc           connected    configured   unknown
c5::26510002ac0036e9           disk         connected    configured   unknown

#luxadm -e port
/devices/pci@8,600000/SUNW,qlc@2/fp@0,0:devctl                     CONNECTED
/devices/pci@9,600000/SUNW,qlc@1/fp@0,0:devctl                     NOT
CONNECTED
/devices/pci@9,600000/SUNW,qlc@1,1/fp@0,0:devctl                   CONNECTED
/devices/pci@9,600000/SUNW,qlc@2/fp@0,0:devctl                     NOT
CONNECTED
/devices/pci@9,600000/SUNW,qlc@2,1/fp@0,0:devctl                  CONNECTED

Thanks,
Bob
FIRST TENNESSEE

Confidentiality notice:
This e-mail message, including any attachments, may contain legally privileged
and/or confidential information. If you are not the intended recipient(s), or
the employee or agent responsible for delivery of this message to the intended
recipient(s), you are hereby notified that any dissemination, distribution, or
copying of this e-mail message is strictly prohibited. If you have received
this message in error, please immediately notify the sender and delete this
e-mail message from your computer.