RA3000 rebuild problems
"Bjorn S. Nilsson" <[email protected]>
| Newsgroups | gmane.os.tru64.managers |
|---|---|
| Message-ID | <[email protected]> |
Dear Managers, We have a 5 year old RA 3000 Storage subsystem on an XP1000 with Digital UNIX V4.0G. For the first time, last Sunday there was a disk crashing. This disk was a member of a 6-disk RAID-5 system. The disk, a DS-RZ1FC-VW was replaced by a, according to HP, fully compatible DS-RZ1FC-SW disk. It is now on-line according to email notification and I can see it in the command console on a PC. I would then have expected that the RAID-5 system should rebuild automatically. It does not. The replacement disk is shown as belonging to no disk system. Can anybody help me with a hint of what should be done to make the replacement disk part of the RAID-5 system again without re- initializing the whole array? TIA, Bjorn ==================================================================== Bjorn S. Nilsson Email: [email protected] Niels Bohr Institute or just [email protected] Blegdamsvej 17 Phone: +45 35325283 DK-2100 Copenhagen CellPhone: +45 28755283 Denmark Fax: +45 35325016