add disk failure
Christian Wessely <[email protected]>
| Newsgroups | gmane.os.tru64.managers |
|---|---|
| Organization | University Graz |
| Message-ID | <[email protected]> |
Hello Admin Wizards,
after trying to add a DS-RZ1FC-VW Disk in my SW300 storage shelf (HSZ40
- DEC Alpha Server 1000/366, True64 4.0g) i got the following message:
HSZ_UNTEN > add disk DISK510 5 1 0
HSZterm: No sense data available.
HSZterm: ASC = 0, ASQ = 0.
HSZterm: No sense data available.
HSZterm: ASC = 0, ASQ = 0.
HSZterm: No sense data available.
HSZterm: ASC = 0, ASQ = 0.
Warning 9030: Cannot determine if the correct device type is at the PTL
specified
Temperature within optimum limit.
SWAP signal cleared - all SWAP interrupts re-enabled
HSZ_UNTEN >
The disk drive´s amber LED blinks.
Does that mean the disk is useless for this environment?
Thanks for a short reply
CW