Problem with DS-KZPCC-AC and ES40/Tru64 5.1B-PK3

Hummel Thomas <[email protected]>
Newsgroups gmane.os.tru64.managers
Message-ID <[email protected]> 
Hi Managers,

we have an ES40 (2 x 833Mhz) with 4 GB Ram, Tru64 5.1B-PK3, Alpha Firmware 6.6-19. I installed a DS-KZPCC-AC (Firmware CQ17) and connected it to the internal drive cage DS-610-6D. The 3 x HP 72 GB 10k Hotplug SCSI Drives are configured as a RAIS 5. But neither in /devices/disk nor in the disk-app in CDE are entries of the RAID-Volume.

On console the volume and the controller are shown as follows:

dza517.0.0.2004.1		DZA517 (BSA)
pza0.0.0.2004.1			I2OA0


Any ideas why the volume doesn't appear? Normally dsfmgr have to create the /dev entries at boot time, right? TIA.


Best regards,
Thomas Hummel
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.