SUMMARY: RMC for DS15 (Remote Management)
"Siebert, Aaron" <[email protected]>
| Newsgroups | gmane.os.tru64.managers |
|---|---|
| Message-ID | <5C27B2F8693FA3458E71B4A81551253F85203E@NSTAR-MAIL1.windows.nagrastar.com> |
Thanks to Tim Cutts, Alan Davis and Oisin McGuinness for their responses. The responses were very similar but I will quote Alan Davis. "RMC is documented in the Owner's Guide that should be on your DS15 support CD that came with the server and is also available here : http://h18002.www1.hp.com/alphaserver/download/ek-ds150-og-a01-web.pdf There is no direct way to connect the com port to a TCP/IP network. It's common practice, however, to use something like a DecServer900TM or Cisco 2509RJ asynch router or one of the Raritan or other remote console boxes to aggregate the serial consoles and allow telnet access to them. I use both DecServers (32 ports, available from www.dnpg.com) and the Cisco 2509RJ and 2511 (16 port) to give me remote serial console access to Alphaservers, DLnnn Linux servers, network switches and firewalls, etc. I use ConsoleWorks from TDi for most of it but am looking at converting them all to use conserver (www.conserver.com) to manage the remote GUI and logging. RMC has a very limited set of functions. It's not like the iLO management that gives you PC-like capabilities. RMC allows you to halt in, halt out, and power cycle the server. It monitors and can display hardware environment, fan speed, temp, etc. I can be configured to dial out if defined thresholds are exceeded and send limited status messages. For most installations the serial console feature is more useful with RMC only being used as a last resort to remotely reboot a hung server." -----Original Message----- From: Siebert, Aaron Sent: Wednesday, September 28, 2005 5:39 PM To: '[email protected]' Subject: RMC for DS15 (Remote Management) Managers, We are looking to the RMC to provide basic administration functions for a large pool of Alphaserver DS15s. I have not tested or used this feature previously. Can anyone offer documentation references for configuration of the RMC? Does anyone know if Ethernet could be substituted somehow for the modem connection to the com port? TIA Regards, Aaron Siebert Nagrastar Project Lead [email protected] D - 3037065492 F - 3037065719