Problem removing a volume

Hi admins,

I'm having problems removing a volume from an ADVFS domain.
The rmvol command appears to be hung, sitting at 99.9% CPU.

After leaving the command to run for around 19 hours (a little excessive 
for a 26GB volume) I CTRL-C'd the rmvol.

I now see this output from showfdmn which appears to show there's still 
some data on dsk2c which I'm trying to remove.

# showfdmn -k lynx1

                Id              Date Created  LogPgs  Version  Domain Name
3f229547.000dfe6a  Sat Jul 26 15:50:47 2003     512        4  lynx1

   Vol    1K-Blks        Free  % Used  Cmode  Rblks  Wblks  Vol Name
    1L   26658816     8697520     67%     on    128    128  /dev/disk/dsk1c
    2    26658816    26403888      1%     on    128    128  /dev/disk/dsk2c
    3    62914560    29026656     54%     on    256    256 
/dev/disk/dsk212c
       ----------  ----------  ------
        116232192    64128064     45%


I then balanced the domain, and ran the rmvol again - but this hung 
again in a similar fashion. I then defragmented the domain and ran the 
rmvol again, but once again it hung.


Running rmvol -v shows pages of output like this:

rmvol: Moving file
     file name: <unknown> (setTag: 1.32769 (0x1.0x8001), tag: 1.32769 
(0x1.0x8001))
     no pages moved
rmvol: Moving file
     file name: <unknown> (setTag: 1.32769 (0x1.0x8001), tag: 1.32769 
(0x1.0x8001))
     no pages moved
rmvol: Moving file
     file name: <unknown> (setTag: 1.32769 (0x1.0x8001), tag: 1.32769 
(0x1.0x8001))
     no pages moved

Any ideas how I can get the rmvol to complete....?
OS is 5.1B pk2.

Cheers,

Rob


This message is intended only for the use of the person(s) ("The intended
Recipient(s)") to whom it is addressed.  It may contain information which
is privileged and confidential within the meaning of applicable law.  If
you are not the intended recipient, please contact the sender as soon as
possible.  The views expressed in this communication are not necessarily
those held by LYNX Express, a UPS Company.