SUMMARY: LSM recovering after error OK, what about FAILING in volprint ?

Johns  finding answers my question.:
(why didn't I look there... ?  ;-)  )

# man voledit      # !!!



Lanier, John skrev:
> Hello,
>
> I found the following while looking at "man voledit":
>
>
> ...
>
>  /sbin/voledit [-g diskgroup] [-e pattern] [-vpsdGrf] set attribute=value...
>   [name...]
>
>
> ...
>
>
> failing
>           Sets (on) or clears (off) the disk failing flag. If the failing
>           flag is set for a disk, the disk space is not used as free space or
>           used by the hot-sparing facility.
>
>
> ...
>
>
> So the syntax looks to be as follows:
>
>
> ...
>
> dm dsk3g        dsk3g        simple   4096     15918532 FAILING <--
> dm dsk3h        dsk3h        simple   4096     15918532 FAILING <--
>
> ...
>
>
> /sbin/voledit set failing=off cluster_usrvol <--uses "dsk3g"
> /sbin/voledit set failing=off cluster_varvol <--uses "dsk3h"
>
>
> Hope this helps,
>
> --John Lanier
>
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On Behalf Of "Martin Rønde Andersen - mail.dk"
> Sent: Saturday, January 12, 2008 1:54 PM
> To: [email protected]
> Subject: LSM recovering after error OK, what about FAILING in volprint ?
>
> Hello all ..
>
> I have the following problem:
>
> After this cluster have had problems in the dual HSG80 SAN , the disks are in place again.
> BUT two partitions of the one side, has a FAILING beside the definition.
> How do I et rid of the FAILING ?
>
> I assume that things are OK, looking down the list of ACTIVE plexes, but I want to get the errors away, because I fear that this is giving me problems when I want to move the rootvol, usrvol and varvol with cfs commands.
>
> Moreover, where does this come from ?
>
> I also have a datadg disk with the same fenomen.
>
> Here is the volprint output for rootdg:
>
> * volprint rootdg *
>
> ------------------------------------------------------------------------
>
> DG NAME         NCONFIG      NLOG     MINORS   GROUP-ID
> DM NAME         DEVICE       TYPE     PRIVLEN  PUBLEN   STATE
> V  NAME         USETYPE      KSTATE   STATE    LENGTH   READPOL   PREFPLEX
> PL NAME         VOLUME       KSTATE   STATE    LENGTH   LAYOUT    NCOL/WID MODE
> SD NAME         PLEX         DISK     DISKOFFS LENGTH   [COL/]OFF DEVICE   MODE
>
> dg rootdg       default      default  0        1081008785.1026.bivaclu
>
> dm dsk3b        dsk3b        simple   4096     2995888  -
> dm dsk3g        dsk3g        simple   4096     15918532 FAILING
> dm dsk3h        dsk3h        simple   4096     15918532 FAILING
> dm dsk24b       dsk24b       simple   4096     2995888  -
> dm dsk24g       dsk24g       simple   4096     15918532 -
> dm dsk24h       dsk24h       simple   4096     15918532 -
>
> v  cluster_rootvol cluroot   ENABLED  ACTIVE   2995888  SELECT    -
> pl cluster_rootvol-01 cluster_rootvol ENABLED ACTIVE 2995888 CONCAT -      RW
> sd dsk24b-01    cluster_rootvol-01 dsk24b 0    2995888  0         dsk24b   ENA
> pl cluster_rootvol-02 cluster_rootvol ENABLED ACTIVE 2995888 CONCAT -      RW
> sd dsk3b-01     cluster_rootvol-02 dsk3b 0     2995888  0         dsk3b    ENA
>
> v  cluster_usrvol fsgen      ENABLED  ACTIVE   15918532 SELECT    -
> pl cluster_usrvol-01 cluster_usrvol ENABLED ACTIVE 15918532 CONCAT -       RW
> sd dsk24g-01    cluster_usrvol-01 dsk24g 0     15918532 0         dsk24g   ENA
> pl cluster_usrvol-02 cluster_usrvol ENABLED ACTIVE 15918532 CONCAT -       RW
> sd dsk3g-01     cluster_usrvol-02 dsk3g 0      15918532 0         dsk3g    ENA
>
> v  cluster_varvol fsgen      ENABLED  ACTIVE   15918532 SELECT    -
> pl cluster_varvol-01 cluster_varvol ENABLED ACTIVE 15918532 CONCAT -       RW
> sd dsk24h-01    cluster_varvol-01 dsk24h 0     15918532 0         dsk24h   ENA
> pl cluster_varvol-02 cluster_varvol ENABLED ACTIVE 15918532 CONCAT -       RW
>
>
>
>
> sd dsk3h-01     cluster_varvol-02 dsk3h 0      15918532 0         dsk3h    ENA
>
>
>
>
>
>