Re: LTR Trunking
Clark <[email protected]>
| Newsgroups | gmane.recreation.radio.hardware.bc250d |
|---|---|
| Message-ID | <[email protected]> |
Some information on LTR systems here http://home.hvc.rr.com/bpetrow/ltr.htm The frequencies usually are not in consectutive order. An example for a five frequency system...... 1,5,9,11 and 13. The PRO-97 has a feature called "repeater finder" which does help some. Clark At 12:00 PM 11/12/2005, you wrote: >Would anyone have the time to assist me with learning the LTR trunking. > >I have the freq. of the operation I want to listen to, have them programmed >according to lowest to highest freq and do hear traffic. > >However, I can't get audio when the LTR address shows on the screen. > >Also, the address shown, ie 0-01-012 shows up on a different repeater than >the one I think it should, assuming that 0-01 is the number 1 repeater. > >When I go to the FCC ULS site, they list freq in an order and I have also >programmed them into the radio in that order, still with no luck. > >Any off-line help would be appreceated. > >contact: [email protected] > >Thank you!! > >Mike [Non-text portions of this message have been removed] ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/DLTolB/TM --------------------------------------------------------------------~-> If you have come here to find out about the 250D you have come to the right place! In fact the discussion of the BC-250D and how it works is the only acceptable topic on this list. Any discussion about anything other than the BC-250D is OFF TOPIC. I hope this is clear to all group members.. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/UnidenBC250D/ <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/